RE: Re: [SLE] Linux box behind SuSEFirewall2
Sean,
Not quite sure as I use the default cardmgr, but when I originally
set the NIC up, I made sure I choose pcmcia as the type of card, then
choose the equivalent driver and it automagically worked. Not got my
laptop fired up right now, so will have to get back to you on that.
But try re-installing pcmcia-NIC card from YaST2
Best,
Keith B.
"Theo. Sean Schulze"
Keith,
Thanks, that helped. Although I had been into that dialog box before to configure the card, I had not considered the nameserver part. I had the nameserver set to be dragoon. The trick was adding my ISP's nameservers as well. Once I added them, the external connection came right up.
Unfortunately, this seems to have only worked that one time. The changes were made while cardmgr had a temporary routing set up. So, when later I booted up again, with the network PCMCIA card inserted, my attempts to ping even internal machines are answered with a "network is unreachable" message. I went back in and reconfigured using yast2 without the card installed, but that doesn't seemed to have helped either. The network is still unreachable.
Obviously I have a number of questions, but I think chief among them is where does cardmgr get its network routing information to set up the network when the card is inserted? Does it have its own separate network configuration files?
Cheers, Sean
On Thursday 11 October 2001 02:58, kbb0927@cs.com wrote:
Sean,
On the laptop under YasT2->network basic-> LAN, set up the routing under the laptop's NIC so that dragoon is the gateway for it, and set up the nameserver's IP where it asks for nameserver, save, let SuSEconfig run and you should be in business. I use my laptop all the time this way.
HTH,
Keith B.
"Theo. Sean Schulze"
wrote: Hello,
I have a small home network which sits behind a linux box running SuSE 7.2Pro (update), kernel 2.4.6 and SuSEfirewall2. One of the machines behind the firewall is a laptop running SuSE 7.2Pro. I am trying to set it up so that the laptop can access the Internet over the network through the firewall. So, the firewall would be its gateway. My /etc/hosts looks like this:
127.0.0.1 localhost 192.168.0.1 hussar.nuthole.de hussar 192.168.0.2 graves.nuthole.de graves 192.168.0.3 dragoon.nuthole.de dragoon 192.168.0.4 lancer.nuthole.de lancer 192.168.0.5 pontifex.nuthole.de pontifex 192.168.0.6 scout.nuthole.de scout 192.168.0.99 dragoon.nuthole.de
Dragoon is the linux box running SuSEfirewall2. It connects to the Internet using ISDN and I4L. Graves, running Mac OS 9.1, can access the Internet over dragoon, as can scout, my daughter's Win98 box. So I know that masquerading/forwarding is working on my gateway/firewall. What do I need to do to the linux laptop pontifex to get it to access the Internet over dragoon?
I have tried configuration with yast and yast2. I set dragoon/192.168.0.3 up as the nameserver and as the gateway/PtP in the dialog boxes. What am I missing? Is there a file you need to see to figure this out?
-- Theo. Sean Schulze theo.schulze@myokay.net
"[T]he key to maintaining leadership in the economy and the technology that are about to emerge is likely to be the social position of knowledge professionals and social acceptance of their values." -- Peter Drucker
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com
participants (1)
-
kbb0927@cs.com