Hello, This is my first email in this mailing list, but I hope all of you can help me. I've setup 1 Server with SuSE Linux 6.4 and I try to setup IP Masquerade over My Cable Modem to serve 15 Clients. But If all clients connected, it getting slower to access internet... 8-( Why ?? The script that I used: /sbin/depmod -a /sbin/modprobe ip_masq_ftp /sbin/modprobe ip_masq_raudio /sbin/modprobe ip_masq_irc /sbin/modprobe ip_masq_cuseeme /sbin/modprobe ip_masq_vdolive echo "1" > /proc/sys/net/ipv4/ip_forward /sbin/ipchains -M -S 7200 10 160 /sbin/ipchains -P forward DENY /sbin/ipchains -A forward -s 192.168.1.0/24 -j MASQ -i eth1 --end of script---- eth0 IP =192.168.1.1 eth1 IP =202.77.125.200 Is there something wrong with the script above? Any comment will be appreciated -- Thanks n regards, Romie Djapri -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
Good question. I am about to put my 45 clients behind 6.3 masquraded. I would like to know if there any known problems.....I am listening with my eyes open............well timed question. Regards Umer Abdul Ahad Romie Djapri wrote:
Hello,
This is my first email in this mailing list, but I hope all of you can help me. I've setup 1 Server with SuSE Linux 6.4 and I try to setup IP Masquerade over My Cable Modem to serve 15 Clients. But If all clients connected, it getting slower to access internet... 8-( Why ?? The script that I used:
/sbin/depmod -a /sbin/modprobe ip_masq_ftp /sbin/modprobe ip_masq_raudio /sbin/modprobe ip_masq_irc /sbin/modprobe ip_masq_cuseeme /sbin/modprobe ip_masq_vdolive echo "1" > /proc/sys/net/ipv4/ip_forward /sbin/ipchains -M -S 7200 10 160 /sbin/ipchains -P forward DENY /sbin/ipchains -A forward -s 192.168.1.0/24 -j MASQ -i eth1 --end of script----
eth0 IP =192.168.1.1 eth1 IP =202.77.125.200
Is there something wrong with the script above?
Any comment will be appreciated
--
Thanks n regards, Romie Djapri
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
Romie Djapri wrote:
Hello,
This is my first email in this mailing list, but I hope all of you can help me. I've setup 1 Server with SuSE Linux 6.4 and I try to setup IP Masquerade over My Cable Modem to serve 15 Clients. But If all clients connected, it getting slower to access internet... 8-( Why ?? The script that I used:
/sbin/depmod -a /sbin/modprobe ip_masq_ftp /sbin/modprobe ip_masq_raudio /sbin/modprobe ip_masq_irc /sbin/modprobe ip_masq_cuseeme /sbin/modprobe ip_masq_vdolive echo "1" > /proc/sys/net/ipv4/ip_forward /sbin/ipchains -M -S 7200 10 160 /sbin/ipchains -P forward DENY /sbin/ipchains -A forward -s 192.168.1.0/24 -j MASQ -i eth1 --end of script----
eth0 IP =192.168.1.1 eth1 IP =202.77.125.200
Is there something wrong with the script above?
Any comment will be appreciated
--
Thanks n regards, Romie Djapri
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
Hello, Surely, the more users, (and thus bandwidth), connected through a single internet connection, the slower the connection to each user regardless of masquerading or anything else. Rgds Andy -- Reply to sales@itosn.com Mail to other addresses is forwarded -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
participants (3)
-
rmdjapri＠tokolinux.com -
sales＠itosn.com -
uabdulahad＠prti.com.au