I had a UPS failure yesterday. Now when I start KDE, the fontsize is about one pixel--enough to see it's there, but not enough to make out with a magnifying glass. I looked at XF86Config, but nothing seemed to be amiss there. The rest of the logon screen looks okay, making adjustments for the lack of space consumed by the text. And when I run VNC from a remote machine, that display looks normal. Where should I look for the cause of this? -- Daryl Lee Open the present--it's a gift.
On Wednesday 07 July 2004 20:21, Daryl Lee wrote:
I had a UPS failure yesterday. Now when I start KDE, the fontsize is about one pixel--enough to see it's there, but not enough to make out with a magnifying glass. I looked at XF86Config, but nothing seemed to be amiss there. The rest of the logon screen looks okay, making adjustments for the lack of space consumed by the text. And when I run VNC from a remote machine, that display looks normal. Where should I look for the cause of this?
Mice fonts. Nice name :-) AFAIK go to: Control centre->Appearance and themes->Fonts
-- Daryl Lee Open the present--it's a gift.
Al
* Daryl Lee
I had a UPS failure yesterday. Now when I start KDE, the fontsize is about one pixel--enough to see it's there, but not enough to make out with a magnifying glass. I looked at XF86Config, but nothing seemed to be amiss there. The rest of the logon screen looks okay, making adjustments for the lack of space consumed by the text. And when I run VNC from a remote machine, that display looks normal. Where should I look for the cause of this?
Just a guess, but did you look at /var/log/messages? Look for the time immediately before the power outage and after your system recovery. -- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/photos
On Wed, Jul 07, 2004 at 08:27:22PM +0200, Alex wrote:
On Wednesday 07 July 2004 20:21, Daryl Lee wrote:
I had a UPS failure yesterday. Now when I start KDE, the fontsize is about one pixel--enough to see it's there, but not enough to make out with a magnifying glass. I looked at XF86Config, but nothing seemed to be amiss there. The rest of the logon screen looks okay, making adjustments for the lack of space consumed by the text. And when I run VNC from a remote machine, that display looks normal. Where should I look for the cause of this?
Mice fonts. Nice name :-)
AFAIK go to: Control centre->Appearance and themes->Fonts
And will there be text there for me to read? I can't even read the text on the login screen. I'm kinda limited to text consoles. As for the recommendation to check log files. I have nothing from the time of the failure. I suppose there was no time to clean up.
-- Daryl Lee Open the present--it's a gift.
Al
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
-- Daryl Lee Open the present--it's a gift.
On Wednesday 07 July 2004 20:27, Alex wrote:
On Wednesday 07 July 2004 20:21, Daryl Lee wrote:
I had a UPS failure yesterday. Now when I start KDE, the fontsize is about one pixel--enough to see it's there, but not enough to make out with a magnifying glass. I looked at XF86Config, but nothing seemed to be amiss there. The rest of the logon screen looks okay, making adjustments for the lack of space consumed by the text. And when I run VNC from a remote machine, that display looks normal. Where should I look for the cause of this?
Mice fonts. Nice name :-)
AFAIK go to: Control centre->Appearance and themes->Fonts
-- Daryl Lee Open the present--it's a gift.
Al
Open in an editor: ~/.kderc (~ means your home directory). Change the size of the font. Ex: StandartFont = Sans Serif,12,-1,5,....... The first value behind the font-type is the heigh. I sent you my .kderc, so if you want, you have to copy it in your home directory to replace the other. But try first to change values in the other one. Hope to help you Al
On Wednesday 07 July 2004 11:21, Daryl Lee wrote:
I had a UPS failure yesterday. Now when I start KDE, the fontsize is about one pixel--enough to see it's there, but not enough to make out with a magnifying glass. I looked at XF86Config, but nothing seemed to be amiss there. The rest of the logon screen looks okay, making adjustments for the lack of space consumed by the text. And when I run VNC from a remote machine, that display looks normal. Where should I look for the cause of this?
I've got the same issue 1px high fonts but mine is with GNOME not KDE.. KDE is fine. -Jason
Is there a global equivalent? This problem shows up at the login screen--it doesn't know yet which .kderc to look at, since no one has logged in. On Thu, Jul 08, 2004 at 10:14:30AM +0200, Alex wrote:
On Wednesday 07 July 2004 20:27, Alex wrote:
On Wednesday 07 July 2004 20:21, Daryl Lee wrote:
I had a UPS failure yesterday. Now when I start KDE, the fontsize is about one pixel--enough to see it's there, but not enough to make out with a magnifying glass. I looked at XF86Config, but nothing seemed to be amiss there. The rest of the logon screen looks okay, making adjustments for the lack of space consumed by the text. And when I run VNC from a remote machine, that display looks normal. Where should I look for the cause of this?
Mice fonts. Nice name :-)
AFAIK go to: Control centre->Appearance and themes->Fonts
-- Daryl Lee Open the present--it's a gift.
Al
Open in an editor: ~/.kderc (~ means your home directory).
Change the size of the font. Ex: StandartFont = Sans Serif,12,-1,5,.......
The first value behind the font-type is the heigh. I sent you my .kderc, so if you want, you have to copy it in your home directory to replace the other. But try first to change values in the other one.
Hope to help you
Al
[General] StandardFont=Sans Serif,12,-1,5,50,0,0,0,0,0 activeFont=Sans Serif,11,-1,5,74,0,0,0,0,0 fixed=courier,10,-1,5,50,0,0,0,0,0 font=Sans Serif,10,-1,5,50,0,0,0,0,0 menuFont=Sans Serif,10,-1,5,50,0,0,0,0,0 taskbarFont=Sans Serif,10,-1,0,50,0,0,0,0,0 toolBarFont=Sans Serif,10,-1,5,50,0,0,0,0,0
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
-- Daryl Lee Open the present--it's a gift.
Any chance that removing the "font" RPMs and reinstalling them would help? Steve -----Original Message----- From: Daryl Lee [mailto:dlee@altaregos.com] Sent: Friday, July 09, 2004 6:54 AM To: Alex Cc: suse-linux-e@suse.com Subject: Re: [SLE] Mice font Is there a global equivalent? This problem shows up at the login screen--it doesn't know yet which .kderc to look at, since no one has logged in. On Thu, Jul 08, 2004 at 10:14:30AM +0200, Alex wrote:
On Wednesday 07 July 2004 20:27, Alex wrote:
On Wednesday 07 July 2004 20:21, Daryl Lee wrote:
I had a UPS failure yesterday. Now when I start KDE, the fontsize is about one pixel--enough to see it's there, but not enough to make out with a magnifying glass. I looked at XF86Config, but nothing seemed to be amiss there. The rest of the logon screen looks okay, making adjustments for the lack of space consumed by the text. And when I run VNC from a remote machine, that display looks normal. Where should I look for the cause of this?
Mice fonts. Nice name :-)
AFAIK go to: Control centre->Appearance and themes->Fonts
-- Daryl Lee Open the present--it's a gift.
Al
Open in an editor: ~/.kderc (~ means your home directory).
Change the size of the font. Ex: StandartFont = Sans Serif,12,-1,5,.......
The first value behind the font-type is the heigh. I sent you my .kderc, so if you want, you have to copy it in your home directory to replace the other. But try first to change values in the other one.
Hope to help you
Al
[General] StandardFont=Sans Serif,12,-1,5,50,0,0,0,0,0 activeFont=Sans Serif,11,-1,5,74,0,0,0,0,0 fixed=courier,10,-1,5,50,0,0,0,0,0 font=Sans Serif,10,-1,5,50,0,0,0,0,0 menuFont=Sans Serif,10,-1,5,50,0,0,0,0,0 taskbarFont=Sans Serif,10,-1,0,50,0,0,0,0,0 toolBarFont=Sans Serif,10,-1,5,50,0,0,0,0,0
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
-- Daryl Lee Open the present--it's a gift. -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
It seems someone else in this list was having a similar problem, and one recommendation was to re-run SAX2. That rang a small chime in my head, and so I did, and that cleared the problem right up. Thanks to all for your suggestions. On Fri, Jul 09, 2004 at 08:29:08AM -0500, Steve Kratz wrote:
Any chance that removing the "font" RPMs and reinstalling them would help?
Steve
-----Original Message----- From: Daryl Lee [mailto:dlee@altaregos.com] Sent: Friday, July 09, 2004 6:54 AM To: Alex Cc: suse-linux-e@suse.com Subject: Re: [SLE] Mice font
Is there a global equivalent? This problem shows up at the login screen--it doesn't know yet which .kderc to look at, since no one has logged in.
On Thu, Jul 08, 2004 at 10:14:30AM +0200, Alex wrote:
On Wednesday 07 July 2004 20:27, Alex wrote:
On Wednesday 07 July 2004 20:21, Daryl Lee wrote:
I had a UPS failure yesterday. Now when I start KDE, the fontsize is about one pixel--enough to see it's there, but not enough to make out with a magnifying glass. I looked at XF86Config, but nothing seemed to be amiss there. The rest of the logon screen looks okay, making adjustments for the lack of space consumed by the text. And when I run VNC from a remote machine, that display looks normal. Where should I look for the cause of this?
Mice fonts. Nice name :-)
AFAIK go to: Control centre->Appearance and themes->Fonts
-- Daryl Lee Open the present--it's a gift.
Al
Open in an editor: ~/.kderc (~ means your home directory).
Change the size of the font. Ex: StandartFont = Sans Serif,12,-1,5,.......
The first value behind the font-type is the heigh. I sent you my .kderc, so if you want, you have to copy it in your home directory to replace the other. But try first to change values in the other one.
Hope to help you
Al
[General] StandardFont=Sans Serif,12,-1,5,50,0,0,0,0,0 activeFont=Sans Serif,11,-1,5,74,0,0,0,0,0 fixed=courier,10,-1,5,50,0,0,0,0,0 font=Sans Serif,10,-1,5,50,0,0,0,0,0 menuFont=Sans Serif,10,-1,5,50,0,0,0,0,0 taskbarFont=Sans Serif,10,-1,0,50,0,0,0,0,0 toolBarFont=Sans Serif,10,-1,5,50,0,0,0,0,0
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
-- Daryl Lee Open the present--it's a gift.
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
-- Daryl Lee Open the present--it's a gift.
On Friday 09 July 2004 21:08, Daryl Lee wrote:
It seems someone else in this list was having a similar problem, and one recommendation was to re-run SAX2. That rang a small chime in my head, and so I did, and that cleared the problem right up. Thanks to all for your suggestions.
What did you do in SAX2 to fix the problem and will this also fix GNOME? The 1px fonts i'm having problems with are in GNOME. KDE is good. Jason
participants (5)
-
Alex -
Daryl Lee -
Patrick Shanahan -
Steve Kratz -
themadtux