When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use? Bye, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Wolfgang Mueller wrote:
When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use?
Wolfgang, scsi devices are named sequentially, so it depends on the sequence in which you plugged in the drives. -- Per Jessen, Zürich (20.0°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 04/21/11 14:44, Per Jessen wrote:
Wolfgang Mueller wrote:
When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use?
Wolfgang, scsi devices are named sequentially, so it depends on the sequence in which you plugged in the drives.
So, following your sequential philosophy, the second stick should be /dev/sdb2. But mounting this device failed because it did not exist.
Per Jessen, Zürich (20.0°C)
Wolfgang Müller, Hannover (29°C, or my thermometer is broken) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Thursday, April 21, 2011 03:37:02 PM Wolfgang Mueller wrote:
On 04/21/11 14:44, Per Jessen wrote:
Wolfgang Mueller wrote:
When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use?
Wolfgang, scsi devices are named sequentially, so it depends on the sequence in which you plugged in the drives.
So, following your sequential philosophy, the second stick should be /dev/sdb2. But mounting this device failed because it did not exist.
You cannot guess that, kernel decides which name to use. The next name kernel use would be /dev/sdc1 btw. -- İsmail Dönmez - openSUSE Booster SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany
Wolfgang Mueller wrote:
On 04/21/11 14:44, Per Jessen wrote:
Wolfgang Mueller wrote:
When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use?
Wolfgang, scsi devices are named sequentially, so it depends on the sequence in which you plugged in the drives.
So, following your sequential philosophy, the second stick should be /dev/sdb2. But mounting this device failed because it did not exist.
the '2' is the partition-number - the next drive would most probably be /dev/sdc, and you could try mounting /dev/sdc1. You can also check the output of dmesg and see the drive-letter that was assigned when you plugged in the stick.
Per Jessen, Zürich (20.0°C)
Wolfgang Müller, Hannover (29°C, or my thermometer is broken)
Yeah, 29C sounds like a lot. -- Per Jessen, Zürich (20.9°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Wolfgang Mueller wrote:
So, following your sequential philosophy, the second stick should be /dev/sdb2. But mounting this device failed because it did not exist. No, it should be sdc1. The 3rd letter refers to the device and the number, the partition.
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Thursday, April 21, 2011 02:40:36 PM Wolfgang Mueller wrote:
When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use?
Instead of looking for hardcoded names, look under /dev/disk/by-id so you can see your disks by id. Or if they have labels /dev/disk/by-label etc. Regards. -- İsmail Dönmez - openSUSE Booster SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany
On 04/21/11 14:45, İsmail Dönmez wrote:
On Thursday, April 21, 2011 02:40:36 PM Wolfgang Mueller wrote:
When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use? Instead of looking for hardcoded names, look under /dev/disk/by-id so you can see your disks by id. Or if they have labels /dev/disk/by-label etc.
I plugged in two usb sticks and invoked 'ls /dev/disk/by-id'. A list appeared referring to the first stick as usb-Generic_USB_Flash_Disk_00000000000064-0:0 usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1 and to the second stick as usb-058f_Spaceloop_8GB_E7B24B26-0:0 usb-058f_Spaceloop_8GB_E7B24B26-0:0-part1 But that does not give me access to the sticks since these names are completely useless because they are no directory names. In other words, neither /dev/usb-Generic_USB_Flash_Disk_00000000000064-0:0 nor /dev/usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1 nor /dev/usb-058f_Spaceloop_8GB_E7B24B26-0:0 nor /dev/sb-058f_Spaceloop_8GB_E7B24B26-0:0-part1 nor /dev/disk/usb-Generic_USB_Flash_Disk_00000000000064-0:0 nor /dev/disk/usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1 nor /dev/disk/usb-058f_Spaceloop_8GB_E7B24B26-0:0 nor /dev/disk/sb-058f_Spaceloop_8GB_E7B24B26-0:0-part1 exists. Anyway thank you, even though your information did not help. Bye, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Thursday, April 21, 2011 03:26:14 PM Wolfgang Mueller wrote:
On 04/21/11 14:45, İsmail Dönmez wrote:
On Thursday, April 21, 2011 02:40:36 PM Wolfgang Mueller wrote:
When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use?
Instead of looking for hardcoded names, look under /dev/disk/by-id so you can see your disks by id. Or if they have labels /dev/disk/by-label etc.
I plugged in two usb sticks and invoked 'ls /dev/disk/by-id'. A list appeared referring to the first stick as
usb-Generic_USB_Flash_Disk_00000000000064-0:0
This is the disk name, i.e /dev/sdb
usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1
This is the partition name, ie. /dev/sdb1 They are not supposed to be directories, what do you mean by that? For example on my computer I see that: ls -al /dev/disk/by-id lrwxrwxrwx 1 root root 9 Apr 21 15:21 usb- SanDisk_Cruzer_200443244318A2E1B093-0:0 -> ../../sdd lrwxrwxrwx 1 root root 10 Apr 21 15:21 usb- SanDisk_Cruzer_200443244318A2E1B093-0:0-part1 -> ../../sdd1 lrwxrwxrwx 1 root root 10 Apr 21 15:21 usb- SanDisk_Cruzer_200443244318A2E1B093-0:0-part2 -> ../../sdd2 Regards. -- İsmail Dönmez - openSUSE Booster SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany
On 04/21/11 15:27, İsmail Dönmez wrote:
On Thursday, April 21, 2011 03:26:14 PM Wolfgang Mueller wrote:
I plugged in two usb sticks and invoked 'ls /dev/disk/by-id'. A list appeared referring to the first stick as
usb-Generic_USB_Flash_Disk_00000000000064-0:0 This is the disk name, i.e /dev/sdb
usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1 This is the partition name, ie. /dev/sdb1
They are not supposed to be directories, what do you mean by that?
For example on my computer I see that:
ls -al /dev/disk/by-id
lrwxrwxrwx 1 root root 9 Apr 21 15:21 usb- SanDisk_Cruzer_200443244318A2E1B093-0:0 -> ../../sdd
lrwxrwxrwx 1 root root 10 Apr 21 15:21 usb- SanDisk_Cruzer_200443244318A2E1B093-0:0-part1 -> ../../sdd1
lrwxrwxrwx 1 root root 10 Apr 21 15:21 usb- SanDisk_Cruzer_200443244318A2E1B093-0:0-part2 -> ../../sdd2
Now, I have understood: My error was doing a simple 'ls' instead of 'ls -a'. So, thanks to your tip, I found that my second stick corresponds to /dev/sdc1. Thanks a lot, İsmail, you helped me very much! Bye, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Thursday, April 21, 2011 03:57:25 PM Wolfgang Mueller wrote:
On 04/21/11 15:27, İsmail Dönmez wrote:
On Thursday, April 21, 2011 03:26:14 PM Wolfgang Mueller wrote:
I plugged in two usb sticks and invoked 'ls /dev/disk/by-id'. A list appeared referring to the first stick as
usb-Generic_USB_Flash_Disk_00000000000064-0:0
This is the disk name, i.e /dev/sdb
usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1
This is the partition name, ie. /dev/sdb1
They are not supposed to be directories, what do you mean by that?
For example on my computer I see that:
ls -al /dev/disk/by-id
lrwxrwxrwx 1 root root 9 Apr 21 15:21 usb- SanDisk_Cruzer_200443244318A2E1B093-0:0 -> ../../sdd
lrwxrwxrwx 1 root root 10 Apr 21 15:21 usb- SanDisk_Cruzer_200443244318A2E1B093-0:0-part1 -> ../../sdd1
lrwxrwxrwx 1 root root 10 Apr 21 15:21 usb- SanDisk_Cruzer_200443244318A2E1B093-0:0-part2 -> ../../sdd2
Now, I have understood: My error was doing a simple 'ls' instead of 'ls -a'. So, thanks to your tip, I found that my second stick corresponds to /dev/sdc1.
Just forget about /dev/sdc1 and always use the device id :-) Regards. -- İsmail Dönmez - openSUSE Booster SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany
On 04/21/2011 09:26 AM, Wolfgang Mueller wrote:
On 04/21/11 14:45, İsmail Dönmez wrote:
On Thursday, April 21, 2011 02:40:36 PM Wolfgang Mueller wrote:
When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use? Instead of looking for hardcoded names, look under /dev/disk/by-id so you can see your disks by id. Or if they have labels /dev/disk/by-label etc.
I plugged in two usb sticks and invoked 'ls /dev/disk/by-id'.
As Ismail pointed out you want to run "ls -l /dev/disk/by-id" to see where the names point to. You can also run "parted -l" or "fdisk -l" either will list the devices. HTH Robert -- Robert Schweikert MAY THE SOURCE BE WITH YOU Novell-IBM Software Integration Center LINUX Tech Lead rschweikert@novell.com rschweikert@ca.ibm.com 781-464-8147 Novell Making IT Work As One -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Hello, On Thu, 21 Apr 2011, Wolfgang Mueller wrote:
On 04/21/11 14:45, ??smail Dönmez wrote:
On Thursday, April 21, 2011 02:40:36 PM Wolfgang Mueller wrote:
When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use? Instead of looking for hardcoded names, look under /dev/disk/by-id so you can see your disks by id. Or if they have labels /dev/disk/by-label etc.
I plugged in two usb sticks and invoked 'ls /dev/disk/by-id'. A list appeared referring to the first stick as
usb-Generic_USB_Flash_Disk_00000000000064-0:0 usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1
and to the second stick as
usb-058f_Spaceloop_8GB_E7B24B26-0:0 usb-058f_Spaceloop_8GB_E7B24B26-0:0-part1
Use these in your /etc/fstab, then you can mount them as you would /dev/sdb1. E.g. create a directory for each stick: # mkdir /media/Spaceloop /media/Usbstick use a more meaningful name for the latter if you can think of one. Then, use the following in your /etc/fstab ( \ at the end of line means the following stuff should be on the same line): /dev/disk/by-id/usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1 \ /media/Usbstick auto defaults,user,users,noauto 0 0 /dev/disk/by-id/usb-058f_Spaceloop_8GB_E7B24B26-0:0-part1 \ /media/Spaceloop auto defaults,user,users,noauto 0 0 With that, you can use 'mount /media/Spaceloop' and 'eject /media/Spaceloop' for save sync, unmount and "eject" and 'mount /media/Usbstick' (similiarly) no matter what port you plug your sticks. With KDE and Gnome, you can AFAIK have mount/eject done via an Icon. I know no details there though. HTH, -dnh -- +-------------------------------------------------------------------+ |-- SELF-ASSEMBLY MOEBIUS-STRIP - SEE OTHER SIDE FOR INSTRUCTIONS --| +-------------------------------------------------------------------+ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 4/21/2011 9:26 AM, Wolfgang Mueller wrote:
On 04/21/11 14:45, İsmail Dönmez wrote:
On Thursday, April 21, 2011 02:40:36 PM Wolfgang Mueller wrote:
When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use? Instead of looking for hardcoded names, look under /dev/disk/by-id so you can see your disks by id. Or if they have labels /dev/disk/by-label etc.
I plugged in two usb sticks and invoked 'ls /dev/disk/by-id'. A list appeared referring to the first stick as
usb-Generic_USB_Flash_Disk_00000000000064-0:0 usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1
and to the second stick as
usb-058f_Spaceloop_8GB_E7B24B26-0:0 usb-058f_Spaceloop_8GB_E7B24B26-0:0-part1
But that does not give me access to the sticks since these names are completely useless because they are no directory names. In other words, neither /dev/usb-Generic_USB_Flash_Disk_00000000000064-0:0 nor /dev/usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1 nor /dev/usb-058f_Spaceloop_8GB_E7B24B26-0:0 nor /dev/sb-058f_Spaceloop_8GB_E7B24B26-0:0-part1 nor /dev/disk/usb-Generic_USB_Flash_Disk_00000000000064-0:0 nor /dev/disk/usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1 nor /dev/disk/usb-058f_Spaceloop_8GB_E7B24B26-0:0 nor /dev/disk/sb-058f_Spaceloop_8GB_E7B24B26-0:0-part1 exists.
Anyway thank you, even though your information did not help.
Bye, Wolfgang
His information may not have helped but in fairness I have to say that his answer _exactly_ answered the question you asked. If you wanted different information, you should have asked for what you actually wanted. You said "/dev/sdb1" in your own question, which is a device node, not a filesystem mount point. These locations above are exactly the same device nodes. You asked for a device node and you got a device node. Now you are asking for a mounted filesystem mount point, which is entirely different. It's ok that you were hazy on the distinction since it's a pretty low level techie thing that the average user is generally protected from having to understand. But I just wanted to say that it was wrong to say the information was not helpful. rather, your question was not. -- bkw -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Thu, 2011-04-21 at 15:26 +0200, Wolfgang Mueller wrote:
On 04/21/11 14:45, İsmail Dönmez wrote:
On Thursday, April 21, 2011 02:40:36 PM Wolfgang Mueller wrote:
When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use? Instead of looking for hardcoded names, look under /dev/disk/by-id so you can see your disks by id. Or if they have labels /dev/disk/by-label etc.
I plugged in two usb sticks and invoked 'ls /dev/disk/by-id'. A list appeared referring to the first stick as
usb-Generic_USB_Flash_Disk_00000000000064-0:0 usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1
and to the second stick as
usb-058f_Spaceloop_8GB_E7B24B26-0:0 usb-058f_Spaceloop_8GB_E7B24B26-0:0-part1
But that does not give me access to the sticks since these names are completely useless because they are no directory names. In other words, neither /dev/usb-Generic_USB_Flash_Disk_00000000000064-0:0 nor /dev/usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1 nor /dev/usb-058f_Spaceloop_8GB_E7B24B26-0:0 nor /dev/sb-058f_Spaceloop_8GB_E7B24B26-0:0-part1 nor /dev/disk/usb-Generic_USB_Flash_Disk_00000000000064-0:0 nor /dev/disk/usb-Generic_USB_Flash_Disk_00000000000064-0:0-part1 nor /dev/disk/usb-058f_Spaceloop_8GB_E7B24B26-0:0 nor /dev/disk/sb-058f_Spaceloop_8GB_E7B24B26-0:0-part1 exists.
Anyway thank you, even though your information did not help.
If you're trying to figure out where the file system is hanging them, I'd suggest that you try looking in /media. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
İsmail Dönmez wrote:
Instead of looking for hardcoded names, look under /dev/disk/by-id so you can see your disks by id. Or if they have labels /dev/disk/by-label etc.
If they have labels, they should also be mounted as /media/<label>. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Wolfgang Mueller wrote:
When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use?
The devices go up by letter, so you'll have sdc, sdd etc. The number refers to partitions on the device. Also, you can have the drives auto mounted to specific mount points. You can set this up in the Yast Partitioner when you format the device -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 4/21/2011 8:40 AM, Wolfgang Mueller wrote:
When I use one USB port only, I mount it as /dev/sdb1. But for simultaneously using two or even three ports, which are the /dev name(s) I have to use?
There is no way to predict what the /dev/sd* names will be. You *could* watch tail -f /var/log/messages for the device names as they appear, The real answer is "don't use those names" they are a hold-over from days gone by when disk drives were fixed things that never moved or changed for the life of a machine. Instead there are a few different ways to identify a disk today. One, easiest, is rely on the automounter and just look in: /media/<volume name> That will be the already-mounted filesystem, not a device or link to a device. Or, to find the devices for the disk and any partitions: look under any/all of the following, depending on your preference: /dev/disk/by-id /dev/disk/by-path /dev/disk/by-uuid The same devices will appear under all 3 of those. You use whichever is most convenient for you. -- bkw -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 04/21/11 22:37, Brian K. White wrote:
[...] There is no way to predict what the /dev/sd* names will be.
You *could* watch tail -f /var/log/messages for the device names as they appear,
The real answer is "don't use those names" they are a hold-over from days gone by when disk drives were fixed things that never moved or changed for the life of a machine.
Instead there are a few different ways to identify a disk today.
One, easiest, is rely on the automounter and just look in: /media/<volume name> That will be the already-mounted filesystem, not a device or link to a device.
But that means that autofs must be running. So far it is not in my system. By the way, it is interesting that the cdrom is mounted automatically but the usb devices are not. Years ago, I used autofs for automatically mounting nfs file systems. But as soon as one of the servers was missing, the computer that tried to mount his file system became so slow that working on it became almost impossible. That's the reason why I do not like autofs. It is safer to mount the usb devices manually. But I still wonder how the cdrom can be mounted automatically without autofs running. Bye, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 4/21/2011 6:22 PM, Wolfgang Mueller wrote:
On 04/21/11 22:37, Brian K. White wrote:
[...] There is no way to predict what the /dev/sd* names will be.
You *could* watch tail -f /var/log/messages for the device names as they appear,
The real answer is "don't use those names" they are a hold-over from days gone by when disk drives were fixed things that never moved or changed for the life of a machine.
Instead there are a few different ways to identify a disk today.
One, easiest, is rely on the automounter and just look in: /media/<volume name> That will be the already-mounted filesystem, not a device or link to a device.
But that means that autofs must be running. So far it is not in my system. By the way, it is interesting that the cdrom is mounted automatically but the usb devices are not.
Years ago, I used autofs for automatically mounting nfs file systems. But as soon as one of the servers was missing, the computer that tried to mount his file system became so slow that working on it became almost impossible.
That's the reason why I do not like autofs. It is safer to mount the usb devices manually. But I still wonder how the cdrom can be mounted automatically without autofs running.
The total collection of things that might or might not affect this are many, and many of which are obsolete today even if they were standard last year, of course, this is Linux. But Google means you don't have to wonder unless you want to. -- bkw -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Wolfgang Mueller said the following on 04/21/2011 06:22 PM:
One, easiest, is rely on the automounter and just look in: /media/<volume name> That will be the already-mounted filesystem, not a device or link to a device. But that means that autofs must be running. So far it is not in my system. By the way, it is interesting that the cdrom is mounted automatically but the usb devices are not.
That is because it has nothing to do with autofs. There is an automounter in HAL. If you run 'ps' you will find something like root 2682 2193 0 16:07 ? 00:00:02 hald-addon-storage: polling /dev/sr0 This is going to be depreciated and replaced with udisk, so you might instead see root 3852 3846 0 16:08 ? 00:00:01 udisks-daemon: polling /dev/sr0 Take a look at the udev rules in /etc/udev/rules.d What happens? Well watch the system logs when you insert/remove a usb stick tail -f /var/log/messages Apr 21 18:46:03 BigBoy kernel: [ 9575.720034] usb 1-8: new high speed USB device using ehci_hcd and address 3 Apr 21 18:46:03 BigBoy kernel: [ 9575.856890] usb 1-8: New USB device found, idVendor=0204, idProduct=6025 Apr 21 18:46:03 BigBoy kernel: [ 9575.856897] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Apr 21 18:46:03 BigBoy kernel: [ 9575.856902] usb 1-8: Product: Flash Disk Apr 21 18:46:03 BigBoy kernel: [ 9575.856906] usb 1-8: SerialNumber: 000CCCBB9999 Apr 21 18:46:06 BigBoy kernel: [ 9579.074221] Initializing USB Mass Storage driver... Apr 21 18:46:06 BigBoy kernel: [ 9579.074550] scsi2 : usb-storage 1-8:1.0 Apr 21 18:46:06 BigBoy kernel: [ 9579.074727] usbcore: registered new interface driver usb-storage Apr 21 18:46:06 BigBoy kernel: [ 9579.074732] USB Mass Storage support registered. Apr 21 18:46:07 BigBoy kernel: [ 9580.072769] scsi 2:0:0:0: Direct-Access Flash Disk 5.00 PQ: 0 ANSI: 2 Apr 21 18:46:07 BigBoy kernel: [ 9580.073138] sd 2:0:0:0: Attached scsi generic sg2 type 0 Apr 21 18:46:07 BigBoy kernel: [ 9580.077366] sd 2:0:0:0: [sdb] 129024 512-byte logical blocks: (66.0 MB/63.0 MiB) Apr 21 18:46:07 BigBoy kernel: [ 9580.077854] sd 2:0:0:0: [sdb] Write Protect is off Apr 21 18:46:07 BigBoy kernel: [ 9580.077860] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08 Apr 21 18:46:07 BigBoy kernel: [ 9580.077865] sd 2:0:0:0: [sdb] Assuming drive cache: write through Apr 21 18:46:07 BigBoy kernel: [ 9580.082022] sd 2:0:0:0: [sdb] Assuming drive cache: write through Apr 21 18:46:07 BigBoy kernel: [ 9580.082031] sdb: sdb1 Apr 21 18:46:07 BigBoy kernel: [ 9580.086754] sd 2:0:0:0: [sdb] Assuming drive cache: write through Apr 21 18:46:07 BigBoy kernel: [ 9580.086764] sd 2:0:0:0: [sdb] Attached SCSI removable disk Apr 21 18:46:09 BigBoy hald: mounted /dev/sdb1 on behalf of uid 501 Of curse it helps that I have a line in /etc/fstab that reads usbfs /proc/bus/usb usbfs user,noauto,defaults 0 0 The "user" is a key part of what makes the magic work. See the manual page :-) Nothing what so ever to do with autofs! If you go back over the archives you'll find this has come up a few times in the last year. -- If you are using Windows 2000, there is no chance that DES is your weak link. The only justification for using 3DES is that it is cheap. -- William Hugh Murray, CISSP -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Hi, reading through the whole thread, I'm still not sure what you really want. If its simply to mount your USB-devices, then (assuming hal is running on your system and halmount is installed) you can receive a list of all devices attached by simply typing halmount on the command line. It gives you a list of devices and their mount point (if mounted). You can then simply mount a device with "halmount devicename" using the devicename that halmount showed you before. Karl -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (10)
-
Anton Aylward
-
Brian K. White
-
David Haller
-
İsmail Dönmez
-
James Knott
-
Karl Sinn
-
Mike McMullin
-
Per Jessen
-
Robert Schweikert
-
Wolfgang Mueller