[SLE] -- Install Problem #1 -- 3c509 -- 9.1 Pro -- also Win98
The 3c509 network card is declared during system boot up to be "not yet active" and "no interface found". I followed the instructions in section 13.4 (Network Integration - Admin Guide) using YAST. Everything OK with the card operation in the rest of my session. However, when rebooting, again the same problem. I have done this many times and cannot figure out what YAST should have done in the way of file set up but didn't. [using inetd]
On Wednesday, 20 October 2004 11.52, Ted Hilts wrote:
The 3c509 network card is declared during system boot up to be "not yet active" and "no interface found". I followed the instructions in section 13.4 (Network Integration - Admin Guide) using YAST. Everything OK with the card operation in the rest of my session.
What does this mean? That the network connection works, and you're only concerned about a message during boot? Or do you have to do something actively to start the network connection? One problem might be that you have DHCP and it takes a while to get the data to set up the card, so the network start script says "backgrounding", meaning it starts up other things while DHCP is waiting for the data in the background.
my answers == After opening the session and invoking YAST as previously explained the network connection works and other software dependent upon this connection works. I use STATIC IP ADDRESSES not DHCP. Although during the session and after using YAST everything with that interface works okay. But when I
Anders you asked << What does this mean? That the network connection works, and you're only concerned about a message during boot? Or do you have to do something actively to start the network connection? power down and reboot then the boot message correctly identifies that the boot process finds the network card hardware (3c509c) as "not (yet?) active and also on a second line while examining the hardware address -- in the form of some kind of count down -- producing the meassage "no interface found". YAST makes this hardware work but it does not work on the following boot up. == Here are the boot messages: == Warning: interface eth-id-00:50:04:22:24:58 is not (yet?) active. Warning: No interface active (yet?) ------------------------------------done Waiting for mandatory devices: eth-id-00:50:04:22:24:58 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 eth-id-00:50:04:22:24:58 No interface found--------------failed == I must enter a session after boot up and use YAST and then just for that session the eth0 interface works. I can send you the routing information or any other information. It is obvious that the interface does not come alive and perform as it should until I use YAST as explained and then only for the current session. Thanks -- TED
On Thursday, 21 October 2004 09.24, Ted Hilts wrote:
After opening the session and invoking YAST as previously explained the network connection works and other software dependent upon this connection works. I use STATIC IP ADDRESSES not DHCP. Although during the session and after using YAST everything with that interface works okay. But when I power down and reboot then the boot message correctly identifies that the boot process finds the network card hardware (3c509c) as "not (yet?) active and also on a second line while examining the hardware address -- in the form of some kind of count down -- producing the meassage "no interface found". YAST makes this hardware work but it does not work on the following boot up.
what do you get if you do "grep 3c5 /etc/sysconfig/hardware/*" ? You might try editing /etc/sysconfig/kernel and adding 3c509 to MODULES_LOADED_ON_BOOT
Anders -- last part of boot file -- how do it get the complete boot file to you? Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>start services (random isdn hotplug SuSEfirewall2_init) Initializing random number generatordone Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done Starting Firewall Initialization (phase 1 of 3) done <notice>exit status of (random isdn hotplug SuSEfirewall2_init) is (0 0 0 0) <notice>start services (coldplug) coldplug scanning input: done scanning pci: ***.**Wdone scanning usb: done . . . . . . . . . . . . . . . . . . . . . . . .done <notice>exit status of (coldplug) is (0) <notice>start services (network) Setting up network interfaces: lo lo IP address: 127.0.0.1/8 Warning: detected activated samba, enabling FW_SERVICE_SMB! You still have to allow tcp port 139 on internal, dmz and/or external. Warning: interface eth0 is not (yet?) active. Warning: No interface active (yet?)done eth0 eth0 configuration: eth-id-00:50:04:22:24:58 eth0 IP address: 192.168.1.70/24 Warning: detected activated samba, enabling FW_SERVICE_SMB! You still have to allow tcp port 139 on internal, dmz and/or external. done ppp0 ppp0 Startmode is 'manual' skippedSetting up service network . . . . . . . . . . . . . . . .done <notice>exit status of (network) is (0) <notice>start services (syslog) Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/dhcp/dev/log -a /var/lib/frox/dev/log -a /var/lib/named/dev/log -a /var/lib/ntp/dev/log -a /var/lib/stunnel/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/sbin/syslogd ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/sbin/klogd ] done <notice>exit status of (syslog) is (0) <notice>start services (snmpd ntop nmb nfs) Importing Net File System (NFS)unused <notice>startproc: execve (/usr/sbin/snmpd) [ /usr/sbin/snmpd -c /etc/snmpd.conf -r -A -Lf /var/log/net-snmpd.log -p /var/run/snmpd.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/snmpd ] Starting snmpddone <notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ] Starting Samba NMB daemon done Starting service ntop ntop admin password is not yet set. Run ntop -A -u wwwrun manually unused <notice>exit status of (snmpd ntop nmb nfs) is (0 0 0 6) <notice>start services (splash_early smbfs resmgr portmap) Mount SMB File System unused <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=31 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Starting resource managerdone Starting RPC portmap daemonportmap: fork: Successdone <notice>exit status of (splash_early smbfs resmgr portmap) is (0 6 0 0) <notice>start services (sshd scanlogd running-kernel rstatd routed fbset alsasound) <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=35 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] <notice>startproc: execve (/usr/sbin/routed) [ /usr/sbin/routed ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=35 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/routed ] <notice>startproc: execve (/usr/sbin/rpc.rstatd) [ /usr/sbin/rpc.rstatd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=35 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/rpc.rstatd ] Starting service rpc.rstatdfailed Starting SSH daemondone <notice>startproc: execve (/usr/sbin/scanlogd) [ /usr/sbin/scanlogd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=35 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/scanlogd ] Starting sound driverdone Starting service scanlogddone Starting routeddone <notice>exit status of (sshd scanlogd running-kernel rstatd routed fbset alsasound) is (0 0 0 7 0 0 0) <notice>start services (splash powersaved nfsboot kbd SuSEfirewall2_setup) <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -e /etc/powersave.conf -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=42 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ] This machine supports APM Starting powersaved done Starting nfsboot (sm-notify) Backgrounding to notify hosts... daemon: Success done Loading keymap qwerty/us.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial (K doneStarting Firewall Initialization (phase 2 of 3) Warning: detected activated samba, enabling FW_SERVICE_SMB! You still have to allow tcp port 139 on internal, dmz and/or external. done <notice>exit status of (splash powersaved nfsboot kbd SuSEfirewall2_setup) is (0 0 0 0 0) <notice>start services (hwscan canna atalk) Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/cannaserver) [ /usr/sbin/cannaserver -u wnn -r /var/lib/canna ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=47 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/cannaserver ] Starting netatalk in the background ...done Starting Canna Kanji Serverdone <notice>exit status of (hwscan canna atalk) is (0 0 0) <notice>start services (ypserv smpppd rsyncd cups) Starting ypserv . . . . . . . . . . No portmapper runningfailed <notice>startproc: execve (/usr/sbin/rsyncd) [ /usr/sbin/rsyncd --daemon ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=50 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/rsyncd ] <notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=50 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ] <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=50 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] Starting rsync daemondone Starting SMPPPDdone Starting cupsddone <notice>exit status of (ypserv smpppd rsyncd cups) is (1 0 0 0) <notice>start services (ypbind smb nscd) Starting ypbind . . . . . . . . . . No portmapper runningfailed <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=54 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting Name Service Cache Daemondone Samba SMB: Waiting for cupsd to get ready(29s) (28s) (27s) (26s) (25s) done Starting Samba SMB daemon <notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh TMPDIR=/var/tmp progress=54 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/smbd ] done <notice>exit status of (ypbind smb nscd) is (1 0 0) <notice>start services (xdm sendmail nfsserver autofs) Starting service automounter/usr/lib/autofs/autofs-ldap-auto-master: error binding to server: Can't contact LDAP server ("files nis ldap" does not provide any mounts)skipped <notice>startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -O DaemonPortOptions=Addr=127.0.0.1 -L sendmail -Am -bd -q30m -om ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=57 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ] <notice>startproc: execve (/usr/sbin/rpc.mountd) [ /usr/sbin/rpc.mountd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=57 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/rpc.mountd ] <notice>startproc: execve (/usr/sbin/rpc.nfsd) [ /usr/sbin/rpc.nfsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=57 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/rpc.nfsd ] Starting NFS serverCannot register service: RPC: Unable to receive; errno = Connection refused startproc: exit status of parent of /usr/sbin/rpc.mountd: 1 Cannot register service: RPC: Unable to receive; errno = Connection refused startproc: exit status of parent of /usr/sbin/rpc.nfsd: 1 failed <notice>startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -L sendmail-client -Ac -qp30m ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=57 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ] <notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=57 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x317 RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=en_US.UTF-8 PREVLEVEL=N LINES=41 SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=en_US.UTF-8 splash=silent sscripts=65 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] Initializing SMTP port (sendmail)done Starting service kdmdone WARNING: Xmilter-amavis: local socket name /var/run/amavis/amavis-milter.sock missing <notice>exit status of (xdm sendmail nfsserver autofs) is (0 0 7 6) <notice>start services (apache2) Starting httpd2 (prefork) <notice>startproc: execve (/usr/sbin/httpd2-prefork) [ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh get_module_list_done=true progress=61 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 get_includes_done=true PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/httpd2-prefork ] done <notice>exit status of (apache2) is (0) <notice>start services (cron) Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=62 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/cron ] done <notice>exit status of (cron) is (0) <notice>start services (inetd) Starting inetd<notice>startproc: execve (/usr/sbin/inetd) [ /usr/sbin/inetd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=63 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=65 _=/sbin/startproc DAEMON=/usr/sbin/inetd ] done <notice>exit status of (inetd) is (0) <notice>start services (splash_late) <notice>exit status of (splash_late) is (0) <notice>start services (SuSEfirewall2_final) Starting Firewall Initialization (phase 3 of 3) Cannot register service: RPC: Unable to receive; errno = Connection refused Cannot register service: RPC: Unable to receive; errno = Connection refused Warning: detected activated samba, enabling FW_SERVICE_SMB! You still have to allow tcp port 139 on internal, dmz and/or external. done <notice>exit status of (SuSEfirewall2_final) is (0) Master Resource Control: runlevel 5 has been reached Failed services in runlevel 5: rstatd ypserv ypbind nfsserver Skipped services in runlevel 5: nfs smbfs autofs <notice>killproc: kill(771,3)
The Thursday 2004-10-21 at 21:28 -0600, Ted Hilts wrote: But I don't see there that it fails - in fact, it says eth0 is up:
<notice>start services (network) Setting up network interfaces: lo lo IP address: 127.0.0.1/8 Warning: detected activated samba, enabling FW_SERVICE_SMB! You still have to allow tcp port 139 on internal, dmz and/or external.
Warning: interface eth0 is not (yet?) active. Warning: No interface active (yet?)done eth0 eth0 configuration: eth-id-00:50:04:22:24:58 eth0 IP address: 192.168.1.70/24 Warning: detected activated samba, enabling FW_SERVICE_SMB! You still have to allow tcp port 139 on internal, dmz and/or external. done ppp0 ppp0 Startmode is 'manual' skippedSetting up service network . . . . . . . . . . . . . . . .done <notice>exit status of (network) is (0)
See? network is up. No problem listed, it got address 192.168.1.70 and reports "done", not "failed". The only problem is about rpc, but that is a different issue.
Failed services in runlevel 5: rstatd ypserv ypbind nfsserver
Skipped services in runlevel 5: nfs smbfs autofs <notice>killproc: kill(771,3)
According to that, network is up and running, IMO. More clues? -- Cheers, Carlos Robinson
On Thursday, 21 October 2004 09.24, Ted Hilts wrote:
After opening the session and invoking YAST as previously explained the network connection works and other software dependent upon this connection works. I use STATIC IP ADDRESSES not DHCP. Although during the session and after using YAST everything with that interface works okay. But when I power down and reboot then the boot message correctly identifies that
Anders
Did you get the boot log messages? Do you need the full log? How do I get it
to you? Sent the entire boot file to andjoh@rydsbo.net. I think the next
failure in the chain of failures is "portmap".
Initially the portmapper script failed to execute so I changed the variable
used for the path to a hard address (same as used by the variable) and now
the script SEEMS to execute (seems strange?). However I don't know how to
determine if portmap is even running (tried ps -A and netstat -an and could
not see anything on portmap). If it is running during the current session
(per instructions on p-327 section 12.9.4) then it also only runs during the
current session as did the 3c509 module (now working OK at boot time per
your last suggestion).
----- Original Message -----
From: "Anders Johansson"
boot process finds the network card hardware (3c509c) as "not (yet?) active and also on a second line while examining the hardware address -- in the form of some kind of count down -- producing the meassage "no interface found". YAST makes this hardware work but it does not work on the following boot up.
what do you get if you do "grep 3c5 /etc/sysconfig/hardware/*" ?
You might try editing /etc/sysconfig/kernel and adding 3c509 to MODULES_LOADED_ON_BOOT
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
On Friday, 22 October 2004 06.00, Ted Hilts wrote:
Anders Did you get the boot log messages?
Yes, I got it
Do you need the full log? How do I get it to you? Sent the entire boot file to andjoh@rydsbo.net. I think the next failure in the chain of failures is "portmap".
Try editing /etc/sysconfig/boot and set RUN_PARALLEL to "no"
participants (3)
-
Anders Johansson -
Carlos E. R. -
Ted Hilts