Mailinglist Archive: opensuse-amd64 (194 mails)

[Michael Schulz <michasch@xxxxxxxxxxxxxxx>]

Hi,

has someone not only installed SUSE 9,3 on a Tyan S4882 but also
succesfully booted after installation?

Tyan S4882 with 8GB RAM, 4 x Opteron 848 and a 3ware 9500-12 SATA 
Controller works fine during installation. After the first reboot
I got a Kernel Panic. Tyan Bios: 1.0.4b


CPU: L1 I Cache: 64k (64 bytes/line), D cache 64k (64 bytes/line)
CPU: L2 Cache: 1024k (64 bytes/line)
CPU 3(1) -> Node 3
AMD Opteron(tm) Processor 848 stepping 0a
Total of 4 processors activated (17580.03 BogoMIPS).
Using local APIC timer interrupts.
Detected 12.530 MHz APIC timer.
checking TSC synchronization accross 4 CPUs: passed.
time.c: Using HPET based timekeeping.
Brought up 4 CPUs
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Unable to handle kernel paging request at 0000000000002730: RIP
<ffffffff80120ed3>{iounmap+323}
PGD 0
Oops: 0000 [1] SMP
CPU 3
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.11.4-20a-smp
RIP: 0010:[<ffffffff80120ed3>] <ffffffff80120ed3>{iounmap+323}
RSP: 0018:ffff810182857be8  EFLAGS: 00010293
RAX: ffff8100fb100000 RBX: ffff810101ccebc0 RCX: 000000000000001a
RDX: ffffffff7fffffff RSI: 0000000000002000 RDI: 00000000fb100000
RBP: ffffc20000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffffffff80471028 R12: ffffffff803d8670
R13: ffff81007ff53a00 R14: ffff8101828f9800 R15: ffff81007ff53e00
FS:  0000000000000000 (0000) GS: ffffffff804e3400 (0000)
knlGS:0000000000000000
CS:  0010: DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000002730 CR3: 00000000f7e98000 CR4: 00000000000006e0
Process swapper (pid: 1, threadinfo ffff810182856000, task ffff81010000b750)
Stack: ffffffff803d8670 ffffc20000000000 00000000000001ea ffffffff8022dc77
       0000000000000000 0000000000000000 ffff81007ff53a00 ffffffff803d82a0
       ffff8101828f9800 ffffffff803d8670
Call Trace:<ffffffff8022dc77> {quirk_usb_early_handoff+871}
<ffffffff8022d008>{pci_fixup_device+136}
           <ffffffff8022b53c>{pci_scan_single_device+1084}
<ffffffff8022b59e>{pci_scan_slot+30}
           <ffffffff8022bc0f>{pci_scan_child_bus+31}
<ffffffff8022baa6>{pci_scan_bridge+390}


Here it stops. I can't see anymore output.
I can install and! use FedoraCore 3 with all 4 CPUs and 8GB RAM.
Thanks,

Michael