September 2012 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] armStoneA8: Failed to mount /dev
by Andreas Färber 02 Dec '12

02 Dec '12

Hello, On the armStoneA8 board, using NBoot V14 and U-Boot, I'm trying to boot the downstream 3.3.7 kernel (BSP V1.1) from SD with a LimeJeOS rootfs on SD. I had to reconfigure the kernel with CONFIG_LBDAF to mount the ext3[*] rootfs r/w. This is what I get now: [...] mmc0: new high speed SDHC card at address b368 IPv6 over IPv4 tunneling driver mmcblk0: mmc0:b368 NCard 7.48 GiB NET: Registered protocol family 17 can: controller area network core (rev 20090105 abi 8) mmcblk0: p1 NET: Registered protocol family 29 can: raw protocol (rev 20090105) can: broadcast manager protocol (rev 20090105 t) Registering the dns_resolver key type VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p1): using internal journal EXT3-fs (mmcblk0p1): recovery complete EXT3-fs (mmcblk0p1): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) on device 179:1. Freeing init memory: 148K Failed to mount /dev: No such device Our rootfs definitely contains /dev, so what is this complaining about? Thanks, Andreas [*] U-Boot seemed to hang loading zImage from ext4. -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 6

[opensuse-arm] Question regrading openSUSE:Factory:ARM:*
by Joop Boonen 19 Oct '12

19 Oct '12

Hi all, Today I notice that sub projects of openSUSE:Factory:ARM: exist on OBS. I would like to know what the policy is of these sub-projects. Would like to know if it would be possible to get a AC100 sub-project, for AC100 specific packages like kernel, image etc? Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 8

[opensuse-arm] openSUSE 12.2 Beta/Warmup for Release Candidates
by Dirk Müller 13 Oct '12

13 Oct '12

Hi, over the weekend we've built 12.2 images and smoke-tested them on one board (Panda). The images are here: http://download.opensuse.org/repositories/openSUSE:/12.2:/ARM/images/ We plan to announce them later as Release Candiate 1. If you own a Pandaboard, BeagleBoard or an EfikaMX, please give them a try. the Vexpress ones are iirc also completely untested so far. Any feedback (positive or negative) is highly welcome. Thanks! Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 15

[opensuse-arm] libqt4 failed
by Guillaume GARDET 08 Oct '12

08 Oct '12

Hi, libqt4 failed to build for both armv5 and armv7 in Factory. For armv7, it seems to be due to build-armv7-with-double-qreal.diff patch which lead to a double declaration of a function. I think we should instead use "-fpu no" (or softvfp, vfpv2 or softvfp+vfpv2?) option for configure? But I am not sure it will be really used. For armv5, the compiler does not find the file "bits/c++config.h" whereas the package libstdc++47-devel is installed: ******************************************************************************** [ 531s] In file included from /home/abuild/rpmbuild/BUILD/qt-everywhere-opensource-src-4.8.2/include/QtCore/../../src/corelib/tools/qlist.h:58:0, [ 531s] from /home/abuild/rpmbuild/BUILD/qt-everywhere-opensource-src-4.8.2/include/QtCore/qlist.h:1, [ 531s] from /home/abuild/rpmbuild/BUILD/qt-everywhere-opensource-src-4.8.2/include/QtCore/../../src/corelib/tools/qstringlist.h:47, [ 531s] from /home/abuild/rpmbuild/BUILD/qt-everywhere-opensource-src-4.8.2/include/QtCore/qstringlist.h:1, [ 531s] from project.h:45, [ 531s] from option.h:45, [ 531s] from property.cpp:43: [ 531s] /usr/armv5el-suse-linux-gnueabi/usr/include/c++/4.7/new:41:28: fatal error: bits/c++config.h: No such file or directory ******************************************************************************** Any idea why? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

6 20

[opensuse-arm] Linaro Connect 29Oct-02Nov
by Andrew Wafaa 01 Oct '12

01 Oct '12

Aloha all, I was wondering if anyone was attending Linaro Connect[0] next month in Copenhagen? There will be numerous tracks of interest and also a cross-distro session. I will be there but was wondering if anyone else, especially from the SUSE engineering side. Regards, Andy 0 - http://connect.linaro.org/events/event/lce12-copenhagen/ -- Andrew Wafaa - Principal Engineer, Open Source - ARM Ltd. Tel: +44 1223 405981 Mob: +44 7974 074546 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] openSUSE 12.2 on a Gumstix Overo Fire notes
by Tim Serong 25 Sep '12

25 Sep '12

Hi All, I'm posting this for posterity - I had a late Hackweek last week, during which I was able to get openSUSE 12.2 running on my Gumstix Overo fire, with help from Alex on IRC. Here's the notes from my first run: http://ourobengr.com/2012/09/opensuse-12-2-gumstix-overo-fire/ And here's the notes about my subsequent "real" JeOS image: http://ourobengr.com/2012/09/a-real-opensuse-12-2-overo-image/ I'm not sure when I'm going to be able to hack on this again, but at least I have a documented starting point for next time. I also put links to the above posts on the openSUSE wiki at: http://en.opensuse.org/openSUSE:Supported_ARM_boards#Supported_platforms Special thanks to Alex for his help, and to everyone else for getting ARM support to a point where this was relatively straightforward for me to do :) Regards, Tim -- Tim Serong Senior Clustering Engineer SUSE tserong(a)suse.com -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

Re: [opensuse-arm] openSUSE 12.2 Beta/Warmup for Release Candidates
by Guillaume Gardet 25 Sep '12

25 Sep '12

Hi, Le 20/08/2012 12:04, Dirk Müller a écrit : > Hi, > > over the weekend we've built 12.2 images and smoke-tested them on one board > (Panda). The images are here: > > http://download.opensuse.org/repositories/openSUSE:/12.2:/ARM/images/ > > We plan to announce them later as Release Candiate 1. If you own a Pandaboard, > BeagleBoard or an EfikaMX, please give them a try. the Vexpress ones are iirc > also completely untested so far. Any feedback (positive or negative) is highly > welcome. I tried on a beagleboard xM the following image : openSUSE-12.2-ARM-beagle.armv7l-1.12.1-Build1.15.2.raw.xz (15th sept.) I write down my tests here : http://en.opensuse.org/openSUSE:Supported_ARM_boards#Beagleboard_xM We are missing the package /libdrm_omap1 /to get a working DVI output. Sound is not working. Cheers, Guillaume > Thanks! > Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 5

[opensuse-arm] Stragne problem when building and ARM image in my own project
by Joop Boonen 20 Sep '12

20 Sep '12

Hi all, When I try to build one of these images. home:worldcitizen:ARM JeOS-ac100 home:worldcitizen:armv7l JeOS-ac100 I get the following error: [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: netcfg-11.5-13.1.noarch requires aaa_base, but this requirement cannot be provided [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: xorg-x11-7.6_1-5.1.noarch requires xinit, but this requirement cannot be provided [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Solution 1: do not install module-init-tools-3.15-6.1.armv7hl [ 508s] Solution 2: break module-init-tools-3.15-6.1.armv7hl by ignoring some of its dependencies When I remove my own project from the kiwi file I don't see this problem any more, but then I'm missing some packages. I wonder what causes this problem. Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 2

[opensuse-arm] Strange problem when building and ARM image in my own project
by Joop Boonen 19 Sep '12

19 Sep '12

Hi all, When I try to build one of these images. home:worldcitizen:ARM JeOS-ac100 home:worldcitizen:armv7l JeOS-ac100 I get the following error: [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: netcfg-11.5-13.1.noarch requires aaa_base, but this requirement cannot be provided [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: xorg-x11-7.6_1-5.1.noarch requires xinit, but this requirement cannot be provided [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Solution 1: do not install module-init-tools-3.15-6.1.armv7hl [ 508s] Solution 2: break module-init-tools-3.15-6.1.armv7hl by ignoring some of its dependencies When I remove my own project from the kiwi file I don't see this problem any more, but then I'm missing some packages. I wonder what causes this problem. Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] images : rootfs vs JeOS
by Guillaume Gardet 19 Sep '12

19 Sep '12

Hi, in openSUSE:/Factory:/ARM/images/ there are 2 *.tbz files : openSUSE-Factory-ARM-rootfs.armv7l-1.12.1-Build19.2.tbz (67 MB) openSUSE-Factory-ARM-JeOS.armv7l-1.12.1-Build32.4.tbz (143 MB) What is the difference? Cheers, Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1