SuSE 9.1 Pro on Dell PowerEdge 2550, anyone got it working?
I've recently upgraded from SuSE 8.1 Pro to SuSE 9.1 Pro via a fresh install and am having big problems. I'm running a Dell PowerEdge 2550 with an integrated Adaptec Ultra3 AIC-7899, IBM Ulstrastar Ultra320 73 GB drive, and kernel was latest via YaST of 2.6.5.7-104-default. This is the same setup I've used for a long, long time with no problems under 8.1 Pro. At what seems to be completely random times I get tons of I/O errors and the machine completely ceases to function. I have syslog turned all the way up but nothing gets logged to syslog. Ocassionally I get to tty10 quickly enough to see: aic7xxx_abort returns 0x2000 SCSI error : <0 0 0 0 return code = 0x6000000 end_request: I/O error, dev sda, sector "varies but most recently 81773499". I've tried mutiple known good drives but the same problem occurs so unless I've had mass hard drive failures across multiple systems all at once, I'm fairly certain it's not a hard drive problem. I was using the aic7xxx module. I noticed that there was also an aic7xxx_old module available via modprobe -l | grep -i aic7. If I used YaST to look at possible modules, it shows aic79xx and aic7xxx as suggestions although it wouldn't load aic79xx. I tried using kernel 2.6.8-4cvs20040818184351-default from SuSE's ftp site but still had the same problem. After this morning's crash I've replaced the aic7xxx module with aic7xxx_old. We'll see how that goes. Is anyone successfully using SuSE Linux Professional 9.1 on a Dell Poweredge 2550? Any ideas? Go back to 2.4 kernel based system?.... Also, any good way to get some logging on this? I have cron sending the output of dmesg and a few other things to a file every ten minutes to try and catch something but it hasn't worked so far with gibberish being appended to and corrupting the file at every crash. Thanks, Jason Joines =================================
I´m having a similar problem with a Dell 2650, but I have a PEdge 1600
that works fine. I tried a lot of things but I don´t have any more
ideas.
waiting for some help,
Diego.
On Mon, 23 Aug 2004 09:13:50 -0500, Jason Joines
I've recently upgraded from SuSE 8.1 Pro to SuSE 9.1 Pro via a fresh install and am having big problems. I'm running a Dell PowerEdge 2550 with an integrated Adaptec Ultra3 AIC-7899, IBM Ulstrastar Ultra320 73 GB drive, and kernel was latest via YaST of 2.6.5.7-104-default. This is the same setup I've used for a long, long time with no problems under 8.1 Pro.
At what seems to be completely random times I get tons of I/O errors and the machine completely ceases to function. I have syslog turned all the way up but nothing gets logged to syslog. Ocassionally I get to tty10 quickly enough to see: aic7xxx_abort returns 0x2000 SCSI error : <0 0 0 0 return code = 0x6000000 end_request: I/O error, dev sda, sector "varies but most recently 81773499".
I've tried mutiple known good drives but the same problem occurs so unless I've had mass hard drive failures across multiple systems all at once, I'm fairly certain it's not a hard drive problem. I was using the aic7xxx module. I noticed that there was also an aic7xxx_old module available via modprobe -l | grep -i aic7. If I used YaST to look at possible modules, it shows aic79xx and aic7xxx as suggestions although it wouldn't load aic79xx.
I tried using kernel 2.6.8-4cvs20040818184351-default from SuSE's ftp site but still had the same problem. After this morning's crash I've replaced the aic7xxx module with aic7xxx_old. We'll see how that goes. Is anyone successfully using SuSE Linux Professional 9.1 on a Dell Poweredge 2550? Any ideas? Go back to 2.4 kernel based system?....
Also, any good way to get some logging on this? I have cron sending the output of dmesg and a few other things to a file every ten minutes to try and catch something but it hasn't worked so far with gibberish being appended to and corrupting the file at every crash.
Thanks,
Jason Joines =================================
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
On Mon, 23 Aug 2004 09:13:50 -0500, Jason Joines
I've recently upgraded from SuSE 8.1 Pro to SuSE 9.1 Pro via a fresh install and am having big problems. I'm running a Dell PowerEdge 2550 with an integrated Adaptec Ultra3 AIC-7899, IBM Ulstrastar Ultra320 73 GB drive, and kernel was latest via YaST of 2.6.5.7-104-default. This is the same setup I've used for a long, long time with no problems under 8.1 Pro.
At what seems to be completely random times I get tons of I/O errors and the machine completely ceases to function. I have syslog turned all the way up but nothing gets logged to syslog. Ocassionally I get to tty10 quickly enough to see: aic7xxx_abort returns 0x2000 SCSI error : <0 0 0 0 return code = 0x6000000 end_request: I/O error, dev sda, sector "varies but most recently 81773499".
I've tried mutiple known good drives but the same problem occurs so unless I've had mass hard drive failures across multiple systems all at once, I'm fairly certain it's not a hard drive problem. I was using the aic7xxx module. I noticed that there was also an aic7xxx_old module available via modprobe -l | grep -i aic7. If I used YaST to look at possible modules, it shows aic79xx and aic7xxx as suggestions although it wouldn't load aic79xx.
I tried using kernel 2.6.8-4cvs20040818184351-default from SuSE's ftp site but still had the same problem. After this morning's crash I've replaced the aic7xxx module with aic7xxx_old. We'll see how that goes. Is anyone successfully using SuSE Linux Professional 9.1 on a Dell Poweredge 2550? Any ideas? Go back to 2.4 kernel based system?....
Also, any good way to get some logging on this? I have cron sending the output of dmesg and a few other things to a file every ten minutes to try and catch something but it hasn't worked so far with gibberish being appended to and corrupting the file at every crash.
Thanks,
Jason Joines =================================
Diego Ramos wrote:
I´m having a similar problem with a Dell 2650, but I have a PEdge 1600 that works fine. I tried a lot of things but I don´t have any more ideas.
waiting for some help,
Diego.
Well, since loading the aic7xxx_old module instead of the aic7xxx the box has been up for 25 hours now, a new record. I found a bunch of posts to Dell mailing lists via Google. Seems they're having major problems with all 2.6 kernel distributions on just about all PowerEdge servers from the 1750 on up. Red Hat Enterprise, Debian, Mandrake and SuSE were all referenced. It sounded like Dell was supposed to release some firmware fix sometime this month but there was no official statement. Hopefully this aic7xxx_old will keep things going for now. Jason =================================
participants (2)
-
Diego Ramos -
Jason Joines