I posted this once before and had no resonses. I am at a stuck-point on this and no one else who has tried has been able to help me. Can someone look at it and at least tell me anything? Thanks. ;) I am trying to set up a Linux box to be a proxy for my Internet connection via cable modem. I am using SuSE 6.4. Here is the output if I do an ifconfig. Two questions about it follows: eth0 Link encap:Ethernet HWaddr 08:00:09:2B:7B:70 inet addr:24.166.xxx.xxx Bcast:255.255.255.255 Mask:255.255.255.0 UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:3 Base address:0x300 DMA chan:5 eth1 Link encap:Ethernet HWaddr C1:C1:C1:C1:C1:C1 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:10 Base address:0x320 DMA chan:3 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 Question 1: The HWaddr of eth1 is not being read in correctly. The real numbers are 00:60:B0:1D:36:64. The DOS utility that came with the card to flash its memory (for address, DMA, IRQ, etc.) displayed the correct address (confirmed by looking at the numbers on the card myself). How can I get Linux to read the number correctly? Question 2: Other than the HWaddr of eth1, is there anything else that looks funny? I showed the ifconfig output to a friend and he thought that the RUNNING MULTICAST on eth1 looked fishy. Can someone tell me if this looks right for what I want to do, and if not, inform me on how I can correct it? Thanks in advance for your help. - Jesse === <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HEAD> <META http-equiv=Content-Type content="text/html; charset=iso-8859-1"> <META content="MSHTML 5.50.4207.2601" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT size=2> I posted this once before and had no resonses. I am at a stuck-point on this and no one else who has tried has been able to help me. Can someone look at it and at least tell me anything? Thanks. ;) I am trying to set up a Linux box to be a proxy for my Internet connection via cable modem. I am using SuSE 6.4. Here is the output if I do an ifconfig. Two questions about it follows: eth0 Link encap:Ethernet HWaddr 08:00:09:2B:7B:70 inet addr:24.166.xxx.xxx Bcast:255.255.255.255 Mask:255.255.255.0 UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:3 Base address:0x300 DMA chan:5 eth1 Link encap:Ethernet HWaddr C1:C1:C1:C1:C1:C1 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:10 Base address:0x320 DMA chan:3 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 Question 1: The HWaddr of eth1 is not being read in correctly. The real numbers are 00:60:B0:1D:36:64. The DOS utility that came with the card to flash its memory (for address, DMA, IRQ, etc.) displayed the correct address (confirmed by looking at the numbers on the card myself). How can I get Linux to read the number correctly? Question 2: Other than the HWaddr of eth1, is there anything else that looks funny? I showed the ifconfig output to a friend and he thought that the RUNNING MULTICAST on eth1 looked fishy. Can someone tell me if this looks right for what I want to do, and if not, inform me on how I can correct it? Thanks in advance for your help. </P></FONT></DIV> <DIV><FONT size=2></FONT> </DIV> <DIV><FONT size=2>- Jesse</FONT></DIV> <DIV> </DIV> <DIV><FONT size=2>===</FONT></DIV></BODY>
Hello Jesse, on Sunday, August 20, 2000 at 16:19:54 -0500, you sat in front of your keyboard and wrote:
I posted this once before and had no resonses. I am at a stuck-point on this and no one else who has tried has been able to help me.
Can someone look at it and at least tell me anything?
Thanks. ;)
I am trying to set up a Linux box to be a proxy for my Internet connection via cable modem.
I am using SuSE 6.4.
Here is the output if I do an ifconfig. Two questions about it follows:
eth0 Link encap:Ethernet HWaddr 08:00:09:2B:7B:70 inet addr:24.166.xxx.xxx Bcast:255.255.255.255 Mask:255.255.255.0 UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:3 Base address:0x300 DMA chan:5
eth1 Link encap:Ethernet HWaddr C1:C1:C1:C1:C1:C1 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:10 Base address:0x320 DMA chan:3
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
Question 1:
The HWaddr of eth1 is not being read in correctly. The real numbers are 00:60:B0:1D:36:64. The DOS utility that came with the card to flash its memory (for address, DMA, IRQ, etc.) displayed the correct address (confirmed by looking at the numbers on the card myself).
How can I get Linux to read the number correctly?
Question 2:
Other than the HWaddr of eth1, is there anything else that looks funny? I showed the ifconfig output to a friend and he thought that the RUNNING MULTICAST on eth1 looked fishy. Can someone tell me if this looks right for what I want to do, and if not, inform me on how I can correct it?
I don't know for your hardware address error but for the RUNNING MULTICAST all
seems correct. I've got quite the same output for my internal network
interface and all works just fine.
Regards...
--
Jean-François Bocquet
Hi,
not sure, but "Bcast:255.255.255.255" at eth0 seems to be wrong.
I think you should change the IFCONFIG_0 in /etc/rc.config to something like:
IFCONFIG_0="24.166.xxx.xxx broadcast 24.166.xxx.255 netmask 255.255.255.0"
Just my guess
Matthias
"Jesse Waldack"
I posted this once before and had no resonses. I am at a stuck-point on this and no one else who has tried has been able to help me.
Can someone look at it and at least tell me anything?
Thanks. ;)
I am trying to set up a Linux box to be a proxy for my Internet connection via cable modem.
I am using SuSE 6.4.
Here is the output if I do an ifconfig. Two questions about it follows:
eth0 Link encap:Ethernet HWaddr 08:00:09:2B:7B:70 inet addr:24.166.xxx.xxx Bcast:255.255.255.255 Mask:255.255.255.0 UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:3 Base address:0x300 DMA chan:5
eth1 Link encap:Ethernet HWaddr C1:C1:C1:C1:C1:C1 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:10 Base address:0x320 DMA chan:3
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
Question 1:
The HWaddr of eth1 is not being read in correctly. The real numbers are 00:60:B0:1D:36:64. The DOS utility that came with the card to flash its memory (for address, DMA, IRQ, etc.) displayed the correct address (confirmed by looking at the numbers on the card myself).
How can I get Linux to read the number correctly?
Question 2:
Other than the HWaddr of eth1, is there anything else that looks funny? I showed the ifconfig output to a friend and he thought that the RUNNING MULTICAST on eth1 looked fishy. Can someone tell me if this looks right for what I want to do, and if not, inform me on how I can correct it?
Thanks in advance for your help.
- Jesse
===
---------- Get your own FREE, personal Netscape Webmail account today at http://home.netscape.com/webmail/ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
I assume the xxx in eth0's address is actual numbers ? eth0's broadcast address is wrong. You are using irq 3 for eth0 - it is the same interrupt used by DOS COM2 and that could be the problem. The hardware address for eth1 look fishy. My guess is your ethernet card(s) is faulty, try swapping them and see if it helps. Hope this helps. Jesse Waldack wrote:
I posted this once before and had no resonses. I am at a stuck-point on this and no one else who has tried has been able to help me.
Can someone look at it and at least tell me anything?
Thanks. ;)
I am trying to set up a Linux box to be a proxy for my Internet connection via cable modem.
I am using SuSE 6.4.
Here is the output if I do an ifconfig. Two questions about it follows:
eth0 Link encap:Ethernet HWaddr 08:00:09:2B:7B:70 inet addr:24.166.xxx.xxx Bcast:255.255.255.255 Mask:255.255.255.0 UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:3 Base address:0x300 DMA chan:5
eth1 Link encap:Ethernet HWaddr C1:C1:C1:C1:C1:C1 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:10 Base address:0x320 DMA chan:3
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
Question 1:
The HWaddr of eth1 is not being read in correctly. The real numbers are 00:60:B0:1D:36:64. The DOS utility that came with the card to flash its memory (for address, DMA, IRQ, etc.) displayed the correct address (confirmed by looking at the numbers on the card myself).
How can I get Linux to read the number correctly?
Question 2:
Other than the HWaddr of eth1, is there anything else that looks funny? I showed the ifconfig output to a friend and he thought that the RUNNING MULTICAST on eth1 looked fishy. Can someone tell me if this looks right for what I want to do, and if not, inform me on how I can correct it?
Thanks in advance for your help. - Jesse ===
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
i want to add 2 more q? how does ifconfig gets its values and how does it remove them why does it continue to show ppp's not active.. in other words why when i kill wvdial it continue to show ppp0, ppp1 etc etc forcingi it next time to add another ppp lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 ppp0 Link encap:Point-to-Point Protocol inet addr:206.173.16.210 P-t-P:206.173.16.7 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:13 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 ppp1 Link encap:Point-to-Point Protocol inet addr:206.173.26.98 P-t-P:206.173.26.4 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 ppp2 Link encap:Point-to-Point Protocol inet addr:206.173.16.73 P-t-P:206.173.16.4 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:219 errors:0 dropped:0 overruns:0 frame:0 TX packets:246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 Rolando Roman -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
I don't use wvdial, but "ifconfig ppp1 down" should remove ppp1 Rolando Roman wrote:
i want to add 2 more q?
how does ifconfig gets its values and how does it remove them why does it continue to show ppp's not active.. in other words why when i kill wvdial it continue to show ppp0, ppp1 etc etc forcingi it next time to add another ppp
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
ppp0 Link encap:Point-to-Point Protocol inet addr:206.173.16.210 P-t-P:206.173.16.7 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:13 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10
ppp1 Link encap:Point-to-Point Protocol inet addr:206.173.26.98 P-t-P:206.173.26.4 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10
ppp2 Link encap:Point-to-Point Protocol inet addr:206.173.16.73 P-t-P:206.173.16.4 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:219 errors:0 dropped:0 overruns:0 frame:0 TX packets:246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10
Rolando Roman
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
Rolando Roman wrote:
i want to add 2 more q?
how does ifconfig gets its values and how does it remove them why does it continue to show ppp's not active.. in other words why when i kill wvdial it continue to show ppp0, ppp1 etc etc forcingi it next time to add another ppp
Just a question, but how are you 'killing' wvdial?
I used to find problems if it wasn't shut down with Ctrl-C.
--
This Email is 100% Virus Free!
How do I know? Because no Microsoft
products were used to generate it!
Regards Don Hansford
ECKYTECH COMPUTING/
SQIT Warwick
i was using ctrl+c its strange this started after (i dont remeber) but it used to be ok,,,, until i find a solution i am using a script to kill everything now, i suspect the problem is not wvdial but pppd [kill `cat /var/run/ppp0.pid` ifconfig ppp0 down] On Tue, 22 Aug 2000, Don Hansford wrote: > Rolando Roman wrote: > >
i want to add 2 more q?
how does ifconfig gets its values and how does it remove them why does it continue to show ppp's not active.. in other words why when i kill wvdial it continue to show ppp0, ppp1 etc etc forcingi it next time to add another ppp
Just a question, but how are you 'killing' wvdial? I used to find problems if it wasn't shut down with Ctrl-C. --
This Email is 100% Virus Free! How do I know? Because no Microsoft products were used to generate it!
Regards Don Hansford ECKYTECH COMPUTING/ SQIT Warwick
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
-- Rolando Roman -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
Hi all, I can't get ScriptAlias to work for the second of my 2 VirtualHosts . I am trying to setup name based Virtual Hosts . I run a caching DNS for my fakehost adventus.cxm The linux box is server.adventus.cxm and has CNAME entries for www.adventus.cxm, hpro.adventus.cxm etc. The Server root is /usr/local/apache www was originally my Mainserver .... now it is being run as a VirtualHost too.. I commented out the www lines in the main server area , and moved them to a virtualhost box. I then created a NEW virtual host hpro.adventus.cxm....... with just the DocRoot & servername directives, hpro works fine ... BUT when I add the ScriptAlias line to hpro, httpd fails to START ... On running ../apachectl configtest, i get the following error : Syntax error on line 1005 of /usr/local/apache/conf/httpd.conf: ScriptAlias take two arguments, a fakename and a realname ..... What am i missing ? Regards Anurag Jalan -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
Hello Jesse, on Sunday, August 20, 2000 at 16:19:54 -0500, you sat in front of your keyboard and wrote:
I posted this once before and had no resonses. I am at a stuck-point on this and no one else who has tried has been able to help me.
Can someone look at it and at least tell me anything?
Thanks. ;)
I am trying to set up a Linux box to be a proxy for my Internet connection via cable modem.
I am using SuSE 6.4.
Here is the output if I do an ifconfig. Two questions about it follows:
eth0 Link encap:Ethernet HWaddr 08:00:09:2B:7B:70 inet addr:24.166.xxx.xxx Bcast:255.255.255.255 Mask:255.255.255.0 UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:3 Base address:0x300 DMA chan:5
eth1 Link encap:Ethernet HWaddr C1:C1:C1:C1:C1:C1 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:10 Base address:0x320 DMA chan:3
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
Question 1:
The HWaddr of eth1 is not being read in correctly. The real numbers are 00:60:B0:1D:36:64. The DOS utility that came with the card to flash its memory (for address, DMA, IRQ, etc.) displayed the correct address (confirmed by looking at the numbers on the card myself).
How can I get Linux to read the number correctly?
I didn't try but reading the man page of ifconfig I figured out this:
ifconfig eth1 hw ether 00:60:B0:1D:36:64
Hope that helps...
--
Jean-François Bocquet
participants (7)
-
a_jalan@vsnl.com
-
donh@halenet.com.au
-
jwaldack@kc.rr.com
-
landie@concentric.net
-
MatthiasPatz@netscape.net
-
pgp@sactria.co.za
-
tns01@free.fr