Mailinglist Archive: opensuse-amd64 (194 mails)
| < Previous | Next > |
Re: [suse-amd64] suse 9.3 - Tyan S4882 - Kernel Panic during boot
- From: "N. Eschricht" <eschricht@xxxxxx>
- Date: Wed, 13 Apr 2005 14:23:17 +0000 (UTC)
- Message-id: <425D2B42.2070206@xxxxxx>
Michael Schulz wrote:
> Hi,
>
> has someone not only installed SUSE 9,3 on a Tyan S4882 but also
> succesfully booted after installation?
>
> Tyan S4882 with 8GB RAM, 4 x Opteron 848 and a 3ware 9500-12 SATA
> Controller works fine during installation. After the first reboot
> I got a Kernel Panic. Tyan Bios: 1.0.4b
>
>
> CPU: L1 I Cache: 64k (64 bytes/line), D cache 64k (64 bytes/line)
> CPU: L2 Cache: 1024k (64 bytes/line)
> CPU 3(1) -> Node 3
> AMD Opteron(tm) Processor 848 stepping 0a
> .
> .
> .
> ACPI: Subsystem revision 20050211
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> Unable to handle kernel paging request at 0000000000002730: RIP
> <ffffffff80120ed3>{iounmap+323}
> PGD 0
> .
> .
> .
> Here it stops. I can't see anymore output.
> I can install and! use FedoraCore 3 with all 4 CPUs and 8GB RAM.
> Thanks,
>
> Michael
>
We have the same Tyan running with 32GB RAM without problems under Suse 9.1. We
don't even think about an update. Suse 9.2 should also work.
- Do you have any strange PCI-hardware on the PCI-slots or are they free? You
should remove any PCI-hardware.
- Did you tried some boot-options as 'iommu=noforce' etc. or simply the
Save-Settings boot option Suse always installs?
PS. The 'suse-linux' group shows up many people who have strange hardware (and some software) problems on 9.3. Its not always best to install the newest Suse Version. You should try 9.2 instead, 9.3 is maybe too new for such an exotic system as the Tyan 4882 is. Not many people have such a system and so bugs killing takes a bit longer.
Regards,
N. Eschricht
--
Dipl.-Ing. (BA) Nico Eschricht
----------------------------------
Hahn-Meitner-Institut Berlin GmbH
Abteilung DN - Zentrale DV-Systeme
Glienicker Strasse 100
14109 Berlin
----------------------------------
phone: +49-030-8062-2518
email: eschricht@xxxxxx
----------------------------------
> Hi,
>
> has someone not only installed SUSE 9,3 on a Tyan S4882 but also
> succesfully booted after installation?
>
> Tyan S4882 with 8GB RAM, 4 x Opteron 848 and a 3ware 9500-12 SATA
> Controller works fine during installation. After the first reboot
> I got a Kernel Panic. Tyan Bios: 1.0.4b
>
>
> CPU: L1 I Cache: 64k (64 bytes/line), D cache 64k (64 bytes/line)
> CPU: L2 Cache: 1024k (64 bytes/line)
> CPU 3(1) -> Node 3
> AMD Opteron(tm) Processor 848 stepping 0a
> .
> .
> .
> ACPI: Subsystem revision 20050211
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> Unable to handle kernel paging request at 0000000000002730: RIP
> <ffffffff80120ed3>{iounmap+323}
> PGD 0
> .
> .
> .
> Here it stops. I can't see anymore output.
> I can install and! use FedoraCore 3 with all 4 CPUs and 8GB RAM.
> Thanks,
>
> Michael
>
We have the same Tyan running with 32GB RAM without problems under Suse 9.1. We
don't even think about an update. Suse 9.2 should also work.
- Do you have any strange PCI-hardware on the PCI-slots or are they free? You
should remove any PCI-hardware.
- Did you tried some boot-options as 'iommu=noforce' etc. or simply the
Save-Settings boot option Suse always installs?
PS. The 'suse-linux' group shows up many people who have strange hardware (and some software) problems on 9.3. Its not always best to install the newest Suse Version. You should try 9.2 instead, 9.3 is maybe too new for such an exotic system as the Tyan 4882 is. Not many people have such a system and so bugs killing takes a bit longer.
Regards,
N. Eschricht
--
Dipl.-Ing. (BA) Nico Eschricht
----------------------------------
Hahn-Meitner-Institut Berlin GmbH
Abteilung DN - Zentrale DV-Systeme
Glienicker Strasse 100
14109 Berlin
----------------------------------
phone: +49-030-8062-2518
email: eschricht@xxxxxx
----------------------------------
| < Previous | Next > |