[opensuse] How to edit entries in the "Run Command" menu.
Using 12.1 version of OpenSUSE. Right mouse button allows selecting the "Run Command" (ALT-F2 also selects this command). Can someone tell me where the command entries are stored? I have several entries which need to be deleted. Thanks, Terry -- OpenSuSE 12.1 --- Kernel 3.1.9-1.4-desktop --- 08:35PM --- Thu 02/28/13 There are 10 types of people, those who know binary and those who don't -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 01/03/13 13:42, Terry Eck wrote:
Using 12.1 version of OpenSUSE. Right mouse button allows selecting the "Run Command" (ALT-F2 also selects this command). Can someone tell me where the command entries are stored? I have several entries which need to be deleted. Thanks, Terry
If I think that what you are asking is what I think you are asking :-) , then go Gecko>Edit Applications and find the apps which you want to amend and use Edit on the entry. BC -- Using openSUSE 12.2 x86_64 KDE 4.10.00 & kernel 3.8.0-2 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU Edit P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Terry Eck said the following on 02/28/2013 09:42 PM:
Using 12.1 version of OpenSUSE. Right mouse button allows selecting the "Run Command" (ALT-F2 also selects this command). Can someone tell me where the command entries are stored? I have several entries which need to be deleted.
I stuffed a few easily recognizable bogus commands as patterns in there and then run a recursive grep and found that they were in ~/.kde4/share/config/krunnerrc -- "I mean, if 10 years from now, when you are doing something quick and dirty, you suddenly visualize that I am looking over your shoulders and say to yourself, 'Dijkstra would not have liked this,' well that would be enough immortality for me." -- E.W. Dijkstra -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 01/03/13 16:03, Anton Aylward wrote:
Terry Eck said the following on 02/28/2013 09:42 PM:
Using 12.1 version of OpenSUSE. Right mouse button allows selecting the "Run Command" (ALT-F2 also selects this command). Can someone tell me where the command entries are stored? I have several entries which need to be deleted. I stuffed a few easily recognizable bogus commands as patterns in there and then run a recursive grep and found that they were in
~/.kde4/share/config/krunnerrc
Ce`? Have you actually looked inside this krunnerrc file? BC -- Using openSUSE 12.2 x86_64 KDE 4.10.00 & kernel 3.8.0-2 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Basil Chupin said the following on 03/01/2013 12:13 AM:
On 01/03/13 16:03, Anton Aylward wrote:
Terry Eck said the following on 02/28/2013 09:42 PM:
Using 12.1 version of OpenSUSE. Right mouse button allows selecting the "Run Command" (ALT-F2 also selects this command). Can someone tell me where the command entries are stored? I have several entries which need to be deleted. I stuffed a few easily recognizable bogus commands as patterns in there and then run a recursive grep and found that they were in
~/.kde4/share/config/krunnerrc
Ce`?
Have you actually looked inside this krunnerrc file?
Yes, and in there I saw [EdgePositions] Offset=0.5 Screen0=302,0 [General] PastQueries=,#ls,SillYpaTTerN001,LookForMe [Interface] Size=420,500 That is, the "easily recognizable bogus commands" -- Many of life's failures are people who did not realize how close they were to success when they gave up. Thomas A. Edison -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Basil Chupin wrote:
On 01/03/13 13:42, Terry Eck wrote:
Using 12.1 version of OpenSUSE. Right mouse button allows selecting the "Run Command" (ALT-F2 also selects this command). Can someone tell me where the command entries are stored? I have several entries which need to be deleted. Thanks, Terry
If I think that what you are asking is what I think you are asking :-) , then go Gecko>Edit Applications and find the apps which you want to amend and use Edit on the entry.
That would be Krunner and I haven't found a way to configure it. I have been looking for a way because of a problem I mentioned here about running man pages with it. In KDE 3, there was a way to configure this, but I haven't found similar in KDE 4. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 01/03/13 23:35, Anton Aylward wrote:
Basil Chupin said the following on 03/01/2013 12:13 AM:
On 01/03/13 16:03, Anton Aylward wrote:
Terry Eck said the following on 02/28/2013 09:42 PM:
Using 12.1 version of OpenSUSE. Right mouse button allows selecting the "Run Command" (ALT-F2 also selects this command). Can someone tell me where the command entries are stored? I have several entries which need to be deleted. I stuffed a few easily recognizable bogus commands as patterns in there and then run a recursive grep and found that they were in
~/.kde4/share/config/krunnerrc Ce`?
Have you actually looked inside this krunnerrc file? Yes, and in there I saw
[EdgePositions] Offset=0.5 Screen0=302,0
[General] PastQueries=,#ls,SillYpaTTerN001,LookForMe
[Interface] Size=420,500
That is, the "easily recognizable bogus commands"
But did you see any commands for Kmail or Firefox or LibreOffice or any other applications/packages? BC -- Using openSUSE 12.2 x86_64 KDE 4.10.00 & kernel 3.8.0-2 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 02/03/13 00:07, James Knott wrote:
Basil Chupin wrote:
On 01/03/13 13:42, Terry Eck wrote:
Using 12.1 version of OpenSUSE. Right mouse button allows selecting the "Run Command" (ALT-F2 also selects this command). Can someone tell me where the command entries are stored? I have several entries which need to be deleted. Thanks, Terry
If I think that what you are asking is what I think you are asking :-) , then go Gecko>Edit Applications and find the apps which you want to amend and use Edit on the entry.
That would be Krunner and I haven't found a way to configure it. I have been looking for a way because of a problem I mentioned here about running man pages with it. In KDE 3, there was a way to configure this, but I haven't found similar in KDE 4.
DARN! My oversight! :-( You need to RIGHT-click on Gecko to see the Edit Applications entry - which will bring up a menu of all the apps you have installed, and you can then edit the commands. Apologies for the confusion caused. BC -- Using openSUSE 12.2 x86_64 KDE 4.10.00 & kernel 3.8.0-2 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Anton Aylward wrote:
Have you actually looked inside this krunnerrc file? Yes, and in there I saw
[EdgePositions] Offset=0.5 Screen0=302,0
[General] PastQueries=,#ls,SillYpaTTerN001,LookForMe
[Interface] Size=420,500
That is, the "easily recognizable bogus commands"
Now please explain how you can change the behavior. For example, how can I get back the function of reading man pages? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Basil Chupin wrote:
That would be Krunner and I haven't found a way to configure it. I have been looking for a way because of a problem I mentioned here about running man pages with it. In KDE 3, there was a way to configure this, but I haven't found similar in KDE 4.
DARN! My oversight! :-(
You need to RIGHT-click on Gecko to see the Edit Applications entry - which will bring up a menu of all the apps you have installed, and you can then edit the commands.
Apologies for the confusion caused.
Now, try and find Krunner. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Basil Chupin said the following on 03/01/2013 08:19 AM:
That is, the "easily recognizable bogus commands"
But did you see any commands for Kmail or Firefox or LibreOffice or any other applications/packages?
No, because I don't normally use that mechanism. So they won't be there. Terry only asked where it was so he could delete them. I edited the file and they weren't in the pull-down any more. Are you talking about something else like the Kickoff menu? -- To stay young requires the unceasing cultivation of the ability to unlearn old falsehoods. -- Lazarus Long -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
James Knott said the following on 03/01/2013 08:29 AM:
That is, the "easily recognizable bogus commands" Now please explain how you can change the behavior. For example, how can I get back the function of reading man pages?
No. I answered Terry's question about editing his list of past commands. I don't use this "F2" mechanisms so its outside my patterns of experience. -- Superstitions typically involve seeing order where in fact there is none, and denial amounts to rejecting evidence of regularities, sometimes even ones that are staring us in the face. --Murray Gell-Mann (Quark and the Jaguar) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 02/03/13 00:34, James Knott wrote:
Basil Chupin wrote:
That would be Krunner and I haven't found a way to configure it. I have been looking for a way because of a problem I mentioned here about running man pages with it. In KDE 3, there was a way to configure this, but I haven't found similar in KDE 4.
DARN! My oversight! :-(
You need to RIGHT-click on Gecko to see the Edit Applications entry - which will bring up a menu of all the apps you have installed, and you can then edit the commands.
Apologies for the confusion caused.
Now, try and find Krunner.
Sorry, but what am I missing here? Why do you keep bringing up Krunner for? The OP needs to edit/delete some commands and asked where they are stored. If there is an app which is installed then it would appear in the Menu. But to find were krunner is it's a matter of going into YaST Software Manager and do a search for 'krunner' and the File List will show that krunner is in /usr/bin - not that this will do any good 'cause krunner is an executable. BC -- Using openSUSE 12.2 x86_64 KDE 4.10.00 & kernel 3.8.0-2 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Basil Chupin wrote:
Now, try and find Krunner.
Sorry, but what am I missing here? Why do you keep bringing up Krunner for?
The OP needs to edit/delete some commands and asked where they are stored. If there is an app which is installed then it would appear in the Menu.
But to find were krunner is it's a matter of going into YaST Software Manager and do a search for 'krunner' and the File List will show that krunner is in /usr/bin - not that this will do any good 'cause krunner is an executable.
Unless I'm mistaken, Krunner is what runs, when you press Alt-F2. A box opens up, where you enter the command or URL you wish to execute. For example, until it broke, I'd press Alt-F2 and enter #<command> to open the man page for the command. In KDE 3, it was possible to configure this to chose what you wanted to happen with various commands. I can no longer find any way to do that. In my case, I want to find out why I am now opening Seamonkey, instead of Konqueror when I'm trying to read a man page. This function is broken and I have no idea how to fix it. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Anton Aylward wrote:
But did you see any commands for Kmail or Firefox or LibreOffice or any
other applications/packages? No, because I don't normally use that mechanism. So they won't be there.
Terry only asked where it was so he could delete them. I edited the file and they weren't in the pull-down any more.
Are you talking about something else like the Kickoff menu?
That method can do a lot of things. I've often used it to call up man pages. There used to be a way to change what happens, but I can no longer find that. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
James Knott said the following on 03/01/2013 10:06 AM:
Basil Chupin wrote:
Now, try and find Krunner.
Sorry, but what am I missing here? Why do you keep bringing up Krunner for?
The OP needs to edit/delete some commands and asked where they are stored. If there is an app which is installed then it would appear in the Menu.
But to find were krunner is it's a matter of going into YaST Software Manager and do a search for 'krunner' and the File List will show that krunner is in /usr/bin - not that this will do any good 'cause krunner is an executable.
Unless I'm mistaken, Krunner is what runs, when you press Alt-F2.
You are not mistaken.
A box opens up, where you enter the command or URL you wish to execute. For example, until it broke, I'd press Alt-F2 and enter #<command> to open the man page for the command.
And when I try that I get Konqueror starting up with "man:/sh" in the location bar and the KDE man page viewer. This is a vanilla 12.2 install, the BtrFS test platform I've spoken of before. I get the same on another machine running 12.2 on Reiser and one on ext4. All virgin installs.
In KDE 3, it was possible to configure this to chose what you wanted to happen with various commands. I can no longer find any way to do that. In my case, I want to find out why I am now opening Seamonkey, instead of Konqueror when I'm trying to read a man page. This function is broken and I have no idea how to fix it.
Perhaps because somewhere seamonkey is defined as a the default browser and not Konqueror? What does it say in the relevant systemsetting? Mind you, what I have looks nothing like http://maketecheasier.com/10-awesome-features-of-krunner-in-kde-4/2009/06/29 though some of those things work. Not all. IIWY I'd take a look at the source and see how it finds what browser to use. -- "It's better to light a candle than to curse the darkness." - Eleanor Roosevelt -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Anton Aylward wrote:
A box
opens up, where you enter the command or URL you wish to execute. For example, until it broke, I'd press Alt-F2 and enter #<command> to open the man page for the command. And when I try that I get Konqueror starting up with"man:/sh" in the location bar and the KDE man page viewer. This is a vanilla 12.2 install, the BtrFS test platform I've spoken of before. I get the same on another machine running 12.2 on Reiser and one on ext4. All virgin installs. This problem happens on 2 computers running 12.2 with the latest updates. It used to work properly on both, failing only recently. It still works properly on one system running 12.1 In KDE 3, it was possible to configure this to chose what you wanted to happen with various commands. I can no longer find any way to do that. In my case, I want to find out why I am now opening Seamonkey, instead of Konqueror when I'm trying to read a man page. This function is broken and I have no idea how to fix it. Perhaps because somewhere seamonkey is defined as a the default browser and not Konqueror? What does it say in the relevant systemsetting?
I have no idea why Seamonkey is starting. The default browser is Firefox. If I enter a URL, Firefox starts as expected. If I enter konqueor man:/<command> it works properly and displays the man page. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
James Knott wrote:
I have no idea why Seamonkey is starting. The default browser is Firefox. If I enter a URL, Firefox starts as expected. If I enter konqueor man:/<command> it works properly and displays the man page.
It appears I'm not alone in this problem: http://forums.opensuse.org/english/get-technical-help-here/applications/4724... -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
James Knott wrote:
James Knott wrote:
I have no idea why Seamonkey is starting. The default browser is Firefox. If I enter a URL, Firefox starts as expected. If I enter konqueor man:/<command> it works properly and displays the man page.
It appears I'm not alone in this problem:
http://forums.opensuse.org/english/get-technical-help-here/applications/4724...
And also: http://osdir.com/ml/plasma-bugs/2013-01/msg00383.html http://permalink.gmane.org/gmane.comp.kde.devel.bugs/1389275 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
James Knott said the following on 03/01/2013 11:46 AM:
I have no idea why Seamonkey is starting. The default browser is Firefox. If I enter a URL, Firefox starts as expected. If I enter konqueor man:/<command> it works properly and displays the man page.
... Somewhere in the config ... This is where I start grepping though ~/.kde4 for the string 'seamonkey' This is where I create a new, virgin, account to see if it hapens there as well ... -- intaxification (n): Euphoria at getting a tax refund, which lasts until you realize it was your money to start with. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Anton Aylward wrote:
James Knott said the following on 03/01/2013 11:46 AM:
I have no idea why Seamonkey is starting. The default browser is Firefox. If I enter a URL, Firefox starts as expected. If I enter konqueor man:/<command> it works properly and displays the man page. ... Somewhere in the config ...
This is where I start grepping though ~/.kde4 for the string 'seamonkey'
This is where I create a new, virgin, account to see if it hapens there as well ...
I just tried in an existing account, where I have never used a desktop before. It appears to work there, so I guess something got changed under .kde, but I have no idea what. It's not in krunnerrc. How do you grep all the files under a directory? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 03/01/2013 09:44 AM, James Knott wrote:
Anton Aylward wrote:
James Knott said the following on 03/01/2013 11:46 AM:
I have no idea why Seamonkey is starting. The default browser is Firefox. If I enter a URL, Firefox starts as expected. If I enter konqueor man:/<command> it works properly and displays the man page. ... Somewhere in the config ...
This is where I start grepping though ~/.kde4 for the string 'seamonkey'
This is where I create a new, virgin, account to see if it hapens there as well ...
I just tried in an existing account, where I have never used a desktop before. It appears to work there, so I guess something got changed under .kde, but I have no idea what. It's not in krunnerrc.
How do you grep all the files under a directory?
grep -r seamonkey .kde -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Jim Cunning wrote:
I just tried in an existing account, where I have never used a desktop
before. It appears to work there, so I guess something got changed under .kde, but I have no idea what. It's not in krunnerrc.
How do you grep all the files under a directory?
grep -r seamonkey .kde
Well, that certainly returned a lot of info, but nothing that indicates the cause of the problem. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
participants (5)
-
Anton Aylward -
Basil Chupin -
James Knott -
Jim Cunning -
Terry Eck