Mailinglist Archive: opensuse-amd64 (194 mails)
| < Previous | Next > |
Re: [suse-amd64] SUSE 9.3 (x86_64) installation on Fujitsu Siemens CELSIUS V810
- From: Andreas Wahlert <andreas.wahlert@xxxxxx>
- Date: Tue, 26 Apr 2005 15:26:30 +0000 (UTC)
- Message-id: <426E58DA.70109@xxxxxx>
Hi@all,
thanx to FSC for providing this information.
best regards
Andreas Wahlert
-----------------------------------------------------------------------
Rainer Koenig wrote:
> Hi there,
>
> today I encountered a kernel panic during installation of SUSE 9.3 on
> our V810 dual opteron workstation. This bug occured only when more than
> 4 GB of RAM were installed.
> I found a workaround that does it on the latest BIOS (R1.07.1692):
> The problem can be solved by changing BIOS settings under "Advanced/Chipset". The setting for "Node Memory Interleave" has to change from the default
> "Disabled" to "Auto" which will also cause the setting "ACPI SRAT table" to
> switch from "enabled to disabled".
> After this the system boots fine also with more than 4 GB RAM.
>
> Best regards
> Rainer König
thanx to FSC for providing this information.
best regards
Andreas Wahlert
-----------------------------------------------------------------------
Rainer Koenig wrote:
> Hi there,
>
> today I encountered a kernel panic during installation of SUSE 9.3 on
> our V810 dual opteron workstation. This bug occured only when more than
> 4 GB of RAM were installed.
> I found a workaround that does it on the latest BIOS (R1.07.1692):
> The problem can be solved by changing BIOS settings under "Advanced/Chipset". The setting for "Node Memory Interleave" has to change from the default
> "Disabled" to "Auto" which will also cause the setting "ACPI SRAT table" to
> switch from "enabled to disabled".
> After this the system boots fine also with more than 4 GB RAM.
>
> Best regards
> Rainer König
| < Previous | Next > |