First time Network/Internet in need.
Howdy Just got hold of 9.0 Pro. As a test i installed it on my laptop 'Siemens Amilo'. Mother it's smooth :-) Put all my ISP numbers in and it eaven went and uppdated it self :-)) Started up browser an wiiii away wi go. With this luck i desided to put it on the main box to. Put the same ISP numbers in, NOTHING :-( I'v put them side by side and EVERY number is the same. Ping to loopback and card is OK. But gateway NADA. On startup log says 'SSH Deamon - Fail'. Othervise nothing to my blue eyes is wrong. But what du i know :-) This is my flrst encounter whith linux, so what wou'ld be the proper baby step from here. Thank's //Andy ----- AMD +2500 Barton / 760Mb Mem / Geforce FX 5600 / Gigabyte 7-NNXP - network on board. A lot of hd's - Linux on 12Gb - / = 5gig - /home = 6gig - Swap = 1gig. __________________________________________________________________ Anders Lundin ICQ#: 170143394 Current ICQ status: + More ways to contact me __________________________________________________________________
On Fri, 2003-11-21 at 04:41, Anders Lundin wrote:
Howdy Just got hold of 9.0 Pro. As a test i installed it on my laptop 'Siemens Amilo'. Mother it's smooth :-) Put all my ISP numbers in and it eaven went and uppdated it self :-)) Started up browser an wiiii away wi go. With this luck i desided to put it on the main box to. Put the same ISP numbers in, NOTHING :-( I'v put them side by side and EVERY number is the same. Ping to loopback and card is OK. But gateway NADA. On startup log says 'SSH Deamon - Fail'. Othervise nothing to my blue eyes is wrong. But what du i know :-) This is my flrst encounter whith linux, so what wou'ld be the proper baby step from here. Thank's //Andy
Is the network card working? As root type ifconfig . There should be a eth0 there. If not, then you may need to dig a little deeper as to why it is not there. But if you do see eth0, then I would try and ping the ip address that is on the adapter. Let us know what you find out. This should get you a good starting point. -- Marshall "Nothing is impossible, we just do not have all the answers to make the impossible, possible."
YaST --> Network Devices and check that everything is correctly set, IP address, route/gateway. ifconfig and route -n and /etc/resolv.conf will also tell you if you have all the pieces in place. Regards Sid. Anders Lundin wrote:
Howdy Just got hold of 9.0 Pro. As a test i installed it on my laptop 'Siemens Amilo'. Mother it's smooth :-) Put all my ISP numbers in and it eaven went and uppdated it self :-)) Started up browser an wiiii away wi go. With this luck i desided to put it on the main box to. Put the same ISP numbers in, NOTHING :-( I'v put them side by side and EVERY number is the same. Ping to loopback and card is OK. But gateway NADA. On startup log says 'SSH Deamon - Fail'. Othervise nothing to my blue eyes is wrong. But what du i know :-) This is my flrst encounter whith linux, so what wou'ld be the proper baby step from here. Thank's //Andy
----- AMD +2500 Barton / 760Mb Mem / Geforce FX 5600 / Gigabyte 7-NNXP - network on board. A lot of hd's - Linux on 12Gb - / = 5gig - /home = 6gig - Swap = 1gig.
__________________________________________________________________ Anders Lundin ICQ#: 170143394 Current ICQ status: + More ways to contact me __________________________________________________________________
-- Sid Boyce .... Linux Only Shop.
----- Original Message -----
From: "Marshall Heartley"
On Fri, 2003-11-21 at 04:41, Anders Lundin wrote:
Howdy Just got hold of 9.0 Pro. As a test i installed it on my laptop 'Siemens Amilo'. Mother it's smooth :-) Put all my ISP numbers in and it eaven went and uppdated it self :-)) Started up browser an wiiii away wi go. With this luck i desided to put it on the main box to. Put the same ISP numbers in, NOTHING :-( I'v put them side by side and EVERY number is the same. Ping to loopback and card is OK. But gateway NADA. On startup log says 'SSH Deamon - Fail'. Othervise nothing to my blue eyes is wrong. But what du i know :-) This is my flrst encounter whith linux, so what wou'ld be the proper baby step from here. Thank's //Andy
Is the network card working? As root type ifconfig . There should be a eth0 there. If not, then you may need to dig a little deeper as to why it is not there. But if you do see eth0, then I would try and ping the ip address that is on the adapter. Let us know what you find out.
This should get you a good starting point.
-- Marshall
Adress marked XXX for security reasons (or em i paranoid?). But the adresses are exactly the same as on the working laptop. And as i tríed to say in the previous message, ping the card is OK, ping the Loopback is OK, but gateway nada on the desktop. On the laptop the gateway pings ok too. Both running 9.0. When i boot up i see 'SHH Deamon = Fail' does that matter anything? all oter Done. When i get this to work i WILL get a spell checker :-) # ifconfig eth0 Link encap:Ethernet HWaddr 00:90:96:29:AB:A0 inet addr:XXX.XXX.XXX.XXX Bcast:XXX.XXX.XXX.XXX Mask:XXX.XXX.XXX.XXX inet6 addr: fe80::290:96ff:fe29:aba0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 Kb) TX bytes:0 (0.0 b) Interrupt:05 Base address:0x9800 Memory:e9000000-e9020000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:381 errors:0 dropped:0 overruns:0 frame:0 TX packets:381 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39232 (38.3 Kb) TX bytes:39232 (38.3 Kb) # route -n Kernel IP routing table Shows exatly the same as the laptop that works. # /etc/resolv.conf bash: /etc/resolv.conf: denied //Andy
participants (3)
-
Anders Lundin -
Marshall Heartley -
Sid Boyce