Mailinglist Archive: opensuse-amd64 (194 mails)
| < Previous | Next > |
SUSE 9.3 (x86_64) installation on Fujitsu Siemens CELSIUS V810
- From: Rainer Koenig <Rainer.Koenig@xxxxxxxxxxxxxxxxxxx>
- Date: Tue, 26 Apr 2005 12:03:55 +0000 (UTC)
- Message-id: <877jipiw2g.fsf@xxxxxxxxxxxxxxxxxxxx>
Hi there,
today I encountered a kernel panic during installation of SUSE 9.3 on
our V810 dual opteron workstation. This bug occured only when more than
4 GB of RAM were installed.
I found a workaround that does it on the latest BIOS (R1.07.1692):
The problem can be solved by changing BIOS settings under "Advanced/Chipset".
The setting for "Node Memory Interleave" has to change from the default
"Disabled" to "Auto" which will also cause the setting "ACPI SRAT table" to
switch from "enabled to disabled".
After this the system boots fine also with more than 4 GB RAM.
Best regards
Rainer König
--
Dipl.-Inf. (FH) Rainer Koenig
Project Manager Linux
Business Clients
Fujitsu Siemens Computers
VP BC E SW OS
Phone: +49-821-804-3321
Fax: +49-821-804-2131
today I encountered a kernel panic during installation of SUSE 9.3 on
our V810 dual opteron workstation. This bug occured only when more than
4 GB of RAM were installed.
I found a workaround that does it on the latest BIOS (R1.07.1692):
The problem can be solved by changing BIOS settings under "Advanced/Chipset".
The setting for "Node Memory Interleave" has to change from the default
"Disabled" to "Auto" which will also cause the setting "ACPI SRAT table" to
switch from "enabled to disabled".
After this the system boots fine also with more than 4 GB RAM.
Best regards
Rainer König
--
Dipl.-Inf. (FH) Rainer Koenig
Project Manager Linux
Business Clients
Fujitsu Siemens Computers
VP BC E SW OS
Phone: +49-821-804-3321
Fax: +49-821-804-2131
| < Previous | Next > |