[opensuse] Remove setup in HPLIP
Hi. On my opensuse 11.1 with KDE4, I have a setting made with the HPLIP. I have tried to delete this setting, and to set it up again. The problem I have is, that I have a HP JetDirect Printerserver. It has port number for port 1 set to 9100 and for port2 to 9101 I have wrongly set the printer for port 2 to 2 instead of 9101. Every time I try to install the printer again, it shows the wrong set up with port set to 2. How do I delete that ?. Erik -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
* Erik Jakobsen
On my opensuse 11.1 with KDE4, I have a setting made with the HPLIP.
I have tried to delete this setting, and to set it up again.
The problem I have is, that I have a HP JetDirect Printerserver.
It has port number for port 1 set to 9100 and for port2 to 9101
I have wrongly set the printer for port 2 to 2 instead of 9101.
Every time I try to install the printer again, it shows the wrong set up with port set to 2.
How do I delete that ?.
edit /etc/hp/hplip.conf -- Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://counter.li.org -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Patrick Shanahan wrote:
edit /etc/hp/hplip.conf
I seem not to be able to see what to edit here: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=2.8.7 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/cups/model/manufacturer-PPDs/hplip ppdbase=/usr/share/cups/model/manufacturer-PPDs doc=/usr/share/doc/packages/hplip icon=/usr/share/applications cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/lib/cups/driver # Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no foomatic-drv-install=no foomatic-ppd-install=yes foomatic-rip-hplip-install=yes internal-tag=2.8.7.3 restricted-build=no What to do ? Erik -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
* Erik Jakobsen
Patrick Shanahan wrote:
edit /etc/hp/hplip.conf
I seem not to be able to see what to edit here:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip] version=2.8.7
[dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/cups/model/manufacturer-PPDs/hplip ppdbase=/usr/share/cups/model/manufacturer-PPDs doc=/usr/share/doc/packages/hplip icon=/usr/share/applications cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/lib/cups/driver
# Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no foomatic-drv-install=no foomatic-ppd-install=yes foomatic-rip-hplip-install=yes internal-tag=2.8.7.3 restricted-build=no
What to do ?
Appears you have come difficulty. My /etc/hp/hplip.conf: # hplip.conf [hpiod] # port=0 (dynamic IP port) port=2208 [hpssd] # port=0 (dynamic IP port) port=2207 [hplip] version=1.7.1 jdprobe=0 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/cups/model/manufacturer-PPDs/hplip doc=/usr/share/doc/packages/hplip # Following values are determined at configure time and cannot be changed. [configure] network-build=1 pp-build=1 gui-build=1 scanner-build=1 fax-build=1 installinitd=/usr/lib/lsb/install_initd chkconfig=/sbin/chkconfig internal-tag=1.7.1.5 You *might* try plugging the correct values in by hand. -- Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://counter.li.org -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Patrick Shanahan wrote:
Appears you have come difficulty. My /etc/hp/hplip.conf:
# hplip.conf
[hpiod] # port=0 (dynamic IP port) port=2208 [hpssd] # port=0 (dynamic IP port) port=2207
[hplip] version=1.7.1 jdprobe=0
[dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/cups/model/manufacturer-PPDs/hplip doc=/usr/share/doc/packages/hplip
# Following values are determined at configure time and cannot be changed. [configure] network-build=1 pp-build=1 gui-build=1 scanner-build=1 fax-build=1 installinitd=/usr/lib/lsb/install_initd chkconfig=/sbin/chkconfig internal-tag=1.7.1.5
You *might* try plugging the correct values in by hand.
I see, but what happens if I delete the file and start over again ? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (2)
-
Erik Jakobsen
-
Patrick Shanahan