[opensuse] Configure nic card on 2 vlans on boot
Hello, I configured my nic card to be 2 seperate vlans with vconfig so now that card is connected to vlan 1 and vlan 2 but the problem is i don't know how to configure suse's nic settings in /etc/sysconfig/network/ifcfg* to automatically configure the nic on both vlans on boot. Is this possible? Anyone have any examples? Thanks, Jake -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Jake Conk wrote:
Hello,
I configured my nic card to be 2 seperate vlans with vconfig so now that card is connected to vlan 1 and vlan 2 but the problem is i don't know how to configure suse's nic settings in /etc/sysconfig/network/ifcfg* to automatically configure the nic on both vlans on boot.
Is this possible? Anyone have any examples?
Just set up each card in YaST.
Thanks, Jake
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
I don't see any features in YaST that will let me configure the card
to be on separate vlans. I'm using the standard way of configuration,
am I not seeing something there to configure vlans with YaST?
Thanks,
- Jake
On Nov 23, 2007 8:57 PM, Aaron Kulkis
Jake Conk wrote:
Hello,
I configured my nic card to be 2 seperate vlans with vconfig so now that card is connected to vlan 1 and vlan 2 but the problem is i don't know how to configure suse's nic settings in /etc/sysconfig/network/ifcfg* to automatically configure the nic on both vlans on boot.
Is this possible? Anyone have any examples?
Just set up each card in YaST.
Thanks, Jake
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Jake Conk wrote:
I don't see any features in YaST that will let me configure the card to be on separate vlans. I'm using the standard way of configuration, am I not seeing something there to configure vlans with YaST?
I think you're a bit confused here. A VLAN is configured in a switch, so that some ports belong to one VLAN or another. The packets are tagged, so that other switches can recognize which VLAN is the destination. I don't believe you can do that in Yast. What it does support, is multiple IP addresses, so that a NIC can be in different sub nets on the same physical network. Is that what you're referring to? -- Use OpenOffice.org http://www.openoffice.org -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sat, 24 Nov, 2007 at 17:57:47 -0500, James Knott wrote:
Jake Conk wrote:
I don't see any features in YaST that will let me configure the card to be on separate vlans. I'm using the standard way of configuration, am I not seeing something there to configure vlans with YaST?
I think you're a bit confused here.
Not really.
A VLAN is configured in a switch, so that some ports belong to one VLAN or another. The packets are tagged, so that other switches can recognize which VLAN is the destination.
Indeed. However it's perfectly possible to set up a jumbo-frame capable NIC with vlans under linux, using vconfig. Doing it manually does have a rather steep learning curve though. I spent some time tinkering with it a couple of years ago, and I did eventually get a test setup working. Sadly I've all but completely forgotten the hows and whys. What the OP is asking about is how to do it through YaST.
I don't believe you can do that in Yast.
Me neither, but it *would* be a nice addition.
What it does support, is multiple IP addresses, so that a NIC can be in different sub nets on the same physical network. Is that what you're referring to?
No. That's something else. /jon -- YMMV -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Saturday 24 November 2007 12:52:25 am Jake Conk wrote:
Hello,
I configured my nic card to be 2 seperate vlans with vconfig so now that card is connected to vlan 1 and vlan 2 but the problem is i don't know how to configure suse's nic settings in /etc/sysconfig/network/ifcfg* to automatically configure the nic on both vlans on boot.
Is this possible? Anyone have any examples?
Thanks, Jake
I think you just have to create separate file for vlan named as ifcfg-vlan#. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (5)
-
Aaron Kulkis
-
Jake Conk
-
James Knott
-
Jon Clausen
-
Shuai