[opensuse] Streched Page on Acrobat and Kivio
Hi, I'm having a weird issue with Kivio and Adobe Acrobat, all the pages look streched. If a normal A4 page should look like this: ------- | | | | ------- I see it like this: ---- | | | | | | | | ---- Anybody seen this? OS: Opensuse 10.2 (x86_64) with latest patches HW: Dell Inspiron 6400 Ciro -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
2007/4/18, Ciro Iriarte
Hi,
I'm having a weird issue with Kivio and Adobe Acrobat, all the pages look streched. If a normal A4 page should look like this:
------- | | | | -------
I see it like this:
---- | | | | | | | | ----
Anybody seen this?
OS: Opensuse 10.2 (x86_64) with latest patches HW: Dell Inspiron 6400
Ciro
This is a document open with KPDF: http://img215.imageshack.us/img215/8527/kpdfil7.png The same document with Acrobat: http://img208.imageshack.us/img208/5513/acrobattw4.png * Other apps like OpenOffice Writer don't have this issue. * Zoom changes nothing. * VGA: 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) * Driver: i810 according to xorg.conf * I'm not quite sure if this starting recently or happened since install. Ciro -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
I'm having a weird issue with Kivio and Adobe Acrobat, all the pages look streched. If a normal A4 page should look like this:
Looks familiar... I ran into this with 10.0. It's not happening to me anymore (in 10.2) though. Acrobat does (used to do?) some funny magic with the screen dimensions as set in your xorg.conf file. It bases its rendering on those dimensions. You could take a look in you xorg.conf and check to see that the physical screen dimensions are set correctly. C. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
2007/4/19, Clayton
I'm having a weird issue with Kivio and Adobe Acrobat, all the pages look streched. If a normal A4 page should look like this:
Looks familiar... I ran into this with 10.0. It's not happening to me anymore (in 10.2) though. Acrobat does (used to do?) some funny magic with the screen dimensions as set in your xorg.conf file. It bases its rendering on those dimensions. You could take a look in you xorg.conf and check to see that the physical screen dimensions are set correctly.
C. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Here's part of xorg.conf, i don't see any phisical dimentions declaration: --------------------------Section "Monitor" DisplaySize 662 207 HorizSync 30-62 Identifier "Monitor[0]" ModelName "FD1631154WB4 LCD MONITOR" Option "DPMS" VendorName "CPT" VertRefresh 43-60 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828 Modeline "1280x800" 69.75 1280 1328 1360 1440 800 803 809 823 +HSync -Vsync Modeline "1024x768" 64.11 1024 1080 1184 1344 768 769 772 795 Modeline "1024x768" 55.00 1024 1072 1104 1184 768 771 775 790 +HSync -Vsync Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622 Modeline "800x600" 34.75 800 848 880 960 600 603 607 617 +HSync -Vsync Modeline "1024x768" 66.33 1024 1080 1184 1344 768 769 772 796 Modeline "1024x600" 50.60 1024 1064 1168 1312 600 601 604 622 Modeline "800x600" 39.49 800 832 912 1024 600 601 604 622 Modeline "768x576" 36.13 768 792 872 976 576 577 580 597 Modeline "640x480" 24.70 640 656 720 800 480 481 484 498 EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1280x800" "1024x768" "800x600" EndSubSection SubSection "Display" Depth 16 Modes "1280x800" "1024x768" "800x600" EndSubSection SubSection "Display" Depth 24 Modes "1280x800" "1024x768" "800x600" EndSubSection SubSection "Display" Depth 8 Modes "1280x800" "1024x768" "800x600" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Device" BoardName "945 GM" BusID "0:2:0" Driver "i810" Identifier "Device[0]" Option "DRI" Option "SaXDualHead" Option "SaXDualMonitorVendor" "--> VESA" Option "MetaModes" "1280x800-1024x768;1024x768-1024x768;800x600-800x600" Option "MonitorLayout" "CRT,LFP" Option "SecondMonitorHorizSync" "31-50" Option "SaXDualOrientation" "LeftOf" Option "SaXDualResolution" "1024x768" Option "SecondMonitorVertRefresh" "50-60" Option "SaXDualHSync" "31-50" Option "Clone" "yes" Option "SaXDualMonitorModel" "1024X768@60HZ" Option "SaXDualVSync" "50-60" VendorName "Intel" EndSection ------------------------------- Here are more screenshots: Acrobat with suse manual: http://img207.imageshack.us/img207/6458/acro2me8.png Acrobat with /usr/share/doc/packages/mysql/manual.pdf: http://img207.imageshack.us/img207/3418/acro3nt8.png Kivio: http://img207.imageshack.us/img207/5052/kiviostrechedsb1.jpg OpenOffice looks just fine..... Ciro -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sun, 2007-04-22 at 22:54 -0400, Ciro Iriarte wrote:
2007/4/19, Clayton
: I'm having a weird issue with Kivio and Adobe Acrobat, all the pages look streched. If a normal A4 page should look like this:
Looks familiar... I ran into this with 10.0. It's not happening to me anymore (in 10.2) though. Acrobat does (used to do?) some funny magic with the screen dimensions as set in your xorg.conf file. It bases its rendering on those dimensions. You could take a look in you xorg.conf and check to see that the physical screen dimensions are set correctly.
C. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Here's part of xorg.conf, i don't see any phisical dimentions declaration:
--------------------------Section "Monitor" DisplaySize 662 207 ^^^^^^^^^^^ size in mm Horz/Vert
In this case = 26" x 8.14". To convert inches to MM, inches X 25.4 = MM. -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
2007/4/22, Kenneth Schneider
On Sun, 2007-04-22 at 22:54 -0400, Ciro Iriarte wrote:
2007/4/19, Clayton
: I'm having a weird issue with Kivio and Adobe Acrobat, all the pages look streched. If a normal A4 page should look like this:
Looks familiar... I ran into this with 10.0. It's not happening to me anymore (in 10.2) though. Acrobat does (used to do?) some funny magic with the screen dimensions as set in your xorg.conf file. It bases its rendering on those dimensions. You could take a look in you xorg.conf and check to see that the physical screen dimensions are set correctly.
C. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Here's part of xorg.conf, i don't see any phisical dimentions declaration:
--------------------------Section "Monitor" DisplaySize 662 207 ^^^^^^^^^^^ size in mm Horz/Vert
In this case = 26" x 8.14". To convert inches to MM, inches X 25.4 = MM.
-- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Oops, overlooked that line.... Well if that's 66cm, that must be wrong.... Should i set up it by had with yast?, i'll better look for the specs of the laptop.... Ciro -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
--------------------------Section "Monitor" DisplaySize 662 207 ^^^^^^^^^^^ size in mm Horz/Vert
Oops, overlooked that line.... Well if that's 66cm, that must be wrong.... Should i set up it by had with yast?, i'll better look for the specs of the laptop....
You can do a quick and dirty fix on this if you're comfortable editing by hand... - Measure the physical dimensions of your monitor (use a ruler, tape measure etc. or get it from the monitor spec sheet if you have it) - Log out of KDE - Log in as root (in a terminal, not in a GUI) - Switch to run level 3 (init 3) - Backup your existing xorg.conf (just in case) - Use your favorite text editor, and edit xorg.conf - Change the DisplaySize setting to match the actual (measured) dimensions of your monitor screen - Save, and test by restarting X (eg switch to a second terminal, log in as user and use startx to launch KDE.. if you have any errors they will be show in the terminal... or just switch back to run level 5) You can do the same through YAST (SAX2) if you prefer. I'd still recommend backing up your existing working xorg.conf first. If it works, you know you're on the right track (if it fails, it's a simple matter of restoring your xorg.conf backup to get back to where you were)... next test is make sure that your dual head stuff still works as expected. Just guessing here, but It's possible that the odd monitor dimension was set that large by SAX when you set up your dual head stuff. C. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
2007/4/23, Clayton
--------------------------Section "Monitor" DisplaySize 662 207 ^^^^^^^^^^^ size in mm Horz/Vert
Oops, overlooked that line.... Well if that's 66cm, that must be wrong.... Should i set up it by had with yast?, i'll better look for the specs of the laptop....
You can do a quick and dirty fix on this if you're comfortable editing by hand... - Measure the physical dimensions of your monitor (use a ruler, tape measure etc. or get it from the monitor spec sheet if you have it) - Log out of KDE - Log in as root (in a terminal, not in a GUI) - Switch to run level 3 (init 3) - Backup your existing xorg.conf (just in case) - Use your favorite text editor, and edit xorg.conf - Change the DisplaySize setting to match the actual (measured) dimensions of your monitor screen - Save, and test by restarting X (eg switch to a second terminal, log in as user and use startx to launch KDE.. if you have any errors they will be show in the terminal... or just switch back to run level 5)
You can do the same through YAST (SAX2) if you prefer. I'd still recommend backing up your existing working xorg.conf first.
If it works, you know you're on the right track (if it fails, it's a simple matter of restoring your xorg.conf backup to get back to where you were)... next test is make sure that your dual head stuff still works as expected. Just guessing here, but It's possible that the odd monitor dimension was set that large by SAX when you set up your dual head stuff.
C. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Weird, SAX, when asked to set the dimensions by hand, gives the good ones (not the same in xorg.conf), already downloaded the specs of the laptop, i'll test it today. Should that wrong parameters affect all the apps? Ciro -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
2007/4/25, Ciro Iriarte
2007/4/23, Clayton
: --------------------------Section "Monitor" DisplaySize 662 207 ^^^^^^^^^^^ size in mm Horz/Vert
Oops, overlooked that line.... Well if that's 66cm, that must be wrong.... Should i set up it by had with yast?, i'll better look for the specs of the laptop....
You can do a quick and dirty fix on this if you're comfortable editing by hand... - Measure the physical dimensions of your monitor (use a ruler, tape measure etc. or get it from the monitor spec sheet if you have it) - Log out of KDE - Log in as root (in a terminal, not in a GUI) - Switch to run level 3 (init 3) - Backup your existing xorg.conf (just in case) - Use your favorite text editor, and edit xorg.conf - Change the DisplaySize setting to match the actual (measured) dimensions of your monitor screen - Save, and test by restarting X (eg switch to a second terminal, log in as user and use startx to launch KDE.. if you have any errors they will be show in the terminal... or just switch back to run level 5)
You can do the same through YAST (SAX2) if you prefer. I'd still recommend backing up your existing working xorg.conf first.
If it works, you know you're on the right track (if it fails, it's a simple matter of restoring your xorg.conf backup to get back to where you were)... next test is make sure that your dual head stuff still works as expected. Just guessing here, but It's possible that the odd monitor dimension was set that large by SAX when you set up your dual head stuff.
C. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Weird, SAX, when asked to set the dimensions by hand, gives the good ones (not the same in xorg.conf), already downloaded the specs of the laptop, i'll test it today. Should that wrong parameters affect all the apps?
Ciro
Thanks a lot for the help, changing the screen size solved the problem, i'm not sure how the wrong sizes got there. Ciro -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (3)
-
Ciro Iriarte
-
Clayton
-
Kenneth Schneider