I did not think the Cisco VPN client is 64bit. -------------------------------------------------------------------------------------------------------------------------------------------------------------------- This e-mail message (including attachments, if any) is intended for the use of the individual or entity to which it is addressed and may contain information that is privileged, proprietary , confidential and exempt from disclosure. If you are not the intended recipient, you are notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender and erase this e-mail message immediately. -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Le present message electronique (y compris les pieces qui y sont annexees, le cas echeant) s'adresse au destinataire indique et peut contenir des renseignements de caractere prive ou confidentiel. Si vous n'etes pas le destinataire de ce document, nous vous signalons qu'il est strictement interdit de le diffuser, de le distribuer ou de le reproduire. Si ce message vous a ete transmis par erreur, veuillez en informer l'expediteur et le supprimer immediatement. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Also, I have downloaded the 4.8 version from: http://system.cs.fsu.edu/selfhelp/vpninfo/ And when installing The 4.8 VPN Client on Open SUSE 64bit I get the following messages: ************** Linux:/home/VPN/vpnclient # ./vpn_install Cisco Systems VPN Client Version 4.8.00 (0440) Linux Installer Copyright (C) 1998-2005 Cisco Systems, Inc. All Rights Reserved. By installing this product you agree that you have read the license.txt file (The VPN Client license) and will comply with its terms. Directory where binaries will be installed [/usr/local/bin] Automatically start the VPN service at boot time [yes]yes In order to build the VPN kernel module, you must have the kernel headers for the version of the kernel you are running. Directory containing linux kernel source code [/lib/modules/2.6.15-git12-6-default/build]/usr/src/linux * Binaries will be installed in "/usr/local/bin". * Modules will be installed in "/lib/modules/2.6.15-git12-6-default/CiscoVPN". * The VPN service will be started AUTOMATICALLY at boot time. * Kernel source from "/usr/src/linux" will be used to build the module. Is the above correct [y]y Making module make -C /usr/src/linux SUBDIRS=/home/VPN/vpnclient modules make[1]: Entering directory `/usr/src/linux-2.6.15-git12-6' CC [M] /home/VPN/vpnclient/linuxcniapi.o In file included from /home/VPN/vpnclient/Cniapi.h:15, from /home/VPN/vpnclient/linuxcniapi.c:27: /home/VPN/vpnclient/GenDefs.h:110:2: warning: #warning 64 bit /home/VPN/vpnclient/linuxcniapi.c: In function ?CniInjectReceive?: /home/VPN/vpnclient/linuxcniapi.c:292: error: ?struct sk_buff? has no member named ?stamp? /home/VPN/vpnclient/linuxcniapi.c: In function ?CniInjectSend?: /home/VPN/vpnclient/linuxcniapi.c:432: error: ?struct sk_buff? has no member named ?stamp? make[2]: *** [/home/VPN/vpnclient/linuxcniapi.o] Error 1 make[1]: *** [_module_/home/VPN/vpnclient] Error 2 make[1]: Leaving directory `/usr/src/linux-2.6.15-git12-6' make: *** [default] Error 2 Failed to make module "cisco_ipsec.ko" *********** Also, I have tried modifying "linuxcniapi.c" in the VPN_client install directory: http://jason.roysdon.net/?p=754 ftp://jason.roysdon.net/pub/jroysdon/cisco/vpnclient-linux-4.7.00.0640-k9_ke rnel-2.6.14-1.1637_FC4.patch http://www.redhat.com/archives/fedora-list/2005-November/msg02105.html And now I get the following result: *********** # ./vpn_install Cisco Systems VPN Client Version 4.8.00 (0440) Linux Installer Copyright (C) 1998-2005 Cisco Systems, Inc. All Rights Reserved. By installing this product you agree that you have read the license.txt file (The VPN Client license) and will comply with its terms. Directory where binaries will be installed [/usr/local/bin] Automatically start the VPN service at boot time [yes]yes In order to build the VPN kernel module, you must have the kernel headers for the version of the kernel you are running. Directory containing linux kernel source code [/lib/modules/2.6.15-git12-6-default/build]/usr/src/linux * Binaries will be installed in "/usr/local/bin". * Modules will be installed in "/lib/modules/2.6.15-git12-6-default/CiscoVPN". * The VPN service will be started AUTOMATICALLY at boot time. * Kernel source from "/usr/src/linux" will be used to build the module. Is the above correct [y]y Making module make -C /usr/src/linux SUBDIRS=/home/VPN/vpnclient modules make[1]: Entering directory `/usr/src/linux-2.6.15-git12-6' WARNING: Symbol version dump /usr/src/linux-2.6.15-git12-6/Module.symvers is missing; modules will have no dependencies and modversions. CC [M] /home/VPN/vpnclient/linuxcniapi.o In file included from /home/VPN/vpnclient/Cniapi.h:15, from /home/VPN/vpnclient/linuxcniapi.c:27: /home/VPN/vpnclient/GenDefs.h:110:2: warning: #warning 64 bit CC [M] /home/VPN/vpnclient/frag.o In file included from /home/VPN/vpnclient/Cniapi.h:15, from /home/VPN/vpnclient/frag.c:16: /home/VPN/vpnclient/GenDefs.h:110:2: warning: #warning 64 bit CC [M] /home/VPN/vpnclient/IPSecDrvOS_linux.o In file included from /home/VPN/vpnclient/IPSecDrvOS_linux.c:20: /home/VPN/vpnclient/GenDefs.h:110:2: warning: #warning 64 bit CC [M] /home/VPN/vpnclient/interceptor.o In file included from /home/VPN/vpnclient/Cniapi.h:15, from /home/VPN/vpnclient/interceptor.c:30: /home/VPN/vpnclient/GenDefs.h:110:2: warning: #warning 64 bit /home/VPN/vpnclient/interceptor.c: In function ?handle_vpnup?: /home/VPN/vpnclient/interceptor.c:310: warning: assignment from incompatible pointer type /home/VPN/vpnclient/interceptor.c:334: warning: assignment from incompatible pointer type /home/VPN/vpnclient/interceptor.c:335: warning: assignment from incompatible pointer type /home/VPN/vpnclient/interceptor.c: In function ?do_cleanup?: /home/VPN/vpnclient/interceptor.c:378: warning: assignment from incompatible pointer type CC [M] /home/VPN/vpnclient/linuxkernelapi.o /home/VPN/vpnclient/linuxkernelapi.c: In function ?kernel_alloc?: /home/VPN/vpnclient/linuxkernelapi.c:12: warning: format ?%d? expects type ?int?, but argument 2 has type ?size_t? LD [M] /home/VPN/vpnclient/cisco_ipsec.o Building modules, stage 2. MODPOST /bin/sh: scripts/mod/modpost: No such file or directory make[2]: *** [__modpost] Error 127 make[1]: *** [modules] Error 2 make[1]: Leaving directory `/usr/src/linux-2.6.15-git12-6' make: *** [default] Error 2 Failed to make module "cisco_ipsec.ko". ***********
On Mon, 2006-01-30 at 13:45 -0600, Arash Jalali wrote:
Also, I have downloaded the 4.8 version from:
http://system.cs.fsu.edu/selfhelp/vpninfo/
And when installing The 4.8 VPN Client on Open SUSE 64bit I get the following messages:
<snip>
make: *** [default] Error 2 Failed to make module "cisco_ipsec.ko"
***********
Did you remember to (as root): cd /usr/src/linux make cloneconfig make prepare-all prior to trying to make the Cisco module? -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998
Yes I have run the following makes before the vpn_install: su - cd /usr/src/linux make mrproper make cloneconfig make prepare-all Also, when I run the vpn_install for the second time I only see the following messages: ******* Directory containing linux kernel source code [/lib/modules/2.6.15-git12-6-default/build]/usr/src/linux * Binaries will be installed in "/usr/local/bin". * Modules will be installed in "/lib/modules/2.6.15-git12-6-default/CiscoVPN". * The VPN service will be started AUTOMATICALLY at boot time. * Kernel source from "/usr/src/linux" will be used to build the module. Is the above correct [y]y Making module make -C /usr/src/linux SUBDIRS=/home/VPN/vpnclient modules make[1]: Entering directory `/usr/src/linux-2.6.15-git12-6' WARNING: Symbol version dump /usr/src/linux-2.6.15-git12-6/Module.symvers is missing; modules will have no dependencies and modversions. Building modules, stage 2. MODPOST /bin/sh: scripts/mod/modpost: No such file or directory make[2]: *** [__modpost] Error 127 make[1]: *** [modules] Error 2 make[1]: Leaving directory `/usr/src/linux-2.6.15-git12-6' make: *** [default] Error 2 Failed to make module "cisco_ipsec.ko". linux:/home/VPN/vpnclient # ******* If I remove the vpnclient directory and re-extract the vpn client files and apply the patch I receive the completed messages as the last section on the previous email.
participants (3)
-
Arash Jalali -
Frank.Pikelner＠blue-dot.ca -
Kenneth Schneider