[opensuse] 10.2 raid drive issue
Upgraded a working SuSE 9.3 system to 10.2 (fresh install). System is HP with integrated Netraid, running raid level 5. All went well, but during boot I see a lot of these errors: <6> sdc:<6>attempt to access beyond end of device <6>attempt to access beyond end of device <6>sdb: rw=0, want=71119511, limit=35566480 <3>Buffer I/O error on device sdb2, logical block 851200 After 10 minutes or so the system will boot and seems to run normally. If the raid is set up properly there should only be one disk "sda", however during boot is tries to access "sdb/sdc". Could this be a problem with grub, megaraid driver? I never saw this issue using 9.3. Any help trying to locate the root of this problem would be appreciated. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Friday 2007-04-27 at 15:36 -0400, Coach-X wrote:
If the raid is set up properly there should only be one disk "sda", however during boot is tries to access "sdb/sdc". Could this be a problem with grub, megaraid driver? I never saw this issue using 9.3.
It seems the system tries to access it first as a software raid, or even not raid. I saw (in the Spanish list) another report of someone having problems also because his systems attempts software raid, too. I don't know of a solution. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGMxt8tTMYHG2NR9URApyCAKCKd/IoSmMS3HgwibKnG9VboF+PFQCgklzG tw2PXYE5RKPwJFVqShwOklw= =5w6P -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Hello,
On Fri, 27 Apr 2007 15:36:51 -0400
Coach-X
Upgraded a working SuSE 9.3 system to 10.2 (fresh install). System is HP with integrated Netraid, running raid level 5. All went well, but during boot I see a lot of these errors:
<6> sdc:<6>attempt to access beyond end of device <6>attempt to access beyond end of device <6>sdb: rw=0, want=71119511, limit=35566480 <3>Buffer I/O error on device sdb2, logical block 851200
After 10 minutes or so the system will boot and seems to run normally.
If the raid is set up properly there should only be one disk "sda", however during boot is tries to access "sdb/sdc". Could this be a problem with grub, megaraid driver? I never saw this issue using 9.3.
Any help trying to locate the root of this problem would be appreciated.
Did you try fsck? Thanks, eshsf -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sat, 28 Apr 2007 19:53:46 +0900
eshsf
Hello,
On Fri, 27 Apr 2007 15:36:51 -0400 Coach-X
wrote: Upgraded a working SuSE 9.3 system to 10.2 (fresh install). System is HP with integrated Netraid, running raid level 5. All went well, but during boot I see a lot of these errors:
<6> sdc:<6>attempt to access beyond end of device <6>attempt to access beyond end of device <6>sdb: rw=0, want=71119511, limit=35566480 <3>Buffer I/O error on device sdb2, logical block 851200
After 10 minutes or so the system will boot and seems to run normally.
If the raid is set up properly there should only be one disk "sda", however during boot is tries to access "sdb/sdc". Could this be a problem with grub, megaraid driver? I never saw this issue using 9.3.
Any help trying to locate the root of this problem would be appreciated.
Did you try fsck?
Hmm... I made a mistake. it's irrelevant to fsck. Maybe you should report to bugzilla. Thanks, eshsf -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (3)
-
Carlos E. R.
-
Coach-X
-
eshsf