PCMCIA Networking & CD Rom Burner
Hi All, I have just recently moved to Linux, currently Red Hat, but I will be moving to SUSE 7.1 over this weekend. Now that I have got a couple of minor problems fixed. I have purchased a D-link DFE-650TXD 10/100 Ethernet pc card and it has been sold as working with Linux. I have checked the Dlink website and there is no mention of Linux at all. I am hoping that someone might be able to help with some hints on where to get started with getting a PCMCIA network card to work with Linux. I have purchased the book "Linux on Laptops" but it mentions to use the provided drivers, alas there are none. Does someone have some idea of what drivers might work with this card and where to find them. I am also in the future hoping to get a PCMCIA HP cd burner working, is this possible, I am hoping that the answer is yes. if not it wont be such a problem as a network card. I have several PCMCIA network cards so if anyone has some hints they will be greatly appreciated. Thanks in advance, Shane Broomhall
On Tue, 1 May 2001, Shane A Broomhall wrote: > I have purchased a D-link DFE-650TXD 10/100 Ethernet pc card and it has been > sold as working with Linux. I have checked the Dlink website and there is no > mention of Linux at all. I am hoping that someone might be able to help with > some hints on where to get started with getting a PCMCIA network card to work > with Linux. I have installed Linux on many laptops, and the good news is that PCMCIA ethernet cards have never been a problem. (Cardbus, however, may be another story...) The pcmcia config file shipped with the rpm has entries for every ethernet card I've ever encountered. There is, in fact, an entry there for the D-Link DFE-650. Here's the quick tips: 1) As you install SuSE, be sure to select the 'pcmcia' package. 2) When you get to the 'configuring networking' part, tell it that you have ZERO network cards. That means leave it blank, not '_0'! 3) Once your machine is up and running, edit /etc/pcmcia/network.opts. There are clearly commented options for your IP address, etc. Personally, I simply set DHCP=yes and let my server do the work. 4) Plug in a network cable, insert the PCMCIA card, wait a few seconds, run 'ifconfig eth0' and discover it's all working! Now if I could just get my sound, keyboard, and suspend-to-disk working, I could put my latest laptop to work! -- Rick Green "I have the heart of a little child, and the brain of a genius. ... and I keep them in a jar under my bed"
Rick, what sound card are you using? I have two laptops, a dell inspiton where I am writting this email just now (running W2K, RD and in the past SuSE) and an HP Pavilion in which I am installing SuSE 7.1 while writing this email. I can tell you initially my sound didnt work in the dell (sound card ESS) and Im sure it will not work on the HP once done (another ESS) and I will be looking on my very old docs cause I have somewhere the needed info to make it work. Let me know about your laptop and sound card, so I can provide you with the info I have. If it will help you I will work it out (need to go somewhere to scan it and all that), if it will not then I will not loose time doing all that for nothing. Rik. --- Rick Greenwrote: > On Tue, 1 May 2001, Shane A Broomhall wrote: > > > I have purchased a D-link DFE-650TXD 10/100 > Ethernet pc card and it has been > > sold as working with Linux. I have checked the > Dlink website and there is no > > mention of Linux at all. I am hoping that someone > might be able to help with > > some hints on where to get started with getting a > PCMCIA network card to work > > with Linux. > I have installed Linux on many laptops, and the > good news is that PCMCIA > ethernet cards have never been a problem. (Cardbus, > however, may be > another story...) The pcmcia config file shipped > with the rpm has > entries for every ethernet card I've ever > encountered. There is, in fact, > an entry there for the D-Link DFE-650. > Here's the quick tips: > 1) As you install SuSE, be sure to select the > 'pcmcia' package. > 2) When you get to the 'configuring networking' > part, tell it that you > have ZERO network cards. That means leave it blank, > not '_0'! > 3) Once your machine is up and running, edit > /etc/pcmcia/network.opts. There are clearly > commented options for your IP > address, etc. Personally, I simply set DHCP=yes and > let my server do the > work. > 4) Plug in a network cable, insert the PCMCIA card, > wait a few seconds, > run 'ifconfig eth0' and discover it's all working! > > Now if I could just get my sound, keyboard, and > suspend-to-disk working, I > could put my latest laptop to work! > > -- > Rick Green > > "I have the heart of a little child, and the brain > of a genius. > ... and I keep them in a jar under my bed" > > > -- > To unsubscribe send e-mail to > suse-linux-e-unsubscribe@suse.com > For additional commands send e-mail to > suse-linux-e-help@suse.com > Also check the FAQ at > http://www.suse.com/support/faq and the > archives at http://lists.suse.com > __________________________________________________ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/
participants (3)
-
Ricardo Rodriguez
-
Rick Green
-
Shane A Broomhall