On Thu, 11 Jul 2013 15:15:28 Marcus Meissner wrote:

On Thu, Jul 11, 2013 at 10:13:48PM +0930, Rodney Baker wrote:

...

On Thu, 11 Jul 2013 08:16:16 Damon Register wrote:

...

Earlier this week I installed fldigi on my PC that is running SuSE 12.3. It seems to work ok in the root account but when I try to run under a regular user account, a window opens briefly and then the program closes. I tried starting by typing fldigi in a terminal window to see if I could get any meaningful messages about the failure. I don't remember the exact message but it appears that it is a permission problem with the sound card.

Does anyone have experience with fldigi and how to get the correct sound card permission?

Damon Register

Damon,

Is your user a member of the Audio group?

This should be done via ACLs for the logged in users (via COnsoleKit/systemd-login and udev-acl)

That must be new. It sounds a lot more complex than ticknig a checkbox under "Users and Groups" in Yast, or even "usermod -Ga <username>". What is the "preferred" alternative method now?

Knowing the exact error message would be a start.

Ciao, Marcus

If you're running pulse-audio then it may be the 'pulse' and/or 'pulse-access' group membership that is necessary. -- ============================================================== Rodney Baker VK5ZTV rodney.baker@iinet.net.au ============================================================== -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org

On 07/12/2013 11:00 AM, Rodney Baker wrote:

...

...

Is your user a member of the Audio group? It is now

...

Knowing the exact error message would be a start. It is at the bottom of this message

If you're running pulse-audio then it may be the 'pulse' and/or 'pulse-access' group membership that is necessary. I set that too.

Damon Register ~> fldigi I: main: appname: fldigi I: main: Test file (nil) I: main: NBEMS.DIR not present I: main: HomeDir: /home/andrew/.fldigi/ I: main: RigsDir: /home/andrew/.fldigi/rigs/ I: main: ScriptsDir: /home/andrew/.fldigi/scripts/ I: main: PalettesDir: /home/andrew/.fldigi/palettes/ I: main: LogsDir: /home/andrew/.fldigi/logs/ I: main: PicsDir: /home/andrew/.fldigi/images/ I: main: HelpDir: /home/andrew/.fldigi/help/ I: main: MacrosDir: /home/andrew/.fldigi/macros/ I: main: WrapDir: /home/andrew/.fldigi/wrap/ I: main: TalkDir: /home/andrew/.fldigi/talk/ I: main: TempDir: /home/andrew/.fldigi/temp/ I: main: PskMailDir: /home/andrew/ I: main: NBEMS_dir: /home/andrew/.nbems/ I: main: ARQ_dir: /home/andrew/.nbems/ARQ/ I: main: ARQ_files_dir: /home/andrew/.nbems/ARQ/files/ I: main: ARQ_recv_dir: /home/andrew/.nbems/ARQ/recv/ I: main: ARQ_send: /home/andrew/.nbems/ARQ/send/ I: main: WRAP_dir: /home/andrew/.nbems/WRAP/ I: main: WRAP_recv_dir: /home/andrew/.nbems/WRAP/recv/ I: main: WRAP_send_dir: /home/andrew/.nbems/WRAP/send/ I: main: WRAP_auto_dir: /home/andrew/.nbems/WRAP/auto/ I: main: ICS_dir: /home/andrew/.nbems/ICS/ I: main: ICS_msg_dir: /home/andrew/.nbems/ICS/messages/ I: main: ICS_tmp_dir: /home/andrew/.nbems/ICS/templates/ I: main: FLMSG_dir: /home/andrew/.nbems/ I: main: FLMSG_dir_default: /home/andrew/.nbems/ I: main: FLMSG_WRAP_dir: /home/andrew/.nbems/WRAP/ I: main: FLMSG_WRAP_recv_dir: /home/andrew/.nbems/WRAP/recv/ I: main: FLMSG_WRAP_send_dir: /home/andrew/.nbems/WRAP/send/ I: main: FLMSG_WRAP_auto_dir: /home/andrew/.nbems/WRAP/auto/ I: main: FLMSG_ICS_dir: /home/andrew/.nbems/ICS/ I: main: FLMSG_ICS_msg_dir: /home/andrew/.nbems/ICS/messages/ I: main: FLMSG_ICS_tmp_dir: /home/andrew/.nbems/ICS/templates/ I: main: CPU speed factor=121.439421: setting slowcpu=false, sample_converter="Medium Sinc Interpolator" I: testCommPorts: Found serial port /dev/ttyS0 I: testCommPorts: Found serial port /dev/ttyS1 I: testCommPorts: Found serial port /dev/ttyS2 I: testCommPorts: Found serial port /dev/ttyS3 I: testCommPorts: Found serial port /dev/ttyS4 I: testCommPorts: Found serial port /dev/ttyS5 I: testCommPorts: Found serial port /dev/ttyS6 I: testCommPorts: Found serial port /dev/ttyS7 I: loadDefault: macro file name: /home/andrew/.fldigi/macros/macros.mdf I: loadDefault: loading: /home/andrew/.fldigi/macros/macros.mdf ALSA lib pcm_dsnoop.c:617:(snd_pcm_dsnoop_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm.c:2223:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2223:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2223:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave Cannot lock down 86577696 byte memory area (Cannot allocate memory) Caught signal 11 Aborting fldigi due to a fatal error. Please report this to: fldigi-devel@lists.berlios.de or file a bug report at: https://fedorahosted.org/fldigi/newticket ****** Stack trace: fldigi[0x531b12] fldigi[0x531cb3] /lib64/libpthread.so.0(+0xf1f0)[0x7f50c7aff1f0] fldigi[0x59f939] fldigi[0x5aca04] fldigi[0x56716c] /lib64/libpthread.so.0(+0x7e0f)[0x7f50c7af7e0f] /lib64/libc.so.6(clone+0x6d)[0x7f50c56e87dd] ****** Version information: fldigi 3.21.72 Copyright (C) 2007-2010 Dave Freese, Stelios Bounanos, Leigh Klotz, Remi Chateauneu, and others. License GPLv3+: GNU GPL version 3 or later http://www.gnu.org/licenses/gpl-3.0.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. ****** Build information: Build information: built : Fri May 17 21:12:20 UTC 2013 by abuild@build19 on x86_64-suse-linux-gnu for x86_64-suse-linux-gnu configure flags: '--host=x86_64-suse-linux-gnu' '--build=x86_64-suse-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/lib' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' 'build_alias=x86_64-suse-linux-gnu' 'host_alias=x86_64-suse-linux-gnu' 'CXXFLAGS=-fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' 'CFLAGS=-fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' compiler : gcc version 4.7.2 20130108 [gcc-4_7-branch revision 195012] (SUSE Linux) compiler flags : -I$(srcdir) -I$(srcdir)/include -I$(srcdir)/irrxml -I$(srcdir)/libtiniconv -I$(srcdir)/fileselector -I$(srcdir)/xmlrpcpp -pthread -I/usr/include/freetype2 -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_THREAD_SAFE -D_REENTRANT -D_REENTRANT -I/usr/include/libpng15 -pipe -Wall -fexceptions -O2 -ffast-math -finline-functions -DNDEBUG linker flags : -lportaudio -lasound -lm -lpthread -L/usr/lib64 -lfltk_images -lpng -lz -ljpeg -lfltk -lX11 -lsndfile -lsamplerate -lpulse-simple -lpulse -lhamlib -lm -lpng15 -ldl -lpthread libraries : FLTK 1.3.1 libsamplerate 0.1.8 libsndfile 1.0.25 PortAudio 19 PulseAudio 3.0 Hamlib 1.2.15.3 XMLRPC-C Builtin Runtime information: system : Linux andrew-ibm.registerfamily.org 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) x86_64 libraries : libsamplerate-0.1.8 (c) 2002-2008 Erik de Castro Lopo libsndfile-1.0.25-exp PortAudio V19-devel (built Apr 2 2012 11:03:56) 1899 Pulseaudio 3.0.0 Hamlib 1.2.15.3 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org