Greetings. I have been beating my head against the wall for about 2 hours now trying to get NFS server to startup so I can export my filesystems. Here is what I am using: Suse-6.4 Dell Latitude 400Mhz Celeron w/128MB 3COM589D PCMCIA linux-2.4.0-test8 knfsd-991001-133 If I do the command '/etc/rc.d/rc2.d/S17nfsserver start' I get the message: Starting kernel based NFS serverlockdsvc: Invalid argument The offending lines in '/erc/rc.d/rc2.d/S17nfsserver' are: checkproc -n lockd checkproc -n lockd || \ /usr/sbin/rpc.klockd || return=$rc_failed Below are the options I used for compiling my kernel: # # Network File Systems # # CONFIG_CODA_FS is not set CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_SMB_FS=y I have also attached my '/etc/rc.config' file. Any insight someone could have would be VERY much appreciated. I have used a lot of other Linux distributions, but am finding SuSe to be a bit tough to get working. I have yet to also get it to recognize my PCMCIA modem on a consistent basis, but that's another story... Thanks. -Steve -- Steven J. Hill - Embedded SW Engineer Public Key: 'finger sjhill@mail.cotw.com' FPR1: E124 6E1C AF8E 7802 A815 FPR2: 7D72 829C 3386 4C4A E17D KEYTABLE="us.map.gz" LANGUAGE="english" # # Some people don't want SuSEconfig to modify the system. With this # entry you can disable SuSEconfig completely. # Please don't contact our support if you have trouble configuring your # system after having disabled SuSEconfig. (yes/no) # ENABLE_SUSECONFIG=yes # # If you say yes here, you will have some control over the system even # if the system crashes for example during kernel debugging. # Please consult /usr/src/linux/Documentation/sysrq.txt # for further information. # ENABLE_SYSRQ=no # # # Local users will get RC_LANG as their default language, # i.e. the environment variable $LANG . $LANG is the default # of all $LC_*-variables, as long as $LC_ALL is not set, which # overrules all $LC_-variables. If empty, $LANGUAGE will be used. # Root uses this variable only if ROOT_USES_LANG is set to "YES" # # RC_LANG="" # # This variable will overrule all LC-variables!! # Again, ROOT_USES_LANG has to be set to YES in order # to get any effect for the superuser. # RC_LC_ALL="" # # This defines the locale in which messages of programs and # libraries with i18n-support should appear if a translated # message catalog for the library or the program is installed. # It also defines yes/no answers which are defined by the locale. # RC_LC_MESSAGES="" # # This defines the locale for character handling and classification. # The locale defined here is used by the libc in functions which # are used to qualify if this character is an charcater which may # be used in an text string, if the character is e.g. lowercase # and it defnes upper/lowercase-mapping of foreign characters # RC_LC_CTYPE="" # # This defines the locale for sorting strings and characters. # The locale defined here is used by the libc in functions which # are used to qualify if a character is befor or beyond an other # character in the alphabet. Note: sort(1) doesn't use these # functions, but other application such as databases may use it. # # To keep bash and possibly other apps from misbehavour because # of mixed upper/lowercase sorting with locales, you should keep # this at POSIX and just set it for the apps that need it: # RC_LC_COLLATE="POSIX" # # This defines the locale for date and time output formats. # i.e.: 06/09/1999 vs. 09.06.1999 # RC_LC_TIME="" # # This defines the locale for formatting and reading numbers. # i.e.: 1,234.56 vs. 1.234,56 # RC_LC_NUMERIC="" # # This defines the locale for formatting and reading money values. # RC_LC_MONETARY="" # # This defines if the user "root" should use the locale settings # which are defined here. # ROOT_USES_LANG="no" # # SuSEconfig can mail reports (created by YaST or included in packages) # to you. Here you can set the address. If you don't want reports to # be send, then simply set it to "". # MAIL_REPORTS_TO="root" # # There are two levels of mailing. If you set MAIL_LEVEL it to "warn" # you only get the important mails. If you set it to "all", you get # logs also. # MAIL_LEVEL="warn" # # Which device is the mouse ? (e.g. "/dev/ttyS0") # MOUSE="/dev/psaux" # # Which device is the modem ? (e.g. "/dev/ttyS1") # MODEM="/dev/ttyS2" # # Load this console font upon bootup: # CONSOLE_FONT="" # # Does your console font need a screenmap? Insert it into CONSOLE_SCREENMAP. # CONSOLE_SCREENMAP="" # # some fonts/keymap need a unicode map (TRANSLATION in former releases). # add it to CONSOLE_UNICODEMAP. # CONSOLE_UNICODEMAP="" # # for some fonts the console has to be initialized with CONSOLE_MAGIC. # CONSOLE_MAGIC can be empty or have the values "(B", ")B", "(K" or ")K". # CONSOLE_MAGIC="" # # keyboard repeat rate (2.0 - 30.0) # keyboard delay time in ms (250, 500, 750, 1000) # (If you want "kbdrate" to be executed, you have to set both of them.) # KBD_RATE="" KBD_DELAY="" # # NumLock on? ("yes" or "no") KBD_NUMLOCK="no" # # CapsLock on? ("yes" or "no") KBD_CAPSLOCK="no" # # tty's for NumLock and CapsLock # example: "tty1 tty2" # "" for all tty's # KBD_TTY="tty1 tty2 tty3 tty4 tty5 tty6" # # Set to "-u" if your system clock is set to GMT, otherwise "". # GMT="" # # Timezone (e.g. CET) # (this will set /usr/lib/zoneinfo/localtime) # TIMEZONE="CST6CDT" # # start loopback networking? ("yes" or "no") # (this will be needed for all rpc services) # START_LOOPBACK="yes" # # networking # # number of network cards: "_0" for one, "_0 _1 _2 _3" for four cards # NETCONFIG="_0" # # contains all indices of active PCMCIA network devices # NETCONFIG_PCMCIA="_0" # # IP Adresses # IPADDR_0="192.168.10.13" IPADDR_1="" IPADDR_2="" IPADDR_3="" # # network device names (e.g. "eth0") # NETDEV_0="eth0" NETDEV_1="" NETDEV_2="" NETDEV_3="" # # parameteres for ifconfig, simply enter "bootp" or "dhcpclient" to use the # respective service for configuration # sample entry for ethernet: # IFCONFIG_0="192.168.81.38 broadcast 192.168.81.63 netmask 255.255.255.224" # IFCONFIG_0="192.168.10.13 broadcast 192.168.10.255 netmask 255.255.255.0 up" IFCONFIG_1="" IFCONFIG_2="" IFCONFIG_3="" # # setup dummy network device for IPADDR_0? this is useful for non permanent # network connections (e.g. SLIP, PPP). Some software needs a connection # to FQHOSTNAME (e.g. plp). (yes, no) SETUPDUMMYDEV="no" # # Do you want the "dynamic IP patch" to be enabled at bootup? (yes/no) # IP_DYNIP=no # # Enable syn flood protection (see /usr/src/linux/Documentation/Configure.help) # (yes/no) # IP_TCP_SYNCOOKIES=yes # # runtime-configurable parameter: forward IP packets. # Is this host a router? (yes/no) # IP_FORWARD=no # # SuSEconfig can do some checks and modifications in /etc/hosts. # If this is not wanted, set the following variable to 'no' (yes, no). # CHECK_ETC_HOSTS=yes # # If CHECK_ETC_HOSTS is set to yes, SuSEconfig sorts your # /etc/hosts. But in some cases this may be unwanted. So here is a # flag, where you can configure if /etc/hosts should be "beautified". # (yes/no) # BEAUTIFY_ETC_HOSTS=no # # if SORT_PASSWD_BY_UID is set to yes, SuSEconfig sorts your /etc/passwd # and /etc/group by uid/gid. # SORT_PASSWD_BY_UID=no # # hostname of the system (full name) # if zero, and bootp is used above, bootp will also set the hostname # (e.g. "riemann.suse.de" or "hugo.linux.de") # don't forget to also edit /etc/hosts for your system # FQHOSTNAME="laptop1.sjh.net" # # SuSEconfig can create and check the /etc/host.conf for you. Should this # be done ("yes" or "no"). # CREATE_HOSTCONF="yes" # # Shall SuSEconfig maintain /etc/resolv.conf (needed for DNS) ? # If set to yes and one of SEARCHLIST and NAMESERVER is empty, # it is assumed, that no DNS is wanted and /etc/resolv.conf will # be deleted. If yes and both are filled out, it will be created. # "no" leaves /etc/resolv.conf untouched. # CREATE_RESOLVCONF=yes # # domain searchlist that should be used in /etc/resolv.conf # (e.g. "suse.de linux.de uni-stuttgart.de") # Attention! this has to be filled out, if you want to access a name server # SEARCHLIST="" # # space separated list of nameservers that should be used for /etc/resolv.conf # give a maximum of 3 IP numbers # (e.g. "192.168.116.11 192.168.7.7") # NAMESERVER="192.168.10.1" # # Used for News-Postings. # ORGANIZATION="" # # News server. # NNTPSERVER="news" # # space separated list of irc servers # IRCSERVER="" # # start the inet daemon in multi-user? ("yes" or "no") # this is needed, if you have to telnet/rlogin to your own machine. # It is also needed for the man page formatter in SuSE Help system # and for starting the plp lp daemon. # START_INETD="yes" # # have mail daemon on SMTP port? ("yes" or "no") # needed, if you receive email from other hosts via tcp/ip # not needed, if you have a uucp-only host or only out-going email. # If set to "yes", sendmail will be started as daemon. # As uucp site, you can get along with "SMTP=no", if you make # a "sendmail -q" call after each poll. (As rmail is queuing the mail only # and not delivering it...) # SMTP="no" # # From:-Line in email and News postings # (otherwise the FQDN is used) # FROM_HEADER="laptop1.sjh.net" # # some programs (e.g. lynx, arena and wget) support proxies, if set in # environment. SuSEconfig can add this environment variables to # /etc/SuSEconfig/* (sourced by /etc/profile etc.) - See # http://www.suse.de/Support/sdb_e/lynx_proxy.html for more details. # Example: HTTP_PROXY="http://proxy.provider.de:3128/" HTTP_PROXY="" # # Example: FTP_PROXY="http://proxy.provider.de:3128/" # FTP_PROXY="" # # Example: GOPHER_PROXY="http://proxy.provider.de:3128/" # GOPHER_PROXY="" # # Example: NO_PROXY="www.me.de, do.main, localhost" # NO_PROXY="localhost" # # start kernel daemon? ("yes" or "no") # START_KERNELD="yes" # # start cron daemon? ("yes" or "no") # should be left unchanged to the default "yes" entry # CRON="yes" # # start portmap? ("yes" or "no") # this is needed, if the NFS server is started or if NIS is used # Caution! The portmapper will be started with no regard to # START_PORTMAP if NFS_SERVER is set to "yes"! # START_PORTMAP="yes" # # should the NFS server be started on this host? ("yes" or "no") # (needs activated portmapper) # NFS_SERVER="yes" # # should the kernel based NFS server be started on this host # (instead of the user space version) ? ("yes" or "no") # THIS NEEDS A 2.1 KERNEL WITH NFSD SUPPORT # USE_KERNEL_NFSD="yes" # # the kernel nfs-server supports multiple server threads # USE_KERNEL_NFSD_NUMBER="4" # # translates userid and goupid between server and client # ("yes" or "no"). Needs to be started on NFS clients for # certain special user-id mappings. # NFS_SERVER_UGID="no" # # should imported NFS be reexported? ("yes" or "no") # REEXPORT_NFS="no" # # when shutting down routing, all net connection can be closed (not useful # in all cases). If CLOSE_CONNECTIONS is set to "true" /sbin/init.d/route # scans /proc to search for network connections and sends a term signal # to the processes. # CLOSE_CONNECTIONS="false" # # start pcnfsd (for PCNFS clients; needs activated portmapper - # see man pcnfsd) (yes/no) # START_PCNFSD=no # # start bwnfsd (pcnfs related) (yes/no) # START_BWNFSD=no # # pcnfsd and bwnfsd need spool directory for lpd. Set it here. # PCNFSD_LPSPOOL=/var/spool/lpd # # start rwhod? NOTE: rwhod broadcasts regularly, so dial # on demand connections (ISDN and/or diald) might be established # (yes/no) # START_RWHOD=no # # should gpm be started on this machine? ("yes" or "no") # START_GPM="yes" # # gpm will be started with these parameters # it won't be started in runlevel 3 (xdm) # (example: "-t msc -m /dev/mouse") # GPM_PARAM=" -t imps2 -m /dev/mouse" # # start routed (for dynamic routing - see man routed) (yes/no) # ATTENTION: starting routed causes net traffic every 30 seconds. # If your host is connected to internet via dial-up it makes absolutely # no sense to activate it. # START_ROUTED=no # # start the named (package bind)? You have to configure the named first, # before you can start it (man named). # START_NAMED=no # # should updatedb (for locate) be started by cron.daily ("yes" or "no") # RUN_UPDATEDB=yes # # should mandb and whatis be recreated by cron.daily ("yes" or "no") # REINIT_MANDB=yes # # updatedb has a parameter "--localuser". it runs the find as this user. # some people think, its a security hole to run it as root (because you # can get information about directories you can not read normally). Some # think its useful to hold all files in the database. If you want full # information in locate db, set RUN_UPDATEDB_AS=root. If you want security # use RUN_UPDATEDB_AS=nobody. # RUN_UPDATEDB_AS=nobody # # uptdatedb normally only scans local harddisks, but can include net paths # in database as well. If you specify directories here, they will be scanned. # UPDATEDB_NETPATHS="" # # uptdatedb can skip directories for its database. The following parameter # says which. # UPDATEDB_PRUNEPATHS="/S.u.S.E. /mnt /cdrom /tmp /usr/tmp /var/tmp /var/spool /proc" # # search net paths as ? (e.g. nobody) # UPDATEDB_NETUSER="" # # old corefiles? should they be deleted ("yes" or "no") # if set to no, cron.daily will tell you, if it finds old core files. # please note, that this feature needs RUN_UPDATEDB to be set to "yes". # DELETE_OLD_CORE=yes # # how old are 'old' core files? (in days) # MAX_DAYS_FOR_CORE=3 # # should old preformated man pages be deleted (/var/catman) # (yes/no) # DELETE_OLD_CATMAN=yes # # How old are OLD preformated man pages for you? (days) # CATMAN_ATIME=3 # # we have a small script to generate usr/info/dir file. This needs perl.. # ("yes" or "no") # CREATE_INFO_DIR="yes" # # SuSEconfig can call chkstat to check permissions and ownerships for # files and directories (using /etc/permissions). # Setting to "set" will correct it, "warn" produces warnings, if # something strange is found. Disable this feature with "no". # CHECK_PERMISSIONS=set # # SuSE Linux contains two different configurations for # chkstat. The differences can be found in /etc/permissions.secure # and /etc/permissions.easy. If you create your own configuration # (e.g. permissions.foo), you can enter the extension here as well. # # (easy/secure local foo whateveryouwant). # PERMISSION_SECURITY="easy local" # # How long to store old log files. If set to 0, log files will be untouched. # The log files below will be checked by cron.daily. The number # after the name means the minimum size in k, the file has to have, before # it will be backed up (root gets a mail, if it happens). # # /tmp/log_mg.* (1024), /var/log/wtmp (400), /var/log/isdn (4096), # /var/lib/xdm/xdm-errors (200), /var/spool/uucp/Log (2048), # /var/spool/uucp/Stats (1024), /var/log/debug (1024), /var/log/warn (1024), # /var/log/messages (4096), /var/log/xferlog (4096), # /local/www/logs/access_log (4096), /local/www/logs/error_log (1024) # /var/adm/isdn.log (1024), /var/log/isdncalls (1024) # MAX_DAYS_FOR_LOG_FILES=30 # # cron.daily can make backup the rpm database. Set the path here, and # cron.daily will make backup everytime it is called and the db has # changed. This backups are recommended. If you don not want this # feature, set it to "". # RPMDB_BACKUP_DIR=/var/adm/backup/rpmdb # # here you can set the maximum number of backup files for the rpm # database. # MAX_RPMDB_BACKUPS=5 # # cron.daily can check for old files in tmp-dirs. It will delete all files # not accessed for more than MAX_DAYS_IN_TMP. If MAX_DAYS_IN_TMP is not set # or set to 0, this feature will be disabled. # MAX_DAYS_IN_TMP=0 # # You can specify in TMP_DIRS_TO_CLEAR, which directories have to be # searched for old files, to be deleted. # TMP_DIRS_TO_CLEAR="/tmp /var/tmp" # # In OWNER_TO_KEEP_IN_TMP, you can specify, whoms file shall not be deleted. # OWNER_TO_KEEP_IN_TMP="root" # # Do you want to have "." in root path? This is not recommended, but # many people do prefer it (yes/no). # CWD_IN_ROOT_PATH="no" # # If you want to allow root logins from other machines, set ROOT_LOGIN_REMOTE # to "yes". # ROOT_LOGIN_REMOTE="no" # # If you want that new passwords will be checked through cracklib, # set PASSWD_USE_CRACKLIB to "yes". # PASSWD_USE_CRACKLIB="no" # # Some packages by SuSE include dynamically linked motif progs as well # as statically linked (*.SuSE-dynamic resp. *.SuSE-static). SuSEconfig # can analyze your system and link the matching program to *. If you # set this to "clean", the other binary will be deleted. (no/link/clean) # HOW_TO_HANDLE_COMMERCIAL_LIBS=link # # SuSEconfig can do some modifications to /etc/inittab. If you don't want # this, set CHECK_INITTAB to no. (yes/no) # CHECK_INITTAB=yes # # Here you can set the default Display manager (kdm/xdm/console). # Attention: CHECK_INITTAB has to be set to yes, to activate this feature. # If DISPLAYMANAGER is set to console, SuSEconfig will not bother you # with a missing XF86Config. # # Login Manager changed by Helix Code Installer DISPLAYMANAGER="gdm" #Old DISPLAYMANAGER: #DISPLAYMANAGER="" # # Here you can set the default window manager (kde, fvwm, ...) # DEFAULT_WM=sawfish # # CONSOLE_SHUTDOWN determines how ctrl-alt-del is handled. # Attention: CHECK_INITTAB has to be set to yes, to activate this feature. # (ignore/reboot/halt) # CONSOLE_SHUTDOWN=reboot # # run the Name Service Caching Daemon at boot time? (yes/no) # START_NSCD=no umask 022 # # Attention! This variable PATH is NOT setting the PATH for user or root # shells. It is only used internally for /sbin/init.d/*, SuSEconfig and # cron.daily. Please do NOT change PATH here. # PATH=/sbin:/bin:/usr/sbin:/usr/bin ## ## Formating the boot script messages: ## The boot scripts should use the variables rc_done and rc_fail to ## symbolize their success. See /sbin/init.d/skeleton for an example ## how to use these variables. ## rc_done_up and rc_failed_up do the same as rc_done and rc_failed ## but one line above (usefull for starting daemons who talk to user). ## The variable rc_reset is used by the master resource control script ## /sbin/init.d/rc to turn off all attributes and switch on the standard ## character set. ## ## \033 is just ascii ESC ## \033[<NUM>G move to column <NUM> ## \033[1m switch bold on ## \033[31m switch red on ## \033[32m switch green on ## \033[33m switch yellow on ## \033[m switch color/bold off ## rc_done="\033[71G\033[32mdone\033[m" rc_failed="\033[71G\033[31m\033[1mfailed\033[m" rc_skipped="\033[71G\033[1mskipped\033[m" rc_done_up="\033[1A$rc_done" rc_failed_up="\033[1A$rc_failed" rc_unused="\033[71G\033[1munused\033[m" rc_reset="\033[m\017" # # Should the ATD (at daemon) be started, for the execution of at jobs? (yes/no) # START_ATD=yes # # Update groff DESC to get page sizes correct? (yes/no) # # If the correct page size isn't found in your printcap # you can set GROFF_PAGESIZE to the following values # # letter, legal, a4, or b5 # # supported by both groff *and* ghostscript # UPDATE_GROFF_CONF=yes GROFF_PAGESIZE= # # Start the ident daemon in multi-user? ("yes" or "no") # Identd looks up specific TCP/IP connections and returns either # the user name or other information about the process that owns # the connection. # START_IDENTD="no" # # Start the rpc.rusersd daemon in multi-user? ("yes" or "no") # rpc.rusersd is a server which returns information about users currently # logged in to the system. # START_RUSERSD="no" # # Start the rpc.rstatd daemon in multi-user? ("yes" or "no") # rpc.rstatd is a RPC daemon which collects performance statistics from # kernel on serving machine. # START_RSTATD="no" # # Should PCMCIA service be started at boottime? (yes/no) # START_PCMCIA="yes" # # PCMCIA: This variable determines the used chipset. Valid Values are # "i82365" or "tcic". If it is left empty, pcmcia will not be startet # at boot up. # PCMCIA="i82365" # # PCMCIA_PCIC_OPTS - socket driver timing parameters here. These # parameters are described in "man i82365" (or "man tcic"). # e.g.: PCMCIA_PCIC_OPTS="par1=val1 par2=val21,val22 par3=val3" # For more information, look for "PCIC_OPTS" in the PCMCIA-HOWTO. # You can find it under /usr/doc/packages/pcmcia. # # If PCMCIA locks your System, try the following option with a list # of free interrupts (and which won't be used later) # e.g. PCMCIA_PCIC_OPTS="irq_list=3,4,5,7,9,10,11" # PCMCIA_PCIC_OPTS="" # # PCMCIA_CORE_OPTS - Put pcmcia_core options here. These options # are described in "man pcmcia_core" # For more information, look for "CORE_OPTS" in the PCMCIA-HOWTO. # You can find it under /usr/doc/packages/pcmcia. PCMCIA_CORE_OPTS="" # # May SuSEconfig modify your perllocal.pod? (yes/no) # CREATE_PERLLOCAL_POD="yes" # # May SuSEconfig run h2ph when kernelsources have changed # GENERATE_PERL_SYSTEM_INCLUDES="yes" # # Default loglevel for klogd # KERNEL_LOGLEVEL=1 # # if not empty: parameters for syslogd # for example SYSLOGD_PARAMS="-r -s my.dom.ain" # SYSLOGD_PARAMS="" # Start apmd? (yes/no) # apmd watches the status of the battery and triggers certain actions # when particular events occur. You can customize this actions in the # file /etc/rc.config.d/apmd.rc.config. # START_APMD=no # # Should isapnp be used to initialize your PNP at bootup? (yes/no) # START_ISAPNP=no # # Do you want USB support to be started? # Some notes: # * USB is currently experimental. It may as likely help you to get things # running as it might cause problems. # * You may be able to get along without USB support, if you just have an # USB keyboard and the BIOS does emulate a normal keyboard ... # * USB config is done via /etc/rc.config.d/usb.rc.config # START_USB="no" # # Shall auto mount daemon autofs be started? (yes/no) # START_AUTOFS=no # # autofs daemon options (e.g. --timeout 60) # AUTOFS_OPTIONS="" # # Should NIS(YP) be used for autofs (yes/no) # USE_NIS_FOR_AUTOFS=yes # # Should NIS+ be used for autofs (yes/no) # USE_NISPLUS_FOR_AUTOFS=no # # Shall the dynamic host configuration (DHCP) client be started? (yes/no) # Note: you can configure one or more ethernet interfaces # for DHCP configuration. To do this you have to change the IFCONFIG # variable for the respective network device, e.g. NETDEV_0="eth0" by # setting it to IFCONFIG_0="dhcpclient" # DHCLIENT="no" # # some interfaces need time to initialize. Add the latency time in seconds # so these can be handled properly # DHCLIENT_SLEEP=1 # # The name of the central server for the Online documentation # This should be a fully qualified host name, e.g. host.domain.top # DOC_HOST="localhost" # # Set this to yes on the central documentation server # Then the online-help-system indices are automatically adjusted # and access to the http-rman service is allowed # DOC_SERVER="no" # # List auf host/domain patterns for use with /etc/hosts.allow # access restrictions on http-rman, e.g. ".mydomain.top" to # allow access from all hosts of domain mydomain.top # DOC_ALLOW="LOCAL" # IrDA is the infrared interface often found on laptops. If you like to # activate support for the infrared port, please configure IrDA for your # system by editing/etc/irda/drivers. Please take a look into the IrDA # HOWTO, available in /usr/doc/howto/en/IR-HOWTO.gz on how to configure it. # START_IRDA=no # Currently the UART (SIR) mode is supported in the normal configuration. If # you like to have FIR (4 MBit/s, only for a few chipsets supported), you # should edit the file /etc/irda/drivers. The variable IRDA_PORT sets the # used UART port, variable IRDA_IRQ sets the used interrupt. # IRDA_PORT=/dev/ttyS1 IRDA_IRQ=3 # # Start printer daemon lpd? (if you use plp, you can also disable it here # an enable it in /etc/inetd.conf) (yes/no) # START_LPD=yes # # KDM_SHUTDOWN determines who will be able to shutdown the # system in kdm. Valid values are: "root", "all", "none", "local", # KDM_SHUTDOWN="Auto" # # space separated list of users for which icons should be shown in KDM # if empty, then take system defaults # KDM_USERS="" # # path of jpeg or xpm image to be shown in the background of kdm # or background color (color names from /usr/X11R6/lib/X11/rgb.txt) # KDM_BACKGROUND=/opt/kde/share/wallpapers/paper01.jpg # # title string of kdm, special string HOSTNAME displays name of computer # KDM_GREETSTRING="" # # Pixmap which appears on the top of a KDE window, do not specify full path # path name; it will be searched in KDE IconPath; no Gimmick if empty # just try: "chamelia.xpm" # KWM_GIMMICK_PIXMAP="" # # Start the TrueType font server for XFree 3.x. # X-Windows will not start, if the Server is not running, but the X server # is configured to use it. # XFSTT_START="yes" # # SuSEconfig.wm can create a .fvwm2rc, .fvwmrc, .bowmanrc, .fvwm2rc95, # .mwmrc, .ctwmrc, depending on the installed packages. If # you want your systemwide wm config files to be updated after install # / removal of packages set SUSEWM_UPDATE to "yes", otherwise to "no" # SUSEWM_UPDATE="yes" # # This is the (space separated) list of window managers for which you # want to generate the config file. Valid values are: # "fvwm", "fvwm2", "fvwm95", "bowman", "mwm", "ctwm", "kwm", "all". # Default setting is "all" which is for generating files for all wms. # SUSEWM_WM="all" # # Your fvwm2/95 is slow? Don't want small pixmaps in menus? So set # SUSEWM_XPM to "no", if pixmaps in menus are wanted set it to "yes", # which is the default value. The package 3dpixms has to be installed. # SUSEWM_XPM="yes" # # SERIAL_CONSOLE is used to add a serial terminal to inittab and securetty # The format is "ttyS0,9600" as used in the kernel commandline. # SERIAL_CONSOLE="" # # Start the ssh daemon ? (yes/no) # START_SSHD=yes # # Options for sshd # SSHD_OPTS="" -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq