Regards, I've installed SuSE linux but am unable to make the network card work am not sure which card is it as it show from /proc/pci its an intel one and not included in the list while installing any idea how to get this working? or i just need to get the latest kernel and re-compile? ==================================== QualityNet - Kuwait Bashar A. AlAbdulhadi I.S. Department UNIX Systems Administrator TEL: 808888 Ext. 637 FAX: 965-213790 www.qualitynet.net ====================================
At 03:43 AM 11/15/01, you wrote:
I've installed SuSE linux but am unable to make the network card work am not sure which card is it as it show from /proc/pci its an intel one and not
Try `lspci -v > pci_listing.text' and post it here. -- -=|JP|=- '01 B15 SE/PP | http://www.xanga.com/cowboydren/ | < '95 SL2 Auto | cowboydren @ yahoo . com | _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
----- Original Message -----
From: "Bashar"
Regards, I've installed SuSE linux but am unable to make the network card work am not sure which card is it as it show from /proc/pci its an intel one and not included in the list while installing any idea how to get this working? or i just need to get the latest kernel and re-compile?
==================================== QualityNet - Kuwait Bashar A. AlAbdulhadi I.S. Department UNIX Systems Administrator TEL: 808888 Ext. 637 FAX: 965-213790 www.qualitynet.net ====================================
A little more info is always helpful for getting a meaningful answer. What card is it? Check and see if it's ne2000 compatible or if any other existing driver will work. John
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03) Flags: bus master, medium devsel, latency 32 Memory at e4000000 (32-bit, prefetchable) Capabilities: [a0] AGP version 1.0 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) Flags: bus master, 66Mhz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: f7f00000-f7ffffff Prefetchable memory behind bridge: e8000000-f7cfffff 00:02.0 Ethernet controller: Intel Corporation 82557 (rev 05) Subsystem: Unknown device 1014:00d7 Flags: medium devsel, IRQ 15 Memory at e3fe7000 (32-bit, prefetchable) I/O ports at 70e0 Memory at f7e00000 (32-bit, non-prefetchable) Capabilities: [dc] Power Management version 1 00:03.0 SCSI storage controller: Adaptec AIC-7895 (rev 04) Subsystem: Unknown device 9004:7895 Flags: bus master, medium devsel, latency 64, IRQ 14 I/O ports at 7400 Memory at f7dfe000 (32-bit, non-prefetchable) Capabilities: [dc] Power Management version 1 00:03.1 SCSI storage controller: Adaptec AIC-7895 (rev 04) Subsystem: Unknown device 9004:7895 Flags: bus master, medium devsel, latency 64, IRQ 14 I/O ports at 7800 Memory at f7dff000 (32-bit, non-prefetchable) Capabilities: [dc] Power Management version 1 00:04.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) Flags: bus master, medium devsel, latency 0 00:04.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80) Flags: medium devsel I/O ports at fff0 [disabled] 00:04.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) Flags: bus master, medium devsel, latency 48, IRQ 14 I/O ports at ff00 00:04.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) Flags: medium devsel 00:0e.0 Communication controller: US Robotics: Unknown device 1006 Subsystem: Unknown device 12b9:0081 Flags: fast Back2Back, medium devsel, IRQ 15 Memory at e3fe6fc0 (32-bit, prefetchable) Memory at e3ff0000 (32-bit, prefetchable) Memory at e3fe8000 (32-bit, prefetchable) Capabilities: [40] Power Management version 2 01:00.0 VGA compatible controller: S3 Inc.: Unknown device 8a22 (rev 02) Subsystem: Unknown device 105d:0018 Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 9 Memory at f7f80000 (32-bit, non-prefetchable) Memory at e8000000 (32-bit, prefetchable) Capabilities: [dc] Power Management version 1 Capabilities: [80] AGP version 2.0 ==================================== QualityNet - Kuwait Bashar A. AlAbdulhadi I.S. Department UNIX Systems Administrator TEL: 808888 Ext. 637 FAX: 965-213790 www.qualitynet.net ==================================== -----Original Message----- From: Jon Pennington [mailto:cowboydren@yahoo.com] Sent: Thursday, November 15, 2001 1:10 PM To: suse-linux-e@suse.com Subject: Re: [SLE] ethernet driver At 03:43 AM 11/15/01, you wrote:
I've installed SuSE linux but am unable to make the network card work am not sure which card is it as it show from /proc/pci its an intel one and
not Try `lspci -v > pci_listing.text' and post it here. -- -=|JP|=- '01 B15 SE/PP | http://www.xanga.com/cowboydren/ | < '95 SL2 Auto | cowboydren @ yahoo . com | _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com
At 01:34 AM 11/19/01, you wrote:
00:02.0 Ethernet controller: Intel Corporation 82557 (rev 05) Subsystem: Unknown device 1014:00d7 Flags: medium devsel, IRQ 15 Memory at e3fe7000 (32-bit, prefetchable) I/O ports at 70e0 Memory at f7e00000 (32-bit, non-prefetchable) Capabilities: [dc] Power Management version 1
At 03:43 AM 11/15/01, you also wrote:
I've installed SuSE linux but am unable to make the network card work am not sure which card is it as it show from /proc/pci its an intel one and not
Try; `modprobe eepro100' then `dhcpcd' -- -=|JP|=- '01 B15 SE/PP | http://www.xanga.com/cowboydren/ | <))>< '95 SL2 Auto | cowboydren @ yahoo . com | _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
Great, it worked Thanks, What about the VGA card i tried it also but it didnt work, does that output has the VGA card information S3 unknown , if its possible to let it work in the same idea please let me know. ==================================== QualityNet - Kuwait Bashar A. AlAbdulhadi I.S. Department UNIX Systems Administrator TEL: 808888 Ext. 637 FAX: 965-213790 www.qualitynet.net ==================================== -----Original Message----- From: Jon Pennington [mailto:cowboydren@yahoo.com] Sent: Monday, November 19, 2001 11:56 AM To: suse-linux-e@suse.com Subject: RE: [SLE] ethernet driver At 01:34 AM 11/19/01, you wrote:
00:02.0 Ethernet controller: Intel Corporation 82557 (rev 05) Subsystem: Unknown device 1014:00d7 Flags: medium devsel, IRQ 15 Memory at e3fe7000 (32-bit, prefetchable) I/O ports at 70e0 Memory at f7e00000 (32-bit, non-prefetchable) Capabilities: [dc] Power Management version 1
At 03:43 AM 11/15/01, you also wrote:
I've installed SuSE linux but am unable to make the network card work am not sure which card is it as it show from /proc/pci its an intel one and not
Try; `modprobe eepro100' then `dhcpcd' -- -=|JP|=- '01 B15 SE/PP | http://www.xanga.com/cowboydren/ | <))>< '95 SL2 Auto | cowboydren @ yahoo . com | _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com
At 03:04 AM 11/19/01, you wrote:
Great, it worked Thanks,
For the record, to configure it with YaST2, the manufacturer is indeed Intel, and the model name is something like "EtherExpress Pro 10/100."
What about the VGA card i tried it also but it didnt work, does that output has the VGA card information S3 unknown
I'm not sure about that, Bashir. Since it's 66MHz, it looks to be an AGP card; possibly a Savage4? If SaX2 doesn't work to configure X, try logging in as root, stopping whatever X configuration is running, and do this: # XFree86 -configure This should create a file, XF86Config.new, in root's home directory. Copy this file to /etc/X11/XF86Config-4, and see if it works. If it works, great! You have a starting point, and should start tuning /etc/X11/XF86Config-4 to taste. There's lots of information out there about tuning a running configuration, so hit Google or something. ;) Feel free to share with us the working configuration, and what you want it to do. Save that to a floppy disk or something for future reference, but the .new file and the -4 file; this way if you ever have to reinstall, you don't have to have this headache twice. :) -- -=|JP|=- '01 B15 SE/PP | http://www.xanga.com/cowboydren/ | <))>< '95 SL2 Auto | cowboydren @ yahoo . com | _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
I believe its Savage4 or something, but i do not find it in the list , do i need to download the latest version of XFree86? if its , any SuSE package i can download with latest drivers? ==================================== QualityNet - Kuwait Bashar A. AlAbdulhadi I.S. Department UNIX Systems Administrator TEL: 808888 Ext. 637 FAX: 965-2413790 www.qualitynet.net ==================================== -----Original Message----- From: Jon Pennington [mailto:cowboydren@yahoo.com] Sent: Monday, November 19, 2001 1:09 PM To: suse-linux-e@suse.com Subject: RE: [SLE] ethernet driver At 03:04 AM 11/19/01, you wrote:
Great, it worked Thanks,
For the record, to configure it with YaST2, the manufacturer is indeed Intel, and the model name is something like "EtherExpress Pro 10/100."
What about the VGA card i tried it also but it didnt work, does that output has the VGA card information S3 unknown
I'm not sure about that, Bashir. Since it's 66MHz, it looks to be an AGP card; possibly a Savage4? If SaX2 doesn't work to configure X, try logging in as root, stopping whatever X configuration is running, and do this: # XFree86 -configure This should create a file, XF86Config.new, in root's home directory. Copy this file to /etc/X11/XF86Config-4, and see if it works. If it works, great! You have a starting point, and should start tuning /etc/X11/XF86Config-4 to taste. There's lots of information out there about tuning a running configuration, so hit Google or something. ;) Feel free to share with us the working configuration, and what you want it to do. Save that to a floppy disk or something for future reference, but the .new file and the -4 file; this way if you ever have to reinstall, you don't have to have this headache twice. :) -- -=|JP|=- '01 B15 SE/PP | http://www.xanga.com/cowboydren/ | <))>< '95 SL2 Auto | cowboydren @ yahoo . com | _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com
i configured it with S3 Savage3D , when i saved and startx it gave me: Fatal server error: No valid modes found. any idea what does this mean? ==================================== QualityNet - Kuwait Bashar A. AlAbdulhadi I.S. Department UNIX Systems Administrator TEL: 808888 Ext. 637 FAX: 965-2413790 www.qualitynet.net ==================================== -----Original Message----- From: Jon Pennington [mailto:cowboydren@yahoo.com] Sent: Monday, November 19, 2001 1:09 PM To: suse-linux-e@suse.com Subject: RE: [SLE] ethernet driver At 03:04 AM 11/19/01, you wrote:
Great, it worked Thanks,
For the record, to configure it with YaST2, the manufacturer is indeed Intel, and the model name is something like "EtherExpress Pro 10/100."
What about the VGA card i tried it also but it didnt work, does that output has the VGA card information S3 unknown
I'm not sure about that, Bashir. Since it's 66MHz, it looks to be an AGP card; possibly a Savage4? If SaX2 doesn't work to configure X, try logging in as root, stopping whatever X configuration is running, and do this: # XFree86 -configure This should create a file, XF86Config.new, in root's home directory. Copy this file to /etc/X11/XF86Config-4, and see if it works. If it works, great! You have a starting point, and should start tuning /etc/X11/XF86Config-4 to taste. There's lots of information out there about tuning a running configuration, so hit Google or something. ;) Feel free to share with us the working configuration, and what you want it to do. Save that to a floppy disk or something for future reference, but the .new file and the -4 file; this way if you ever have to reinstall, you don't have to have this headache twice. :) -- -=|JP|=- '01 B15 SE/PP | http://www.xanga.com/cowboydren/ | <))>< '95 SL2 Auto | cowboydren @ yahoo . com | _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com
participants (3)
-
Bashar -
John Scott -
Jon Pennington