[opensuse] 10.1 Multiple wireless routers 1 wireless card?
Hey all... This might be one of those that just can't be done... Ok... I have a DLink 451 (HSDPA hotspot wireless router) that I have setup as 192.168.1.1 w/ DHCP off (all the computers have set IPs). I also have a ancient linksys befw11s4 wireless. In a perfect world I want to have the linksys act as an AP for the printer (yes it is networkable) and the dlink connect to the world. All of the computers would connect via the dlink, but be able to print by sending via cups to 192.168.1.1/2 Now I found a couple of ideas on how to do it: I set the linksys to 192.168.1.2, both the routers are on channel 1. One place I've run into problems is that the howtos I've found all say that the essid's have to be different. So say, the dlink's essid is route1, and linksys is route2. The problem with this is the network card setup requires an essid in order to use WEP. If I use route1 then it can't see route2. The easiest way to do it is to buy a second wireless card and set the linksys as 192.168.0.1, but I would rather get it to work without the this way. Any ideas be appreciated... -- Quis custodiet ipsos custodes “To announce that there must be no criticism of the president, or that we are to stand by the president, right or wrong, is not only unpatriotic and servile, but is morally treasonable to the American public.” [Theodore Roosevelt] 1918 Adolph & Sharon Weidanz SuSE 10.1 '78 43' Endeavour Ketch Folding@Home Team 45 S/V Time To Paws -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Adolph Weidanz wrote:
Hey all...
This might be one of those that just can't be done...
Ok... I have a DLink 451 (HSDPA hotspot wireless router) that I have setup as 192.168.1.1 w/ DHCP off (all the computers have set IPs). I also have a ancient linksys befw11s4 wireless. In a perfect world I want to have the linksys act as an AP for the printer (yes it is networkable) and the dlink connect to the world. All of the computers would connect via the dlink, but be able to print by sending via cups to 192.168.1.1/2
Now I found a couple of ideas on how to do it: I set the linksys to 192.168.1.2, both the routers are on channel 1. One place I've run into problems is that the howtos I've found all say that the essid's have to be different. So say, the dlink's essid is route1, and linksys is route2. The problem with this is the network card setup requires an essid in order to use WEP. If I use route1 then it can't see route2.
The easiest way to do it is to buy a second wireless card and set the linksys as 192.168.0.1, but I would rather get it to work without the this way.
Any ideas be appreciated...
What I am not clear about is whether the other machines have wi-fi or cable networking ... Unfortunately AP are low level connection points and normal IP based routing techniques cannot be used with the APs themselves. If you choose to run two distinct wireless networks and you need one machine to connect to both you will need two wi-fi cards on that machine. To avoid the two interfering with each other you need them to be on two channels at least 2 apart (i.e. 5 7 , 6 8) but preferably further, it is definitely not a good idea to have them on the same channel. BTW Check your countries wireless regulation a couple of EU states have some restrictions on what channels can be used. You do not state the make of printer or the distance between printer and the box you wish to connect to. Some printer have Bluetooth support or can be upgraded with a WiFi card this may provide an alternative option. It is possibled to setup a wireless bridge but this is usually only possible with two devices from the same manufacturer which have support for that manufacturers bridging technology (I am running a netgear wifi bridge based setup myself). You will probably be able to do this if one or other of the manufacturers of your current APs supplies an AP with bridge support that can be connected to by cable to the other manufacturers router. Finally, there are wireless print servers available. - -- ============================================================================== I have always wished that my computer would be as easy to use as my telephone. My wish has come true. I no longer know how to use my telephone. Bjarne Stroustrup ============================================================================== -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFG28yvasN0sSnLmgIRArwlAKDfRidkHYyyiqUuJRuixNKnwn/rXgCgnrt/ HY4wWtRWX8cr28n+VC/OQqw= =uN8U -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sep 2 2007 17:37, Adolph Weidanz wrote:
Now I found a couple of ideas on how to do it: I set the linksys to 192.168.1.2, both the routers are on channel 1. One place I've run into problems is that the howtos I've found all say that the essid's have to be different. So say, the dlink's essid is route1, and linksys is route2. The problem with this is the network card setup requires an essid in order to use WEP. If I use route1 then it can't see route2.
The easiest way to do it is to buy a second wireless card and set the linksys as 192.168.0.1, but I would rather get it to work without the this way.
Any ideas be appreciated...
I know of the rt2500 2.x driver which does provide a wmaster0 interface of which more interfaces can be cloned so as to log into multiple ESSIDs. Never tried it though. Jan -- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sep 2 2007 17:37, Adolph Weidanz wrote:
Now I found a couple of ideas on how to do it: I set the linksys to 192.168.1.2, both the routers are on channel 1. One place I've run into problems is that the howtos I've found all say that the essid's have to be different. So say, the dlink's essid is route1, and linksys is route2. The problem with this is the network card setup requires an essid in order to use WEP. If I use route1 then it can't see route2.
The easiest way to do it is to buy a second wireless card and set the linksys as 192.168.0.1, but I would rather get it to work without the this way.
Any ideas be appreciated...
I know of the rt2500 2.x driver which does provide a wmaster0 interface of which more interfaces can be cloned so as to log into multiple ESSIDs. Never tried it though.
Jan Well... I gave it up and just rearranged things so the printer hooked to
Jan Engelhardt wrote: the main router... -- Quis custodiet ipsos custodes “To announce that there must be no criticism of the president, or that we are to stand by the president, right or wrong, is not only unpatriotic and servile, but is morally treasonable to the American public.” [Theodore Roosevelt] 1918 Adolph & Sharon Weidanz SuSE 10.1 '78 43' Endeavour Ketch Folding@Home Team 45 S/V Time To Paws -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (4)
-
Adolph & Sharon Weidanz -
Adolph Weidanz
-
G T Smith -
Jan Engelhardt