[opensuse] Suse 10.2 +KDE +Evolution
I have a problem with evolution where everytine it goes out to check email or send email, it asks for the the password eventhough I have the remember password box checked. I sent a but report to Ximian and got the following back. "You can work around it this way: test@Merlin:~> gnome-keyring-daemon GNOME_KEYRING_SOCKET=/tmp/keyring-qdYsbQ/socket GNOME_KEYRING_PID=16304 test@Merlin:~> export GNOME_KEYRING_SOCKET=/tmp/keyring-qdYsbQ/socket test@Merlin:~> export GNOME_KEYRING_PID=16304 Substitute your socket and pid info in the above commands Then start evo from the command line and away you go" Then this: so this sounds like a future FAQ for folks using evo under KDE then. :-/ feel free to close as NOTABUG, or to add a workaround for KDE people in SuSE (wasn't the whole game about making the use of computers easier? ;-) , or to reassign to gnome-keyring-manager or whatever... :-) Problem is, the workaround only workas as long as you don't reboot. I turn off my computer every work day to save electricity, so this workaround is only a short term solution. Is Novell going to fix this or does anyone else have a solution so you don't have to do this work around evertime you start your computer? If there is no permanent fix, guess I will have to migrate to KMail. Art -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Tue, 2006-12-12 at 03:57 +0800, Art Fore wrote:
I have a problem with evolution where everytine it goes out to check email or send email, it asks for the the password eventhough I have the remember password box checked. I sent a but report to Ximian and got the following back.
"You can work around it this way:
test@Merlin:~> gnome-keyring-daemon GNOME_KEYRING_SOCKET=/tmp/keyring-qdYsbQ/socket GNOME_KEYRING_PID=16304
test@Merlin:~> export GNOME_KEYRING_SOCKET=/tmp/keyring-qdYsbQ/socket test@Merlin:~> export GNOME_KEYRING_PID=16304
Substitute your socket and pid info in the above commands
Then start evo from the command line and away you go"
Then this:
so this sounds like a future FAQ for folks using evo under KDE then. :-/ feel free to close as NOTABUG, or to add a workaround for KDE people in SuSE (wasn't the whole game about making the use of computers easier? ;-) , or to reassign to gnome-keyring-manager or whatever... :-)
Problem is, the workaround only workas as long as you don't reboot. I turn off my computer every work day to save electricity, so this workaround is only a short term solution. Is Novell going to fix this or does anyone else have a solution so you don't have to do this work around evertime you start your computer? If there is no permanent fix, guess I will have to migrate to KMail.
There is a permanent way around this. There is a package available called, pam_keyring. It is available at: http://ftp.gwdg.de/pub/opensuse/distribution/10.2/repo/oss/suse/i586/pam_key... The description of the package says: pam_keyring is a pam module that launches the gnome-keyring-daemon then tries to unlock a keyring using your login password. One other change I had to make... I had to change my displaymanager from kdm to gdm (I use kde). Now, when I login using gdm, the gnome-keyring-daemon is automatically started up and the environment is setup properly. I can now start evolution simply by clicking on it. The keyring is already unlocked simply by logging in. It works great. Rick -- Rick's Law: What cannot be imagined will be accomplished by a fool. PGP Key Id: 9E1125E0
On Mon, 2006-12-11 at 07:46 -0500, Rick Friedman wrote:
On Tue, 2006-12-12 at 03:57 +0800, Art Fore wrote:
I have a problem with evolution where everytine it goes out to check email or send email, it asks for the the password eventhough I have the remember password box checked. I sent a but report to Ximian and got the following back.
"You can work around it this way:
test@Merlin:~> gnome-keyring-daemon GNOME_KEYRING_SOCKET=/tmp/keyring-qdYsbQ/socket GNOME_KEYRING_PID=16304
test@Merlin:~> export GNOME_KEYRING_SOCKET=/tmp/keyring-qdYsbQ/socket test@Merlin:~> export GNOME_KEYRING_PID=16304
Substitute your socket and pid info in the above commands
Then start evo from the command line and away you go"
Then this:
so this sounds like a future FAQ for folks using evo under KDE then. :-/ feel free to close as NOTABUG, or to add a workaround for KDE people in SuSE (wasn't the whole game about making the use of computers easier? ;-) , or to reassign to gnome-keyring-manager or whatever... :-)
Problem is, the workaround only workas as long as you don't reboot. I turn off my computer every work day to save electricity, so this workaround is only a short term solution. Is Novell going to fix this or does anyone else have a solution so you don't have to do this work around evertime you start your computer? If there is no permanent fix, guess I will have to migrate to KMail.
There is a permanent way around this. There is a package available called, pam_keyring. It is available at:
http://ftp.gwdg.de/pub/opensuse/distribution/10.2/repo/oss/suse/i586/pam_key...
The description of the package says:
pam_keyring is a pam module that launches the gnome-keyring-daemon then tries to unlock a keyring using your login password.
One other change I had to make... I had to change my displaymanager from kdm to gdm (I use kde). Now, when I login using gdm, the gnome-keyring-daemon is automatically started up and the environment is setup properly. I can now start evolution simply by clicking on it. The keyring is already unlocked simply by logging in.
It works great. Rick
Do not have gdm as an option for the display manager. Art -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday 11 December 2006 20:57, Art Fore said:
I have a problem with evolution where everytine it goes out to check email or send email, it asks for the the password eventhough I have the remember password box checked. I sent a but report to Ximian and got the following back.
so this sounds like a future FAQ for folks using evo under KDE then. :-/ feel free to close as NOTABUG, or to add a workaround for KDE people in SuSE (wasn't the whole game about making the use of computers easier? ;-) , or to reassign to gnome-keyring-manager or whatever... :-)
What was the bug report #? I couldn't find it in b.n.c under your email address. I've been pushing for better interop and the "not-starting-gnome-keyring-thingy-outside-gnome" issue was supposed to be fixed, but I have just checked with 10.2 and I see that it isn't :@. But we have a window of time now where we could do something about it. For a permanent workaround, put this in a file $HOME/bin/my-evolution: " eval `gnome-keyring-daemon` evolution " Then edit the KDE menu entry for evolution so that it launches $HOME/bin/my-evolution instead of evolution. Will -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Tue, 2006-12-12 at 09:42 +0100, Will Stephenson wrote:
On Monday 11 December 2006 20:57, Art Fore said:
I have a problem with evolution where everytine it goes out to check email or send email, it asks for the the password eventhough I have the remember password box checked. I sent a but report to Ximian and got the following back.
so this sounds like a future FAQ for folks using evo under KDE then. :-/ feel free to close as NOTABUG, or to add a workaround for KDE people in SuSE (wasn't the whole game about making the use of computers easier? ;-) , or to reassign to gnome-keyring-manager or whatever... :-)
What was the bug report #? I couldn't find it in b.n.c under your email address.
I've been pushing for better interop and the "not-starting-gnome-keyring-thingy-outside-gnome" issue was supposed to be fixed, but I have just checked with 10.2 and I see that it isn't :@. But we have a window of time now where we could do something about it.
For a permanent workaround, put this in a file $HOME/bin/my-evolution: " eval `gnome-keyring-daemon` evolution "
Then edit the KDE menu entry for evolution so that it launches $HOME/bin/my-evolution instead of evolution.
Will
Bug report was 384237 which was marked as a duplicate of 383861. I will try what you suggested. Art -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Tue, 2006-12-12 at 09:42 +0100, Will Stephenson wrote:
On Monday 11 December 2006 20:57, Art Fore said:
I have a problem with evolution where everytine it goes out to check email or send email, it asks for the the password eventhough I have the remember password box checked. I sent a but report to Ximian and got the following back.
so this sounds like a future FAQ for folks using evo under KDE then. :-/ feel free to close as NOTABUG, or to add a workaround for KDE people in SuSE (wasn't the whole game about making the use of computers easier? ;-) , or to reassign to gnome-keyring-manager or whatever... :-)
What was the bug report #? I couldn't find it in b.n.c under your email address.
I've been pushing for better interop and the "not-starting-gnome-keyring-thingy-outside-gnome" issue was supposed to be fixed, but I have just checked with 10.2 and I see that it isn't :@. But we have a window of time now where we could do something about it.
For a permanent workaround, put this in a file $HOME/bin/my-evolution: " eval `gnome-keyring-daemon` evolution "
Then edit the KDE menu entry for evolution so that it launches $HOME/bin/my-evolution instead of evolution.
Will
Tried your suggestion. Put a file in my /home/afore/bin directory both with and without the " marks, and changed the KDE menu. I get nothing. If I edit the shortcut on my kde panel, I then get KDEInit could not launch '/home/afore/bin/my-evolution'. Tried a number of variations, but nothing successful. Art -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Tue, 2006-12-12 at 21:14 +0800, Art Fore wrote:
On Tue, 2006-12-12 at 09:42 +0100, Will Stephenson wrote:
On Monday 11 December 2006 20:57, Art Fore said:
I have a problem with evolution where everytine it goes out to check email or send email, it asks for the the password eventhough I have the remember password box checked. I sent a but report to Ximian and got the following back.
so this sounds like a future FAQ for folks using evo under KDE then. :-/ feel free to close as NOTABUG, or to add a workaround for KDE people in SuSE (wasn't the whole game about making the use of computers easier? ;-) , or to reassign to gnome-keyring-manager or whatever... :-)
What was the bug report #? I couldn't find it in b.n.c under your email address.
I've been pushing for better interop and the "not-starting-gnome-keyring-thingy-outside-gnome" issue was supposed to be fixed, but I have just checked with 10.2 and I see that it isn't :@. But we have a window of time now where we could do something about it.
For a permanent workaround, put this in a file $HOME/bin/my-evolution: " eval `gnome-keyring-daemon` evolution "
Then edit the KDE menu entry for evolution so that it launches $HOME/bin/my-evolution instead of evolution.
Will
Tried your suggestion. Put a file in my /home/afore/bin directory both with and without the " marks, and changed the KDE menu. I get nothing. If I edit the shortcut on my kde panel, I then get
KDEInit could not launch '/home/afore/bin/my-evolution'.
Tried a number of variations, but nothing successful.
Remember to do this to the script: chmod a+x my-evolution I wonder why the original poster used 'eval' to run the command. Very odd. Perhaps you also need to have the very first line in the script be: #!/bin/sh Otherwise it may not get executed. -- Roger Oberholtzer OPQ Systems AB Ramböll Sverige AB Kapellgränd 7 P.O. Box 4205 SE-102 65 Stockholm, Sweden Tel: Int +46 8-615 60 20 Fax: Int +46 8-31 42 23 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Tue, 2006-12-12 at 14:33 +0100, Roger Oberholtzer wrote:
On Tue, 2006-12-12 at 21:14 +0800, Art Fore wrote:
On Tue, 2006-12-12 at 09:42 +0100, Will Stephenson wrote:
On Monday 11 December 2006 20:57, Art Fore said:
I have a problem with evolution where everytine it goes out to check email or send email, it asks for the the password eventhough I have the remember password box checked. I sent a but report to Ximian and got the following back.
so this sounds like a future FAQ for folks using evo under KDE then. :-/ feel free to close as NOTABUG, or to add a workaround for KDE people in SuSE (wasn't the whole game about making the use of computers easier? ;-) , or to reassign to gnome-keyring-manager or whatever... :-)
What was the bug report #? I couldn't find it in b.n.c under your email address.
I've been pushing for better interop and the "not-starting-gnome-keyring-thingy-outside-gnome" issue was supposed to be fixed, but I have just checked with 10.2 and I see that it isn't :@. But we have a window of time now where we could do something about it.
For a permanent workaround, put this in a file $HOME/bin/my-evolution: " eval `gnome-keyring-daemon` evolution "
Then edit the KDE menu entry for evolution so that it launches $HOME/bin/my-evolution instead of evolution.
Will
Tried your suggestion. Put a file in my /home/afore/bin directory both with and without the " marks, and changed the KDE menu. I get nothing. If I edit the shortcut on my kde panel, I then get
KDEInit could not launch '/home/afore/bin/my-evolution'.
Tried a number of variations, but nothing successful.
Remember to do this to the script:
chmod a+x my-evolution
I wonder why the original poster used 'eval' to run the command. Very odd. Perhaps you also need to have the very first line in the script be:
#!/bin/sh
Otherwise it may not get executed.
-- Roger Oberholtzer
OPQ Systems AB Ramböll Sverige AB Kapellgränd 7 P.O. Box 4205 SE-102 65 Stockholm, Sweden
Tel: Int +46 8-615 60 20 Fax: Int +46 8-31 42 23
The chmod fixed the execution, but it still always asks for password, even after entering it, then later on when it goes to get email again. The " marks make it take about 10 times longer for evolution to open though. Tried removing the eval, still same thing. Art -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Tuesday 12 December 2006 14:33, Roger Oberholtzer said:
chmod a+x my-evolution #!/bin/sh
I should have mentioned these myself - also gnome-keyring-daemon does not output export - dbus-start does, which I actually uses, so I forgot to add this. The script should be " #!/bin/bash `eval gnome-keyring-daemon` export GNOME_KEYRING_SOCKET export GNOME_KEYRING_PID "
I wonder why the original poster used 'eval' to run the command. Very odd. Perhaps you also need to have the very first line in the script be:
Because 'eval' evaluates the output of the command as if it was part of the script. Thus the GNOME_KEYRING_SOCKET, GNOME_KEYRING_PID assignments are evaluated, the variables are set, exported to the environment, and evolution can find the keyring daemon. You might of course end up with multiple daemons running if you start and stop evolution though. The solution agreed when I discussed this with the Ximian guys was to make gnome-keyring-daemon a dbus service instead of using its own socket and protocol so that an existing instance can be found, but I guess this is still a WIP. Another workaround is to start the daemon and export its variables to the global environment at the start of every x session; start the daemon as shown in $HOME/.xinitrc - however that's not something we want or need to activate by default. Maybe Evolution could do this for you on first run if it detects the daemon isn't running. BTW, kontact starts and stops kded for its keyring/wallet needs automatically. Will -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Tue, 2006-12-12 at 15:23 +0100, Will Stephenson wrote:
On Tuesday 12 December 2006 14:33, Roger Oberholtzer said:
chmod a+x my-evolution #!/bin/sh
I should have mentioned these myself - also gnome-keyring-daemon does not output export - dbus-start does, which I actually uses, so I forgot to add this. The script should be " #!/bin/bash `eval gnome-keyring-daemon` export GNOME_KEYRING_SOCKET export GNOME_KEYRING_PID "
I wonder why the original poster used 'eval' to run the command. Very odd. Perhaps you also need to have the very first line in the script be:
Because 'eval' evaluates the output of the command as if it was part of the script. Thus the GNOME_KEYRING_SOCKET, GNOME_KEYRING_PID assignments are evaluated, the variables are set, exported to the environment, and evolution can find the keyring daemon.
You might of course end up with multiple daemons running if you start and stop evolution though. The solution agreed when I discussed this with the Ximian guys was to make gnome-keyring-daemon a dbus service instead of using its own socket and protocol so that an existing instance can be found, but I guess this is still a WIP.
Another workaround is to start the daemon and export its variables to the global environment at the start of every x session; start the daemon as shown in $HOME/.xinitrc - however that's not something we want or need to activate by default. Maybe Evolution could do this for you on first run if it detects the daemon isn't running.
BTW, kontact starts and stops kded for its keyring/wallet needs automatically.
Will
This did not even start the gnome-keyring-daemon. Here is my file #!/bin/sh eval 'gnome-keyring-daemon' export GNOME_KEYRING_SOCKET export GNOME_KEYRING_PID evolution As you can see, I only moved the '. Still did not work even though the daemon was started. Executed it from the command line and got a missing libgail-gnome. So I installed that. Now I get the following GNOME_KEYRING_SOCKET=/tmp/keyring-AjMN9C/socket GNOME_KEYRING_PID=8263 Bonobo accessibility support initialized GTK Accessibility Module initialized CalDAV Eplugin starting up ... ** (evolution-2.8:8264): DEBUG: mailto URL command: evolution %s ** (evolution-2.8:8264): DEBUG: mailto URL program: evolution (evolution-2.8:8264): Gtk-CRITICAL **: gtk_check_menu_item_set_active: assertion `GTK_IS_CHECK_MENU_ITEM (check_menu_item)' failed get art.fore pop://<email address> Find Items 2 Couldn't Get password 2 Remember pop://<email address>: 2/0 get art.fore pop://<email address> Find Items 2 Couldn't Get password 2 Remember pop://<email address>: 2/0 When I enter the password, it goes and gets the mail one time. Next time still have to enter the email address again. Seems to me this bandaid is really a bandaid that works depending on the time of day, temperature, and phase of the moon. Wished Novell would fix it pronto so one does not have to spend so much time to get something to work that should work out of the box. If this is the result of Novell's interoperability efforts, I don't think Microsoft has much to worry about. Art -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Tue, 2006-12-12 at 15:23 +0100, Will Stephenson wrote:
On Tuesday 12 December 2006 14:33, Roger Oberholtzer said:
chmod a+x my-evolution #!/bin/sh
I should have mentioned these myself - also gnome-keyring-daemon does not output export - dbus-start does, which I actually uses, so I forgot to add this. The script should be " #!/bin/bash `eval gnome-keyring-daemon` export GNOME_KEYRING_SOCKET export GNOME_KEYRING_PID "
I wonder why the original poster used 'eval' to run the command. Very odd. Perhaps you also need to have the very first line in the script be:
Because 'eval' evaluates the output of the command as if it was part of the script. Thus the GNOME_KEYRING_SOCKET, GNOME_KEYRING_PID assignments are evaluated, the variables are set, exported to the environment, and evolution can find the keyring daemon.
You might of course end up with multiple daemons running if you start and stop evolution though. The solution agreed when I discussed this with the Ximian guys was to make gnome-keyring-daemon a dbus service instead of using its own socket and protocol so that an existing instance can be found, but I guess this is still a WIP.
Another workaround is to start the daemon and export its variables to the global environment at the start of every x session; start the daemon as shown in $HOME/.xinitrc - however that's not something we want or need to activate by default. Maybe Evolution could do this for you on first run if it detects the daemon isn't running.
BTW, kontact starts and stops kded for its keyring/wallet needs automatically.
Will
This did not even start the gnome-keyring-daemon.
Here is my file
#!/bin/sh eval 'gnome-keyring-daemon' export GNOME_KEYRING_SOCKET export GNOME_KEYRING_PID evolution
As you can see, I only moved the '.
Still did not work even though the daemon was started. Executed it from the command line and got a missing libgail-gnome. So I installed that. Now I get the following
GNOME_KEYRING_SOCKET=/tmp/keyring-AjMN9C/socket GNOME_KEYRING_PID=8263 Bonobo accessibility support initialized GTK Accessibility Module initialized CalDAV Eplugin starting up ... ** (evolution-2.8:8264): DEBUG: mailto URL command: evolution %s ** (evolution-2.8:8264): DEBUG: mailto URL program: evolution
(evolution-2.8:8264): Gtk-CRITICAL **: gtk_check_menu_item_set_active: assertion `GTK_IS_CHECK_MENU_ITEM (check_menu_item)' failed get art.fore pop://<email address> Find Items 2 Couldn't Get password 2 Remember pop://<email address>: 2/0 get art.fore pop://<email address> Find Items 2 Couldn't Get password 2 Remember pop://<email address>: 2/0
When I enter the password, it goes and gets the mail one time. Next time still have to enter the email address again.
Seems to me this bandaid is really a bandaid that works depending on the time of day, temperature, and phase of the moon. Wished Novell would fix it pronto so one does not have to spend so much time to get something to work that should work out of the box. If this is the result of Novell's interoperability efforts, I don't think Microsoft has much to worry about.
Art Sorry to answer my own email, but here is some additional info. Executing everthing from the command line gets this, and it works until
On Tue, 2006-12-12 at 23:24 +0800, Art Fore wrote: the session is closed. afore@linux-sfnr:~/bin> gnome-keyring-daemon GNOME_KEYRING_SOCKET=/tmp/keyring-6q8sYy/socket GNOME_KEYRING_PID=8416 afore@linux-sfnr:~/bin> export GNOME_KEYRING_SOCKET=/tmp/keyring-6q8sYy/socket afore@linux-sfnr:~/bin> export GNOME_KEYRING_PID=8416 afore@linux-sfnr:~/bin> evolution & [1] 8423 afore@linux-sfnr:~/bin> Bonobo accessibility support initialized GTK Accessibility Module initialized CalDAV Eplugin starting up ... ** (evolution-2.8:8423): DEBUG: mailto URL command: evolution %s ** (evolution-2.8:8423): DEBUG: mailto URL program: evolution (evolution-2.8:8423): Gtk-CRITICAL **: gtk_check_menu_item_set_active: assertion `GTK_IS_CHECK_MENU_ITEM (check_menu_item)' failed get art.fore pop://<email address> Find Items 0 get art.fore pop://<email address> Find Items 0 BBDB spinning up... (evolution-2.8:8423): e-data-server-DEBUG: Loading categories from "/home/afore/.evolution/categories.xml" (evolution-2.8:8423): e-data-server-DEBUG: Loaded 29 categories -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Le mardi 12 décembre 2006 00:42, Will Stephenson a écrit :
On Monday 11 December 2006 20:57, Art Fore said:
I have a problem with evolution where everytine it goes out to check email or send email, it asks for the the password eventhough I have the remember password box checked. I sent a but report to Ximian and got the following back.
so this sounds like a future FAQ for folks using evo under KDE then. :-/ feel free to close as NOTABUG, or to add a workaround for KDE people in SuSE (wasn't the whole game about making the use of computers easier? ;-) , or to reassign to gnome-keyring-manager or whatever... :-)
What was the bug report #? I couldn't find it in b.n.c under your email address.
I've been pushing for better interop and the "not-starting-gnome-keyring-thingy-outside-gnome" issue was supposed to be fixed, but I have just checked with 10.2 and I see that it isn't :@. But we have a window of time now where we could do something about it.
For a permanent workaround, put this in a file $HOME/bin/my-evolution: " eval `gnome-keyring-daemon` evolution "
Then edit the KDE menu entry for evolution so that it launches $HOME/bin/my-evolution instead of evolution.
Will
Well, another workaround would be to recompile evolution-data-server with "--enable-gnome-keyring=no". -- Gruß Andreas -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
* Art Fore
On Tue, 2006-12-12 at 15:23 +0100, Will Stephenson wrote:
The script should be " #!/bin/bash `eval gnome-keyring-daemon` export GNOME_KEYRING_SOCKET export GNOME_KEYRING_PID "
This did not even start the gnome-keyring-daemon.
Here is my file
#!/bin/sh eval 'gnome-keyring-daemon' export GNOME_KEYRING_SOCKET export GNOME_KEYRING_PID evolution
As you can see, I only moved the '.
Your problem may be that you have not exercised the script as provided. The second line contains back-tics, not single quotes. Try it properly written and see if it works. Please, is it really necessary to _completely_ quote *everything* written previous? -- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/gallery2 OpenSUSE Linux http://en.opensuse.org/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Here is my file
#!/bin/sh eval 'gnome-keyring-daemon' export GNOME_KEYRING_SOCKET export GNOME_KEYRING_PID evolution
As you can see, I only moved the '.
Your problem may be that you have not exercised the script as provided. The second line contains back-tics, not single quotes. Try it properly written and see if it works.
Please, is it really necessary to _completely_ quote *everything* written previous? -- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/gallery2 OpenSUSE Linux http://en.opensuse.org/
"The second line contains back-tics, not single quotes" This is a new one on me. What are "back-tics" and how do you get them from a US Keyboard? Art -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Thu, 2006-12-14 at 20:24 +0800, Art Fore wrote:
Here is my file
#!/bin/sh eval 'gnome-keyring-daemon' export GNOME_KEYRING_SOCKET export GNOME_KEYRING_PID evolution
As you can see, I only moved the '.
Your problem may be that you have not exercised the script as provided. The second line contains back-tics, not single quotes. Try it properly written and see if it works.
Please, is it really necessary to _completely_ quote *everything* written previous?
"The second line contains back-tics, not single quotes" This is a new one on me. What are "back-tics" and how do you get them from a US Keyboard?
Just to the left of the 1 (one) key. -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Art Fore wrote:
This is a new one on me. What are "back-tics" and how do you get them from a US Keyboard? On my keyboard it is just to the left of the number 1 key.
Damon Register -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Art Fore wrote:
This is a new one on me. What are "back-tics" and how do you get them from a US Keyboard? On my keyboard it is just to the left of the number 1 key.
Damon Register OK,found it and tried the script as stated, but then evolution locked up. A short term solution from another thread somewhere is to uncheck
On Thu, 2006-12-14 at 07:34 -0500, Damon Register wrote: the remember password boxes using default evolution menu item. You login one time, then it is OK until leave evolution and go back in, then have to do it all over again. If Novell can't get interoperation between Gnome and KDE with Evolution right, how are they ever going to get any interoperation with Microsoft right? Will give it a couple of more weeks for a permanent solution, then if one is not forthcoming, will move to kmail. Art -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Thu, 2006-12-14 at 20:55 +0800, Art Fore wrote:
Art Fore wrote:
This is a new one on me. What are "back-tics" and how do you get them from a US Keyboard? On my keyboard it is just to the left of the number 1 key.
Damon Register OK,found it and tried the script as stated, but then evolution locked up. A short term solution from another thread somewhere is to uncheck
On Thu, 2006-12-14 at 07:34 -0500, Damon Register wrote: the remember password boxes using default evolution menu item. You login one time, then it is OK until leave evolution and go back in, then have to do it all over again.
If Novell can't get interoperation between Gnome and KDE with Evolution right, how are they ever going to get any interoperation with Microsoft right? Will give it a couple of more weeks for a permanent solution, then if one is not forthcoming, will move to kmail.
Art
Since we are the topic of evolution... If there is no fix forthcoming is there an easy way to move the mail from evolution to Kmail? I will need to do this as well if a fix is not available. -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Am Dienstag, den 12.12.2006, 03:57 +0800 schrieb Art Fore:
Problem is, the workaround only workas as long as you don't reboot. I turn off my computer every work day to save electricity, so this workaround is only a short term solution. Is Novell going to fix this or does anyone else have a solution so you don't have to do this work around evertime you start your computer? If there is no permanent fix, guess I will have to migrate to KMail.
i solved it by compiling evolution by myself. i downloaded it from http://www.gnome.org/projects/evolution/download.shtml i installed kerberos and openldap and all that needed stuff from dvd. i updated nss and nspr from: http://ftp.gwdg.de/linux/suse/opensuse/repositories/mozilla/openSUSE_10.2/ i configured evolution-data-server-1.8.2 with: ./configure --enable-static --enable-shared --enable-nss=yes --enable-smime=yes --enable-gnome-keyring=no --enable-ipv6=yes --enable-nntp=yes --with-libiconv --with-krb5=/usr/lib --with-openldap=/usr/lib --with-nspr-i ncludes=/usr/include/nspr4 --with-nss-includes=/usr/include/nss3 and the VERY IMPORTANT switch here is: "--enable-gnome-keyring=no"!!!!!!! i configured evolution 2.8.2.1 with: ./configure --enable-static --enable-shared --enable-nntp --enable-nss=yes --enable-smime=yes --enable-exchange --with-libiconv --enable-gtk-doc --with-openldap=/usr/lib --with-krb5=/usr/lib --with-nspr-includes=/usr/ include/nspr4 --with-nss-includes=/usr/include/nss3 i configured evolution-exchange-2.8.2 with: ./configure --with-openldap=/usr/lib -- einen schönen Tag noch DI Rainer Klier Abteilung IT - Entwicklung ECOLOG Logistiksysteme GmbH Bauernstraße 11, A-4600 Wels Tel. ++43/7242/66200 Fax ++43/7242/66200-200 mailto:kra@ecolog.at http://www.ecolog.at -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Am Dienstag, den 12.12.2006, 18:34 +0100 schrieb Andreas:
Well, another workaround would be to recompile evolution-data-server with "--enable-gnome-keyring=no".
i solved it by compiling evolution by myself. i downloaded it from http://www.gnome.org/projects/evolution/download.shtml i installed kerberos and openldap and all that needed stuff from dvd. i updated nss and nspr from: http://ftp.gwdg.de/linux/suse/opensuse/repositories/mozilla/openSUSE_10.2/ i configured evolution-data-server-1.8.2 with: ./configure --enable-static --enable-shared --enable-nss=yes --enable-smime=yes --enable-gnome-keyring=no --enable-ipv6=yes --enable-nntp=yes --with-libiconv --with-krb5=/usr/lib --with-openldap=/usr/lib --with-nspr-i ncludes=/usr/include/nspr4 --with-nss-includes=/usr/include/nss3 and the VERY IMPORTANT switch here is: "--enable-gnome-keyring=no"!!!!!!! i configured evolution 2.8.2.1 with: ./configure --enable-static --enable-shared --enable-nntp --enable-nss=yes --enable-smime=yes --enable-exchange --with-libiconv --enable-gtk-doc --with-openldap=/usr/lib --with-krb5=/usr/lib --with-nspr-includes=/usr/ include/nspr4 --with-nss-includes=/usr/include/nss3 i configured evolution-exchange-2.8.2 with: ./configure --with-openldap=/usr/lib -- einen schönen Tag noch DI Rainer Klier Abteilung IT - Entwicklung ECOLOG Logistiksysteme GmbH Bauernstraße 11, A-4600 Wels Tel. ++43/7242/66200 Fax ++43/7242/66200-200 mailto:kra@ecolog.at http://www.ecolog.at -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Thu, 2006-12-14 at 21:30 +0100, Rainer Klier wrote:
Am Dienstag, den 12.12.2006, 18:34 +0100 schrieb Andreas:
Well, another workaround would be to recompile evolution-data-server with "--enable-gnome-keyring=no".
i solved it by compiling evolution by myself. i downloaded it from http://www.gnome.org/projects/evolution/download.shtml
i installed kerberos and openldap and all that needed stuff from dvd. i updated nss and nspr from: http://ftp.gwdg.de/linux/suse/opensuse/repositories/mozilla/openSUSE_10.2/
i configured evolution-data-server-1.8.2 with: ./configure --enable-static --enable-shared --enable-nss=yes --enable-smime=yes --enable-gnome-keyring=no --enable-ipv6=yes --enable-nntp=yes --with-libiconv --with-krb5=/usr/lib --with-openldap=/usr/lib --with-nspr-i ncludes=/usr/include/nspr4 --with-nss-includes=/usr/include/nss3
and the VERY IMPORTANT switch here is: "--enable-gnome-keyring=no"!!!!!!!
i configured evolution 2.8.2.1 with: ./configure --enable-static --enable-shared --enable-nntp --enable-nss=yes --enable-smime=yes --enable-exchange --with-libiconv --enable-gtk-doc --with-openldap=/usr/lib --with-krb5=/usr/lib --with-nspr-includes=/usr/ include/nspr4 --with-nss-includes=/usr/include/nss3
i configured evolution-exchange-2.8.2 with: ./configure --with-openldap=/usr/lib
Thanks for sharing this info. I was able to configure evolution-dat-server OK, but configuring evolution terminates with: -- checking for CAMEL... configure: error: Package requirements (camel-provider-1.2) were not met: No package 'camel-provider-1.2' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables CAMEL_CFLAGS and CAMEL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. I have an unmodified test install of 10.2 x86_64. Do you have any thoughts on why we get different results? TIA Dave -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Le jeudi 14 décembre 2006 20:12, Dave Barton a écrit :
Thanks for sharing this info. I was able to configure evolution-dat-server OK, but configuring evolution terminates with:
-- checking for CAMEL... configure: error: Package requirements (camel-provider-1.2) were not met:
No package 'camel-provider-1.2' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.
Alternatively, you may set the environment variables CAMEL_CFLAGS and CAMEL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
I have an unmodified test install of 10.2 x86_64. Do you have any thoughts on why we get different results?
TIA
Dave
AFAIK a re-compilation of evolution itself is not necessary anyway. After I looked at the specfile for evolution-data-server I decided to forget about downloading & installing an upstream version. Instead I simply changed the specfile (the one option about the keyrings) and rebuilt the rpm with the new specfile. -- Gruß & Happy Holidays Andreas -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Am Freitag, den 15.12.2006, 08:57 -0800 schrieb Andreas:
Le jeudi 14 décembre 2006 20:12, Dave Barton a écrit :
AFAIK a re-compilation of evolution itself is not necessary anyway. After I looked at the specfile for evolution-data-server I decided to forget about downloading & installing an upstream version. Instead I simply changed the specfile (the one option about the keyrings) and rebuilt the rpm with the new specfile.
this is a very good idea! but where did you get the spec-file? is it part of the source-rpm? -- einen schönen Tag noch DI Rainer Klier Abteilung IT - Entwicklung ECOLOG Logistiksysteme GmbH Bauernstraße 11, A-4600 Wels Tel. ++43/7242/66200 Fax ++43/7242/66200-200 mailto:kra@ecolog.at http://www.ecolog.at -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Le lundi 18 décembre 2006 00:18, Rainer Klier a écrit :
but where did you get the spec-file? is it part of the source-rpm?
yep. it is in the source rpm. What I do usually when I want to change a detail about an rpm is: - download source rpm - execute rpmbuild --rebuild <name-of-source-rpm> in the download-folder - install all the dependencies (the rpmbuild --rebuild shows an error message if dependencies are missing) - cd into /usr/src/packages/SPECS - edit the *.spec file with a simple texteditor - execute rpmbuild -ba <name-of-the-specfile> - hope that everything builds without an error message ;) - install the new rpms from /usr/src/packages/RPMS/i586. That is - very simplified - how every rpm is built. If you want to know more about rpms, specfiles and rpmbuild, have a look at the manpages and at http://www.rpm.org/RPM-HOWTO/ -- Gruß & Happy Holidays Andreas -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Am Montag, den 18.12.2006, 03:04 -0800 schrieb Andreas:
Le lundi 18 décembre 2006 00:18, Rainer Klier a écrit :
but where did you get the spec-file? is it part of the source-rpm?
yep. it is in the source rpm.
That is - very simplified - how every rpm is built.
this sounds like a very interesting alternative for me. this is a really very good idea to make a "private" self-compiled "special" version of a software which is shipped from distributor. -- einen schönen Tag noch DI Rainer Klier Abteilung IT - Entwicklung ECOLOG Logistiksysteme GmbH Bauernstraße 11, A-4600 Wels Tel. ++43/7242/66200 Fax ++43/7242/66200-200 mailto:kra@ecolog.at http://www.ecolog.at -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (10)
-
Andreas -
Art Fore -
Damon Register -
Dave Barton -
Kenneth Schneider -
Patrick Shanahan -
Rainer Klier -
Rick Friedman -
Roger Oberholtzer -
Will Stephenson