Hello! I hope that a hardware guru may be able to help me with this USB Pin problem. MOBO pin outs 1 2 3 4 5 6 7 8 9 10 1 +5V fused 2 +5V fused 3 USB- 4 USB- 5 USB+ 6 USB+ 7 Ground 8 Ground 9 Key 10 NC Case front USB connectors These connectors are individual, not bundled Black wire = Power Purple wire = Power Red wire = D2+ Tan wire = D2- Green wire = D3+ Blue wire = D3- Yellow wire = Gnd Orange wire = Gnd I have no documentation on this case so I am not sure which bundles should be together: Any thoughts or advice would be appreciated. John -- Registered Linux User 263680, get counted at http://counter.li.org