[opensuse] sensors output
Hello SuSE people, I installed Sensors the other day and below is the output of the command, Got all kinds of alarms. Checked it against the readings in my bios and seems to be close. Checked man sensors also. Not much help. How can I fix this? bob@EasyStreet:~> sensors w83627thf-isa-0290 Adapter: ISA adapter VCore: +1.54 V (min = +0.70 V, max = +1.87 V) +12V: +12.28 V (min = +0.00 V, max = +5.17 V) ALARM +3.3V: +0.45 V (min = +1.15 V, max = +0.29 V) ALARM +5V: +5.09 V (min = +5.12 V, max = +2.03 V) ALARM -12V: +0.72 V (min = -2.90 V, max = -14.91 V) ALARM V5SB: +5.16 V (min = +1.80 V, max = +2.18 V) ALARM VBat: +3.62 V (min = +0.29 V, max = +0.14 V) ALARM fan1: 3199 RPM (min = 27000 RPM, div = 2) ALARM CPU Fan: 4891 RPM (min = -1 RPM, div = 2) ALARM fan3: 0 RPM (min = -1 RPM, div = 2) ALARM M/B Temp: +44°C (high = +70°C, hyst = +0°C) sensor = thermistor CPU Temp: +31.5°C (high = +80°C, hyst = +75°C) sensor = diode temp3: -48.0°C (high = +80°C, hyst = +75°C) sensor = thermistor alarms: beep_enable: Sound alarm enabled Bob S -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Thu, 2007-04-05 at 22:03 -0400, Bob S wrote:
Hello SuSE people,
I installed Sensors the other day and below is the output of the command, Got all kinds of alarms. Checked it against the readings in my bios and seems to be close. Checked man sensors also. Not much help. How can I fix this?
bob@EasyStreet:~> sensors w83627thf-isa-0290 Adapter: ISA adapter VCore: +1.54 V (min = +0.70 V, max = +1.87 V) +12V: +12.28 V (min = +0.00 V, max = +5.17 V) ALARM +3.3V: +0.45 V (min = +1.15 V, max = +0.29 V) ALARM +5V: +5.09 V (min = +5.12 V, max = +2.03 V) ALARM -12V: +0.72 V (min = -2.90 V, max = -14.91 V) ALARM V5SB: +5.16 V (min = +1.80 V, max = +2.18 V) ALARM VBat: +3.62 V (min = +0.29 V, max = +0.14 V) ALARM fan1: 3199 RPM (min = 27000 RPM, div = 2) ALARM CPU Fan: 4891 RPM (min = -1 RPM, div = 2) ALARM fan3: 0 RPM (min = -1 RPM, div = 2) ALARM M/B Temp: +44°C (high = +70°C, hyst = +0°C) sensor = thermistor CPU Temp: +31.5°C (high = +80°C, hyst = +75°C) sensor = diode temp3: -48.0°C (high = +80°C, hyst = +75°C) sensor = thermistor alarms: beep_enable: Sound alarm enabled
Some of the limits are not set correctly as you can see with the +12V reading. It shows a correct reading of +12.28 but the upper limit is set to +5.17 volts. Rather hard to have that low a limit on a +12 volt source. There is a way to adjust the limits but I don't remember how, perhaps someone else on the list could help. -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
* Kenneth Schneider
Some of the limits are not set correctly as you can see with the +12V reading. It shows a correct reading of +12.28 but the upper limit is set to +5.17 volts. Rather hard to have that low a limit on a +12 volt source. There is a way to adjust the limits but I don't remember how, perhaps someone else on the list could help.
/etc/sensors.conf -- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/gallery2 OpenSUSE Linux http://en.opensuse.org/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (3)
-
Bob S
-
Kenneth Schneider
-
Patrick Shanahan