On Tue, Jul 09, Thomas Fehr wrote:

On Tue, Jul 09, Josef Reidinger wrote:

...

On Tue, 09 Jul 2013 16:47:46 +0200 Stephan Kulow wrote:

...

Hi,

I tested latest Factory DVD and yast segfaults during bootloader config ;( I would welcome if someone can have a look.

On related news: Steffen and me built a package that has all the debuginfos used in first stage initrd and make them available through "extend root-debuginfos" (when it's part of the install medium of course). Not sure if you actually need it, but I found it rather useful to have (in the NET repo).

Greetings, Stephan

Because I have suspicious that it can be caused by new core and ycp-ui-bindings, I look at it

Where I can get such DVD?

I am currently running an installation in VirtualBox and so far it is fine (but bootloader setup is not yet done).

I use (from Nürnberg NFS) /mounts/dist/install/openSUSE-UNTESTED/openSUSE-Factory-DVD-i586-Build0567-Media.iso

/mount/dist is dist.suse.de:/dist

The detection of ssh as install medium is broken (bnc#825160) but that should be unrelated. Wait for some more minutes and I will report if install succeeded or not.

Ok, as expected crashed during bootloaders setup. Probably interesting y2log lines are: 2013-07-09 11:33:11 <1> f232.suse.de(3135) [YCP] Bootloader.ycp:1007 sections after remapping: [] 2013-07-09 11:33:11 <1> f232.suse.de(3135) [YCP] Bootloader.ycp:605 Writing bootloader configuration during installation 2013-07-09 11:33:11 <1> f232.suse.de(3135) [YCP] bootloader/routines/lib_iface.ycp:76 Initializing lib for grub2 2013-07-09 11:33:11 <1> f232.suse.de(3135) [YCP] BootArch.ycp:193 Type of architecture: i386 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 Error: signal 11 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (1) /usr/lib/libzypp.so.1302 : +0x2fc99b [0xb3fc999b] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (2) linux-gate.so.1 : __kernel_sigreturn+0 [0xb772a400] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (3) /usr/lib/libycpvalues.so.6 : YCPElementRep::destroy() const+0x1e [0xb74fc87e] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (4) /usr/lib/libycpvalues.so.6 : YCPElement::operator=(YCPElement const&)+0x2b [0xb74fcb6b] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (5) /usr/lib/YaST2/plugin/libpy2wfm.so.2 : Y2StdioFunction::attachParameter(YCPValue const&, int)+0 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (6) /usr/lib/YaST2/plugin/libpy2wfm.so.2 : Y2SystemFunction::attachParameter(YCPValue const&, int)+ 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (7) /usr/lib/libycp.so.5 : YEFunction::evaluate(bool)+0x2ce [0xb761a10e] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (8) /usr/lib/libycp.so.5 : YSExpression::evaluate(bool)+0x34 [0xb76243b4] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (9) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (10) /usr/lib/libycp.so.5 : Y2YCPFunction::evaluateCall()+0x279 [0xb760caf9] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (11) /usr/lib/libycp.so.5 : YEFunction::evaluate(bool)+0x5e4 [0xb761a424] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (12) /usr/lib/libycp.so.5 : YSExpression::evaluate(bool)+0x34 [0xb76243b4] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (13) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (14) /usr/lib/libycp.so.5 : Y2YCPFunction::evaluateCall()+0x279 [0xb760caf9] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (15) /usr/lib/libycp.so.5 : YEFunctionPointer::evaluate(bool)+0x7bb [0xb760b51b] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (16) /usr/lib/libycp.so.5 : YSReturn::evaluate(bool)+0x4e [0xb7624fee] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (17) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (18) /usr/lib/libycp.so.5 : Y2YCPFunction::evaluateCall()+0x279 [0xb760caf9] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (19) /usr/lib/libycp.so.5 : YEFunction::evaluate(bool)+0x5e4 [0xb761a424] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (20) /usr/lib/libycp.so.5 : YSAssign::evaluate(bool)+0x3e [0xb762447e] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (21) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (22) /usr/lib/libycp.so.5 : YSBlock::evaluate(bool)+0x24 [0xb76241f4] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (23) /usr/lib/libycp.so.5 : YSIf::evaluate(bool)+0x233 [0xb762a533] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (24) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (25) /usr/lib/libycp.so.5 : Y2YCPFunction::evaluateCall()+0x279 [0xb760caf9] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (26) /usr/lib/libycp.so.5 : YEFunction::evaluate(bool)+0x5e4 [0xb761a424] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (27) /usr/lib/libycp.so.5 : YSAssign::evaluate(bool)+0x3e [0xb762447e] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (28) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (29) /usr/lib/libycp.so.5 : YSBlock::evaluate(bool)+0x24 [0xb76241f4] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (30) /usr/lib/libycp.so.5 : YSIf::evaluate(bool)+0x233 [0xb762a533] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (31) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (32) /usr/lib/libycp.so.5 : YSBlock::evaluate(bool)+0x24 [0xb76241f4] Complete y2log is at ~fehr/y2log_crash_bootloader Inst-sys is still running. If needed you could ssh into 10.120.66.232 password is "emil" Bye, Thomas Fehr -- Thomas Fehr, SuSE Linux Products GmbH, Maxfeldstr. 5, 90409 Nuernberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) Tel: +49-911-74053-0, Fax: +49-911-74053-482, Email: fehr@suse.de GPG public key available. -- To unsubscribe, e-mail: yast-devel+unsubscribe@opensuse.org To contact the owner, e-mail: yast-devel+owner@opensuse.org

On Tue, Jul 09, Josef Reidinger wrote:

On Tue, 9 Jul 2013 17:43:20 +0200 Thomas Fehr wrote:

...

On Tue, Jul 09, Thomas Fehr wrote:

...

On Tue, Jul 09, Josef Reidinger wrote:

...

On Tue, 09 Jul 2013 16:47:46 +0200 Stephan Kulow wrote:

...

Hi,

I tested latest Factory DVD and yast segfaults during bootloader config ;( I would welcome if someone can have a look.

On related news: Steffen and me built a package that has all the debuginfos used in first stage initrd and make them available through "extend root-debuginfos" (when it's part of the install medium of course). Not sure if you actually need it, but I found it rather useful to have (in the NET repo).

Greetings, Stephan

Because I have suspicious that it can be caused by new core and ycp-ui-bindings, I look at it

Where I can get such DVD?

I am currently running an installation in VirtualBox and so far it is fine (but bootloader setup is not yet done).

I use (from Nürnberg NFS) /mounts/dist/install/openSUSE-UNTESTED/openSUSE-Factory-DVD-i586-Build0567-Media.iso

/mount/dist is dist.suse.de:/dist

The detection of ssh as install medium is broken (bnc#825160) but that should be unrelated. Wait for some more minutes and I will report if install succeeded or not.

Ok, as expected crashed during bootloaders setup. Probably interesting y2log lines are:

2013-07-09 11:33:11 <1> f232.suse.de(3135) [YCP] Bootloader.ycp:1007 sections after remapping: [] 2013-07-09 11:33:11 <1> f232.suse.de(3135) [YCP] Bootloader.ycp:605 Writing bootloader configuration during installation 2013-07-09 11:33:11 <1> f232.suse.de(3135) [YCP] bootloader/routines/lib_iface.ycp:76 Initializing lib for grub2 2013-07-09 11:33:11 <1> f232.suse.de(3135) [YCP] BootArch.ycp:193 Type of architecture: i386 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 Error: signal 11 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (1) /usr/lib/libzypp.so.1302 : +0x2fc99b [0xb3fc999b] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (2) linux-gate.so.1 : __kernel_sigreturn+0 [0xb772a400] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (3) /usr/lib/libycpvalues.so.6 : YCPElementRep::destroy() const+0x1e [0xb74fc87e] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (4) /usr/lib/libycpvalues.so.6 : YCPElement::operator=(YCPElement const&)+0x2b [0xb74fcb6b] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (5) /usr/lib/YaST2/plugin/libpy2wfm.so.2 : Y2StdioFunction::attachParameter(YCPValue const&, int)+0 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (6) /usr/lib/YaST2/plugin/libpy2wfm.so.2 : Y2SystemFunction::attachParameter(YCPValue const&, int)+ 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (7) /usr/lib/libycp.so.5 : YEFunction::evaluate(bool)+0x2ce [0xb761a10e] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (8) /usr/lib/libycp.so.5 : YSExpression::evaluate(bool)+0x34 [0xb76243b4] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (9) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (10) /usr/lib/libycp.so.5 : Y2YCPFunction::evaluateCall()+0x279 [0xb760caf9] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (11) /usr/lib/libycp.so.5 : YEFunction::evaluate(bool)+0x5e4 [0xb761a424] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (12) /usr/lib/libycp.so.5 : YSExpression::evaluate(bool)+0x34 [0xb76243b4] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (13) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (14) /usr/lib/libycp.so.5 : Y2YCPFunction::evaluateCall()+0x279 [0xb760caf9] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (15) /usr/lib/libycp.so.5 : YEFunctionPointer::evaluate(bool)+0x7bb [0xb760b51b] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (16) /usr/lib/libycp.so.5 : YSReturn::evaluate(bool)+0x4e [0xb7624fee] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (17) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (18) /usr/lib/libycp.so.5 : Y2YCPFunction::evaluateCall()+0x279 [0xb760caf9] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (19) /usr/lib/libycp.so.5 : YEFunction::evaluate(bool)+0x5e4 [0xb761a424] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (20) /usr/lib/libycp.so.5 : YSAssign::evaluate(bool)+0x3e [0xb762447e] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (21) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (22) /usr/lib/libycp.so.5 : YSBlock::evaluate(bool)+0x24 [0xb76241f4] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (23) /usr/lib/libycp.so.5 : YSIf::evaluate(bool)+0x233 [0xb762a533] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (24) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (25) /usr/lib/libycp.so.5 : Y2YCPFunction::evaluateCall()+0x279 [0xb760caf9] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (26) /usr/lib/libycp.so.5 : YEFunction::evaluate(bool)+0x5e4 [0xb761a424] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (27) /usr/lib/libycp.so.5 : YSAssign::evaluate(bool)+0x3e [0xb762447e] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (28) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (29) /usr/lib/libycp.so.5 : YSBlock::evaluate(bool)+0x24 [0xb76241f4] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (30) /usr/lib/libycp.so.5 : YSIf::evaluate(bool)+0x233 [0xb762a533] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (31) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (32) /usr/lib/libycp.so.5 : YSBlock::evaluate(bool)+0x24 [0xb76241f4]

Complete y2log is at ~fehr/y2log_crash_bootloader

Inst-sys is still running. If needed you could ssh into 10.120.66.232 password is "emil"

Bye, Thomas Fehr

OK, so line which cause problem is https://github.com/yast/yast-core/blob/master/libycp/src/YCPElement.cc#L95

now I need to find why there is something in element when attaching parameters to remote call.

Maybe this is one of the rare cases where having yast2 running with Y2DEBUG set would give some additonal useful information... If it helps I can simply restart install with Y2DEBUG set. Sould I? Bye, Thomas Fehr -- Thomas Fehr, SuSE Linux Products GmbH, Maxfeldstr. 5, 90409 Nuernberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) Tel: +49-911-74053-0, Fax: +49-911-74053-482, Email: fehr@suse.de GPG public key available. -- To unsubscribe, e-mail: yast-devel+unsubscribe@opensuse.org To contact the owner, e-mail: yast-devel+owner@opensuse.org

On Tue, 9 Jul 2013 18:42:23 +0200 Josef Reidinger wrote:

On Tue, 9 Jul 2013 18:25:27 +0200 Thomas Fehr wrote:

...

On Tue, Jul 09, Josef Reidinger wrote:

...

On Tue, 9 Jul 2013 17:43:20 +0200 Thomas Fehr wrote:

...

On Tue, Jul 09, Thomas Fehr wrote:

...

On Tue, Jul 09, Josef Reidinger wrote:

...

On Tue, 09 Jul 2013 16:47:46 +0200 Stephan Kulow wrote:

> Hi, > > I tested latest Factory DVD and yast segfaults during > bootloader config ;( I would welcome if someone can have a > look. > > On related news: Steffen and me built a package that has > all the debuginfos used in first stage initrd and make > them available through "extend root-debuginfos" (when > it's part of the install medium of course). Not sure if > you actually need it, but I found it rather useful to > have (in the NET repo). > > Greetings, Stephan >

Because I have suspicious that it can be caused by new core and ycp-ui-bindings, I look at it

Where I can get such DVD?

I am currently running an installation in VirtualBox and so far it is fine (but bootloader setup is not yet done).

I use (from Nürnberg NFS) /mounts/dist/install/openSUSE-UNTESTED/openSUSE-Factory-DVD-i586-Build0567-Media.iso

/mount/dist is dist.suse.de:/dist

The detection of ssh as install medium is broken (bnc#825160) but that should be unrelated. Wait for some more minutes and I will report if install succeeded or not.

Ok, as expected crashed during bootloaders setup. Probably interesting y2log lines are:

2013-07-09 11:33:11 <1> f232.suse.de(3135) [YCP] Bootloader.ycp:1007 sections after remapping: [] 2013-07-09 11:33:11 <1> f232.suse.de(3135) [YCP] Bootloader.ycp:605 Writing bootloader configuration during installation 2013-07-09 11:33:11 <1> f232.suse.de(3135) [YCP] bootloader/routines/lib_iface.ycp:76 Initializing lib for grub2 2013-07-09 11:33:11 <1> f232.suse.de(3135) [YCP] BootArch.ycp:193 Type of architecture: i386 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 Error: signal 11 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (1) /usr/lib/libzypp.so.1302 : +0x2fc99b [0xb3fc999b] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (2) linux-gate.so.1 : __kernel_sigreturn+0 [0xb772a400] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (3) /usr/lib/libycpvalues.so.6 : YCPElementRep::destroy() const+0x1e [0xb74fc87e] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (4) /usr/lib/libycpvalues.so.6 : YCPElement::operator=(YCPElement const&)+0x2b [0xb74fcb6b] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (5) /usr/lib/YaST2/plugin/libpy2wfm.so.2 : Y2StdioFunction::attachParameter(YCPValue const&, int)+0 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (6) /usr/lib/YaST2/plugin/libpy2wfm.so.2 : Y2SystemFunction::attachParameter(YCPValue const&, int)+ 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (7) /usr/lib/libycp.so.5 : YEFunction::evaluate(bool)+0x2ce [0xb761a10e] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (8) /usr/lib/libycp.so.5 : YSExpression::evaluate(bool)+0x34 [0xb76243b4] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (9) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (10) /usr/lib/libycp.so.5 : Y2YCPFunction::evaluateCall()+0x279 [0xb760caf9] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (11) /usr/lib/libycp.so.5 : YEFunction::evaluate(bool)+0x5e4 [0xb761a424] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (12) /usr/lib/libycp.so.5 : YSExpression::evaluate(bool)+0x34 [0xb76243b4] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (13) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (14) /usr/lib/libycp.so.5 : Y2YCPFunction::evaluateCall()+0x279 [0xb760caf9] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (15) /usr/lib/libycp.so.5 : YEFunctionPointer::evaluate(bool)+0x7bb [0xb760b51b] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (16) /usr/lib/libycp.so.5 : YSReturn::evaluate(bool)+0x4e [0xb7624fee] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (17) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (18) /usr/lib/libycp.so.5 : Y2YCPFunction::evaluateCall()+0x279 [0xb760caf9] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (19) /usr/lib/libycp.so.5 : YEFunction::evaluate(bool)+0x5e4 [0xb761a424] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (20) /usr/lib/libycp.so.5 : YSAssign::evaluate(bool)+0x3e [0xb762447e] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (21) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (22) /usr/lib/libycp.so.5 : YSBlock::evaluate(bool)+0x24 [0xb76241f4] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (23) /usr/lib/libycp.so.5 : YSIf::evaluate(bool)+0x233 [0xb762a533] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (24) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (25) /usr/lib/libycp.so.5 : Y2YCPFunction::evaluateCall()+0x279 [0xb760caf9] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (26) /usr/lib/libycp.so.5 : YEFunction::evaluate(bool)+0x5e4 [0xb761a424] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (27) /usr/lib/libycp.so.5 : YSAssign::evaluate(bool)+0x3e [0xb762447e] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (28) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (29) /usr/lib/libycp.so.5 : YSBlock::evaluate(bool)+0x24 [0xb76241f4] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (30) /usr/lib/libycp.so.5 : YSIf::evaluate(bool)+0x233 [0xb762a533] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (31) /usr/lib/libycp.so.5 : YBlock::evaluate(bool)+0x1f0 [0xb7641420] 2013-07-09 11:33:11 <5> f232.suse.de(3135) [zypp] ZYppFactory.cc(sigsegvHandler):53 [bt]: (32) /usr/lib/libycp.so.5 : YSBlock::evaluate(bool)+0x24 [0xb76241f4]

Complete y2log is at ~fehr/y2log_crash_bootloader

Inst-sys is still running. If needed you could ssh into 10.120.66.232 password is "emil"

Bye, Thomas Fehr

OK, so line which cause problem is https://github.com/yast/yast-core/blob/master/libycp/src/YCPElement.cc#L95

now I need to find why there is something in element when attaching parameters to remote call.

Maybe this is one of the rare cases where having yast2 running with Y2DEBUG set would give some additonal useful information...

If it helps I can simply restart install with Y2DEBUG set. Sould I?

Bye, Thomas Fehr

It is not needed. I get root of issue. I am just testing fix and if it works well, I plan to submit it and create submit request to factory.

Josef

Should be fixed in sr#182680 ( I don't have here infrastructure to test it with DUD, but root of issue from backtrace looks clear ) Josef -- To unsubscribe, e-mail: yast-devel+unsubscribe@opensuse.org To contact the owner, e-mail: yast-devel+owner@opensuse.org

On Wed, 10 Jul 2013 12:03:00 +0200 Thomas Fehr wrote:

On Tue, Jul 09, Josef Reidinger wrote:

...

...

It is not needed. I get root of issue. I am just testing fix and if it works well, I plan to submit it and create submit request to factory.

Josef

Should be fixed in sr#182680 ( I don't have here infrastructure to test it with DUD, but root of issue from backtrace looks clear )

I just built yast2-core from git master, replaced /usr/lib/YaST2/plugin/libpy2wfm.so.2.0.0 in my install environemnt with updated one and the crash was indeed gone and my install succeded.

Good catch...

Tschuess, Thomas Fehr

Thanks for testing, I just working on non-deterministic testsuite fail, that I discuss with mvidner ( plan is to disable test until mvidner have time to look at it ). Lets hope that in factory it does build without this issue ( can be seen now in YaST:Head ) Josef -- To unsubscribe, e-mail: yast-devel+unsubscribe@opensuse.org To contact the owner, e-mail: yast-devel+owner@opensuse.org