Ok this is complaining about your ZIP drive right ? If it is not ncessary at the time being you may want to disconnect it until the core of the problem is reached.

I keep it connected to occasionaly check that the SCSI card is working OK. But have tried it both connected and disconnected. The scanner then moves to /dev/sg3 and is detected as such by both YAST1 and xsane. I have also tried just loading the aha152x module on it's own, and even unplugging the DC2976 SCSI card, but still nothing! <snip>

Do you use Suse kernel or self compiled with ide-scsi being compiled in the kernel not as module( I had a problem with self compiled kernel where I had the similar problem the scanner and thge scsi was frozen). If that is not the case try running the scanner when ide-scsi is not loaded to the memory.

I use the stock SuSE kernel and modules. I too had problems with compiling ide-scsi modules before and have stuck to the stock kernel since. My problem was accessing a SCSI device would hang the system completely.

The last thing are you running xsane as root if as a normal user then is the use member of the disk group

Running xsane as root, with "xhost +localhost" typed in my console. Don't want to add user permission until it works!

Hope you may come out with the solution you seek for

So do I! Thanks for your help anyway. I include this time the output from xsane with the debug environment setting set to 128. It's a bit long but maybe someone can see what's going on from the output. RikD. ---------------------------------------------------------------- setting the DEBUG (SANE_DEBUG_SANEI_SCSI) level to 128 for SANE gives on loading: [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 16384 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80c82b8 [sanei_scsi] sanei_scsi.issue: 0x80c82b8 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c82b8 [sanei_scsi] sanei_scsi.issue: 0x80c82b8 [sanei_scsi] sanei_scsi_req_wait: read 41 bytes [sanei_scsi] scsi_req_enter: entered 0x80c82b8 [sanei_scsi] sanei_scsi.issue: 0x80c82b8 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c82b8 [sanei_scsi] sanei_scsi.issue: 0x80c82b8 [sanei_scsi] sanei_scsi_req_wait: read 132 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80c4458 [sanei_scsi] sanei_scsi.issue: 0x80c4458 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c4458 [sanei_scsi] sanei_scsi.issue: 0x80c4458 [sanei_scsi] sanei_scsi_req_wait: read 132 bytes [sanei_scsi] scsi_req_enter: entered 0x80c4458 [sanei_scsi] sanei_scsi.issue: 0x80c4458 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c4458 [sanei_scsi] sanei_scsi.issue: 0x80c4458 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80c4c50 [sanei_scsi] sanei_scsi.issue: 0x80c4c50 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c4c50 [sanei_scsi] sanei_scsi.issue: 0x80c4c50 [sanei_scsi] sanei_scsi_req_wait: read 72 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/sga' failed: No such file or directory[sanei_init_debug]: Setting debug level of s anei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 4096 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80c5a18 [sanei_scsi] sanei_scsi.issue: 0x80c5a18 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c5a18 [sanei_scsi] sanei_scsi.issue: 0x80c5a18 [sanei_scsi] sanei_scsi_req_wait: read 72 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80c5ff0 [sanei_scsi] sanei_scsi.issue: 0x80c5ff0 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c5ff0 [sanei_scsi] sanei_scsi.issue: 0x80c5ff0 [sanei_scsi] sanei_scsi_req_wait: read 91 bytes [sanei_scsi] scsi_req_enter: entered 0x80c5ff0 [sanei_scsi] sanei_scsi.issue: 0x80c5ff0 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c5ff0 [sanei_scsi] sanei_scsi.issue: 0x80c5ff0 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80c6508 [sanei_scsi] sanei_scsi.issue: 0x80c6508 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c6508 [sanei_scsi] sanei_scsi.issue: 0x80c6508 [sanei_scsi] sanei_scsi_req_wait: read 124 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80c7010 [sanei_scsi] sanei_scsi.issue: 0x80c7010 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c7010 [sanei_scsi] sanei_scsi.issue: 0x80c7010 [sanei_scsi] sanei_scsi_req_wait: read 132 bytes [sanei_scsi] scsi_req_enter: entered 0x80c7010 [sanei_scsi] sanei_scsi.issue: 0x80c7010 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c7010 [sanei_scsi] sanei_scsi.issue: 0x80c7010 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] searched device is /dev/sg4 [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80c8820 [sanei_scsi] sanei_scsi.issue: 0x80c8820 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c8820 [sanei_scsi] sanei_scsi.issue: 0x80c8820 [sanei_scsi] sanei_scsi_req_wait: read 41 bytes [sanei_scsi] scsi_req_enter: entered 0x80c8820 [sanei_scsi] sanei_scsi.issue: 0x80c8820 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c8820 [sanei_scsi] sanei_scsi.issue: 0x80c8820 [sanei_scsi] sanei_scsi_req_wait: read 132 bytes [sanei_scsi] searched device is /dev/sg4 [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80c8820 [sanei_scsi] sanei_scsi.issue: 0x80c8820 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c8820 [sanei_scsi] sanei_scsi.issue: 0x80c8820 [sanei_scsi] sanei_scsi_req_wait: read 41 bytes [sanei_scsi] scsi_req_enter: entered 0x80c8820 [sanei_scsi] sanei_scsi.issue: 0x80c8820 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c8820 [sanei_scsi] sanei_scsi.issue: 0x80c8820 [sanei_scsi] sanei_scsi_req_wait: read 132 bytes [sanei_scsi] sanei_scsi_open: open of `option dump 1' failed: No such file or directory[sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] searched device is /dev/sg4 [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80c8ee8 [sanei_scsi] sanei_scsi.issue: 0x80c8ee8 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c8ee8 [sanei_scsi] sanei_scsi.issue: 0x80c8ee8 [sanei_scsi] sanei_scsi_req_wait: read 132 bytes [sanei_scsi] searched device is /dev/sg4 [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80c8fb0 [sanei_scsi] sanei_scsi.issue: 0x80c8fb0 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80c8fb0 [sanei_scsi] sanei_scsi.issue: 0x80c8fb0 [sanei_scsi] sanei_scsi_req_wait: read 132 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80cdb18 [sanei_scsi] sanei_scsi.issue: 0x80cdb18 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80cdb18 [sanei_scsi] sanei_scsi.issue: 0x80cdb18 [sanei_scsi] sanei_scsi_req_wait: read 72 bytes [sanei_scsi] scsi_req_enter: entered 0x80cdb18 [sanei_scsi] sanei_scsi.issue: 0x80cdb18 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80cdb18 [sanei_scsi] sanei_scsi.issue: 0x80cdb18 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80de900 [sanei_scsi] sanei_scsi.issue: 0x80de900 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80de900 [sanei_scsi] sanei_scsi.issue: 0x80de900 [sanei_scsi] sanei_scsi_req_wait: read 72 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80ce800 [sanei_scsi] sanei_scsi.issue: 0x80ce800 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80ce800 [sanei_scsi] sanei_scsi.issue: 0x80ce800 [sanei_scsi] sanei_scsi_req_wait: read 72 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80cf028 [sanei_scsi] sanei_scsi.issue: 0x80cf028 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80cf028 [sanei_scsi] sanei_scsi.issue: 0x80cf028 [sanei_scsi] sanei_scsi_req_wait: read 132 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80cf798 [sanei_scsi] sanei_scsi.issue: 0x80cf798 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80cf798 [sanei_scsi] sanei_scsi.issue: 0x80cf798 [sanei_scsi] sanei_scsi_req_wait: read 132 bytes [sanei_scsi] scsi_req_enter: entered 0x80cf798 [sanei_scsi] sanei_scsi.issue: 0x80cf798 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80cf798 [sanei_scsi] sanei_scsi.issue: 0x80cf798 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80cff50 [sanei_scsi] sanei_scsi.issue: 0x80cff50 [sanei_scsi] sanei_scsi_req_wait: read 132 bytes [sanei_scsi] scsi_req_enter: entered 0x80cff50 [sanei_scsi] sanei_scsi.issue: 0x80cff50 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80cff50 [sanei_scsi] sanei_scsi.issue: 0x80cff50 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80d0710 [sanei_scsi] sanei_scsi.issue: 0x80d0710 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80d0710 [sanei_scsi] sanei_scsi.issue: 0x80d0710 [sanei_scsi] sanei_scsi_req_wait: read 91 bytes [sanei_scsi] scsi_req_enter: entered 0x80d0710 [sanei_scsi] sanei_scsi.issue: 0x80d0710 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80d0710 [sanei_scsi] sanei_scsi.issue: 0x80d0710 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x80d0ef0 [sanei_scsi] sanei_scsi.issue: 0x80d0ef0 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80d0ef0 [sanei_scsi] sanei_scsi.issue: 0x80d0ef0 [sanei_scsi] sanei_scsi_req_wait: read 132 bytes [sanei_scsi] scsi_req_enter: entered 0x80d0ef0 [sanei_scsi] sanei_scsi.issue: 0x80d0ef0 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x80d0ef0 [sanei_scsi] sanei_scsi.issue: 0x80d0ef0 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes And when aquiring a preview [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20138 [sanei_scsi] sanei_scsi_open_extended: using 32768 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [sanei_scsi] scsi_req_enter: entered 0x8154628 [sanei_scsi] sanei_scsi.issue: 0x8154628 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x8154628 [sanei_scsi] sanei_scsi.issue: 0x8154628 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes [sanei_scsi] scsi_req_enter: entered 0x8154628 [sanei_scsi] sanei_scsi.issue: 0x8154628 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x8154628 [sanei_scsi] sanei_scsi.issue: 0x8154628 [sanei_scsi] sanei_scsi_req_wait: read 55 bytes [sanei_scsi] scsi_req_enter: entered 0x8154628 [sanei_scsi] sanei_scsi.issue: 0x8154628 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x8154628 [sanei_scsi] sanei_scsi.issue: 0x8154628 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes [sanei_scsi] sanei_scsi_req_wait: SCSI command complained: Success -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq