Re: [opensuse] can't burn dvd's with k3b
On Friday 08 Jan 2010 19:55:21 Bogdan Cristea wrote:
On Friday 08 January 2010 21:50:51 eddie wrote:
I'm not sure when this started to happen but I
cannot burn any dvd's. As
far as I can tell it is trying to use cdrecord (and
fails with a
"permission to open device" error message)
when it should be using
growisof. It seems as if the system cannot
distinguish between a CD and a
DVD.
Any advice or help would be grateful.
Thanks Eddie
I haven't seen this behavior on openSUSE 11.2 Have you tried to run k3b as root ?
Just tried (as root). Got the following result Writing DVD+R Using Wodim 1.1.0 - Copyright (C) 2006 Cdrkit suite contributors Starting writing at 16x speed Probably a buffer underrun occurred Please choose a lower burning speed. It still seems to be trying to use the CD stuff i.e. Wodim. (I using K3b Version 1.69.0, KDE 4.3.1, openSUSE 11.2 64bit) -- Delight thyself also in the Lord and He shall give thee the desires of thine heart. Psalm. 37:4 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Friday 08 January 2010 22:15:29 eddie wrote:
On Friday 08 Jan 2010 19:55:21 Bogdan Cristea wrote:
On Friday 08 January 2010 21:50:51 eddie wrote:
I'm not sure when this started to happen but I
cannot burn any dvd's. As
far as I can tell it is trying to use cdrecord (and
fails with a
"permission to open device" error message)
when it should be using
growisof. It seems as if the system cannot
distinguish between a CD and a
DVD.
Any advice or help would be grateful.
Thanks Eddie
I haven't seen this behavior on openSUSE 11.2 Have you tried to run k3b as root ?
Just tried (as root). Got the following result
Writing DVD+R Using Wodim 1.1.0 - Copyright (C) 2006 Cdrkit suite contributors Starting writing at 16x speed Probably a buffer underrun occurred Please choose a lower burning speed.
It still seems to be trying to use the CD stuff i.e. Wodim.
(I using K3b Version 1.69.0, KDE 4.3.1, openSUSE 11.2 64bit)
I have the same configuration. No problem when burning DVDs, but I remember of getting this warning of choosing a lower speed. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
fails with a
"permission to open device" error message)
Just tried (as root). Got the following result
Writing DVD+R Using Wodim 1.1.0 - Copyright (C) 2006 Cdrkit
suite contributors
Starting writing at 16x speed Probably a buffer underrun occurred Please choose a lower burning speed.
It still seems to be trying to use the CD stuff i.e.
Wodim.
(I using K3b Version 1.69.0, KDE 4.3.1,
openSUSE 11.2 64bit)
I have the same configuration. No problem when burning DVDs, but I remember of getting this warning of choosing a lower speed.
The message about speed I only got as a result of using root. I get a totally different message as normal user. I've burnt hundreds of DVD's before without any problems. This is a new system (less than 6 months old) but I believe I have burnt DVD's on this system before. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Friday, 2010-01-08 at 20:15 -0000, eddie wrote:
Just tried (as root). Got the following result
Writing DVD+R Using Wodim 1.1.0 - Copyright (C) 2006 Cdrkit suite contributors Starting writing at 16x speed Probably a buffer underrun occurred Please choose a lower burning speed.
It still seems to be trying to use the CD stuff i.e. Wodim.
No, wodim burns dvds just fine. Did you specify a burning speed? Leave it as "auto". If it was "auto", lower the speed.
(I using K3b Version 1.69.0, KDE 4.3.1, openSUSE 11.2 64bit)
That wodim is old; oS 11.2 has 1.1.9. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) iEYEARECAAYFAktHm0AACgkQtTMYHG2NR9U3ZACeMYlzyKPdqQr6EGx2EmTmdOe2 AHwAoImQOO51Xv4fz1N0BN+aUysKn2yh =BTwk -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Friday 08 Jan 2010 20:53:12 Carlos E. R. wrote:
On Friday, 2010-01-08 at 20:15 -0000, eddie wrote:
Just tried (as root). Got the following result
Writing DVD+R Using Wodim 1.1.0 - Copyright (C) 2006 Cdrkit suite contributors Starting writing at 16x speed Probably a buffer underrun occurred Please choose a lower burning speed.
It still seems to be trying to use the CD stuff i.e. Wodim.
No, wodim burns dvds just fine.
Did you specify a burning speed? Leave it as "auto". If it was "auto", lower the speed.
(I using K3b Version 1.69.0, KDE 4.3.1, openSUSE 11.2 64bit)
That wodim is old; oS 11.2 has 1.1.9.
Now i have this issue BUT it has only occured since 11.2 this silly Please choose a lower burning speed the drive is fine under 10.3 so what has been screwed up in 11.2 to make it want to reduce it even more when it Should be attempting to Speed things UP make no sense at all . Pete . -- Powered by openSUSE 11.2 Milestone 2 (x86_64) Kernel: 2.6.30-rc6-git3-4- default KDE: 4.2.86 (KDE 4.2.86 (KDE 4.3 >= 20090514)) "release 1" 08:36 up 8 days 20:02, 2 users, load average: 0.07, 0.06, 0.02
On Sat, 2010-01-09 at 08:39 +0000, Peter Nikolic wrote:
On Friday 08 Jan 2010 20:53:12 Carlos E. R. wrote:
On Friday, 2010-01-08 at 20:15 -0000, eddie wrote:
Just tried (as root). Got the following result
Writing DVD+R Using Wodim 1.1.0 - Copyright (C) 2006 Cdrkit suite contributors Starting writing at 16x speed Probably a buffer underrun occurred Please choose a lower burning speed.
It still seems to be trying to use the CD stuff i.e. Wodim.
No, wodim burns dvds just fine.
Did you specify a burning speed? Leave it as "auto". If it was "auto", lower the speed.
(I using K3b Version 1.69.0, KDE 4.3.1, openSUSE 11.2 64bit)
That wodim is old; oS 11.2 has 1.1.9.
Now i have this issue BUT it has only occured since 11.2 this silly Please choose a lower burning speed the drive is fine under 10.3 so what has been screwed up in 11.2 to make it want to reduce it even more when it Should be attempting to Speed things UP make no sense at all .
Pete .
Hi, its not just in 11.2, I can't burn dvd's with k3b in 11.1 either. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Saturday 09 Jan 2010 14:15:58 Mark Misulich wrote:
On Sat, 2010-01-09 at 08:39 +0000, Peter Nikolic wrote:
Now i have this issue BUT it has only occured since 11.2 this silly Please choose a lower burning speed the drive is fine under 10.3 so what has been screwed up in 11.2 to make it want to reduce it even more when it Should be attempting to Speed things UP make no sense at all .
Pete .
Hi, its not just in 11.2, I can't burn dvd's with k3b in 11.1 either.
Not tried 11.1 went from 10.3 to 11.2 with 11.0 on the laptop now 11.2 that has the same problem it is software for sure but after the rubbish on here late last year about wodim and the rest claims of pirated code ect i dont think we will get it solved for some time so i will keep an 10.3 install handy for serious CD/DVD burning Pete . -- Powered by openSUSE 11.2 Milestone 2 (x86_64) Kernel: 2.6.30-rc6-git3-4- default KDE: 4.2.86 (KDE 4.2.86 (KDE 4.3 >= 20090514)) "release 1" 14:28 up 9 days 1:54, 4 users, load average: 0.21, 0.47, 0.36
On 09/01/10 14:31, Peter Nikolic wrote:
Not tried 11.1 went from 10.3 to 11.2 with 11.0 on the laptop now 11.2 that has the same problem it is software for sure but after the rubbish on here late last year about wodim and the rest claims of pirated code ect i dont think we will get it solved for some time so i will keep an 10.3 install handy for serious CD/DVD burning
FWIW I am able to burn dvd's (data and iso) in k3b in 11.2 with the following package versions: k3b-codecs-1.69.0-40.pm.44.3.x86_64 k3b-1.69.0-40.pm.44.3.x86_64 k3b-lang-1.69.0-40.pm.44.3.noarch (from packman) cdrdao-1.2.2-311.3.x86_64 cdrkit-cdrtools-compat-1.1.9-3.2.x86_64 wodim-1.1.9-3.2.x86_64 genisoimage-1.1.9-3.2.x86_64 libiso9660-7-0.81-2.1.x86_64 dvd+rw-tools-7.1-36.2.x86_64 Regards, Tejas -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Saturday 09 Jan 2010 15:46:35 Tejas Guruswamy wrote:
On 09/01/10 14:31, Peter Nikolic wrote:
Not tried 11.1 went from 10.3 to 11.2 with 11.0 on the laptop now 11.2 that has the same problem it is software for sure but after the rubbish on here late last year about wodim and the rest claims of pirated code ect i dont think we will get it solved for some time so i will keep an 10.3 install handy for serious CD/DVD burning
FWIW I am able to burn dvd's (data and iso) in k3b in 11.2 with the following package versions:
k3b-codecs-1.69.0-40.pm.44.3.x86_64 k3b-1.69.0-40.pm.44.3.x86_64 k3b-lang-1.69.0-40.pm.44.3.noarch (from packman)
cdrdao-1.2.2-311.3.x86_64 cdrkit-cdrtools-compat-1.1.9-3.2.x86_64 wodim-1.1.9-3.2.x86_64 genisoimage-1.1.9-3.2.x86_64 libiso9660-7-0.81-2.1.x86_64 dvd+rw-tools-7.1-36.2.x86_64
Regards, Tejas
Hmmmm I just did an online update and there were new files from k3b and hey, I can now burn my disk images. Thanks for all those how contributed and, thanks to whoever finally sorted it out. Eddie -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Hi, its not just in 11.2, I can't burn dvd's with k3b in 11.1 either.
Not tried 11.1 went from 10.3 to 11.2 with 11.0 on the laptop now 11.2 that has the same problem it is software for sure but after the rubbish on here late last year about wodim and the rest claims of pirated code ect i dont think we will get it solved for some time so i will keep an 10.3 install
handy for serious CD/DVD burning
Pete .
Not related strictly to the topic but you can get Joerg Schilling's original cdrecord from opensuse factory repo. I think it works with 11.2. http://download.opensuse.org/repositories/Base:/System/openSUSE_Factory/ http://download.opensuse.org/repositories/Base:/System/openSUSE_Factory/i586... http://download.opensuse.org/repositories/Base:/System/openSUSE_Factory/x86_... Cheers, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (7)
-
Bogdan Cristea -
Carlos E. R. -
eddie -
Istvan Gabor -
Mark Misulich -
Peter Nikolic -
Tejas Guruswamy