I do not have audio from my VMWare 4.5.2 Host: SuSE Linux 9.1 - 2.6.5-7.151-default Guest: WinXP Pro. Suggestions? Janus -- Roskilde University, Denmark. Department of Technology and Social Science. International Development Studies. ESST - Society, Science and Technology in Europe.
On Thu, 5 May 2005 15:36:47 +0200, you wrote:
I do not have audio from my VMWare 4.5.2 Host: SuSE Linux 9.1 - 2.6.5-7.151-default Guest: WinXP Pro.
Suggestions?
Upgrade everything? VMware sound didn't work properly previous to VMware 5.0 (reproduced by VMware support), and I (personally) never did manage to get system sounds to work consistantly until SuSE 9.3. Mike- -- Mornings: Evolution in action. Only the grumpy will survive. -- Please note - Due to the intense volume of spam, we have installed site-wide spam filters at catherders.com. If email from you bounces, try non-HTML, non-encoded, non-attachments.
On Thu, 2005-05-05 at 10:23 -0400, Michael W Cocke wrote:
On Thu, 5 May 2005 15:36:47 +0200, you wrote:
I do not have audio from my VMWare 4.5.2 Host: SuSE Linux 9.1 - 2.6.5-7.151-default Guest: WinXP Pro.
Suggestions?
Upgrade everything? VMware sound didn't work properly previous to VMware 5.0 (reproduced by VMware support), and I (personally) never did manage to get system sounds to work consistantly until SuSE 9.3.
Mike-
As long as VMWare tools are installed I've had no trouble with sound and VMWare 4.5.2 under SuSE 9.2. The key thing, I've found, is that if you use Gnome and startup using the sound server or you're playing music or something in the host OS, then the guest OS can't share the sound device and thus sound won't work. Turn off the app hogging /dev/dsp (in my case), such as Gaim or XMMS and the guest OS sound works. That's been my experience. Preston
On Thursday 05 May 2005 16:33, Preston Crawford wrote:
As long as VMWare tools are installed I've had no trouble with sound and VMWare 4.5.2 under SuSE 9.2. The key thing, I've found, is that if you use Gnome and startup using the sound server or you're playing music or something in the host OS, then the guest OS can't share the sound device and thus sound won't work. Turn off the app hogging /dev/dsp (in my case), such as Gaim or XMMS and the guest OS sound works.
That's been my experience.
That depends on which sound card you have. If you have a card capable of handling multiple threads, such SBLive! or newer, it should work anyway. For other cards, if you start the program with esddsp <program name> for gnome, or artsdsp <program name> if you're running KDE, and the sound output will be routed through the sound daemon and you should get nice multiplexed sound from multiple applications
On Thu, 2005-05-05 at 16:39 +0200, Anders Johansson wrote:
On Thursday 05 May 2005 16:33, Preston Crawford wrote:
As long as VMWare tools are installed I've had no trouble with sound and VMWare 4.5.2 under SuSE 9.2. The key thing, I've found, is that if you use Gnome and startup using the sound server or you're playing music or something in the host OS, then the guest OS can't share the sound device and thus sound won't work. Turn off the app hogging /dev/dsp (in my case), such as Gaim or XMMS and the guest OS sound works.
That's been my experience.
That depends on which sound card you have. If you have a card capable of handling multiple threads, such SBLive! or newer, it should work anyway.
You're right, actually. I have only had VMWare since putting together my new computer (which uses an on-board Intel faux audio card).
For other cards, if you start the program with
esddsp <program name>
for gnome, or
artsdsp <program name>
if you're running KDE, and the sound output will be routed through the sound daemon and you should get nice multiplexed sound from multiple applications
That's good to know. For the original poster especially. Either way I've found the short term solution to be just to kill the offending app and not worry about it. Not entirely elegant, but I don't use sound much in VMWare. Only when I want to watch a movie trailer I can't watch in the host or something like that. Otherwise, VMWare's purpose in my life is the following... #1 - Developing ASP.NET apps (which is also done under Mono, but is sometimes less flakey under Windows) #2 - Allowing my wife to sync her training software with her Palm (she's a triathlete) Otherwise I would probably contribute VMWare to someone, same with Windows. But #2 is the sticky point. :-) The wife needs her Palm software that syncs with a Windows-based client. Preston
On Thursday 05 May 2005 16:39, Anders Johansson wrote:
That depends on which sound card you have. If you have a card capable of handling multiple threads, such SBLive! or newer, it should work anyway.
I have some build in sound card on my motherboard - a Asus P4P800-VM: http://uk.asus.com/products.aspx?l1=3&l2=12&l3=33&model=184&modelmenu=1
For other cards, if you start the program with esddsp <program name> for gnome, or artsdsp <program name> if you're running KDE, and the sound output will be routed through the sound daemon and you should get nice multiplexed sound from multiple applications
Thank you, but I am not sure I understand - which program do you want me to run with the artsdsp prefix? I am running Linux as my primary OS and my guestOS is WinXP. Please spell it our for me. :-) Janus -- Roskilde University, Denmark. Department of Technology and Social Science. International Development Studies. ESST - Society, Science and Technology in Europe.
Quoting Janus Sandsgaard
On Thursday 05 May 2005 16:39, Anders Johansson wrote:
That depends on which sound card you have. If you have a card capable of handling multiple threads, such SBLive! or newer, it should work anyway.
I have some build in sound card on my motherboard - a Asus P4P800-VM: http://uk.asus.com/products.aspx?l1=3&l2=12&l3=33&model=184&modelmenu=1
For other cards, if you start the program with esddsp <program name> for gnome, or artsdsp <program name> if you're running KDE, and the sound output will be routed through the sound daemon and you should get nice multiplexed sound from multiple applications
Thank you, but I am not sure I understand - which program do you want me to run with the artsdsp prefix? I am running Linux as my primary OS and my guestOS is WinXP. Please spell it our for me. :-)
artsdsp vmware That should get it to work.
Janus
-- Roskilde University, Denmark. Department of Technology and Social Science. International Development Studies. ESST - Society, Science and Technology in Europe.
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
On Thursday 05 May 2005 20:07, RK Davies wrote:
artsdsp vmware That should get it to work.
I get this: janus@leika:~> artsdsp vmware artsdsp works only for binaries janus@leika:~> What am I doing wrong? Janus -- Roskilde University, Denmark. Department of Technology and Social Science. International Development Studies. ESST - Society, Science and Technology in Europe.
participants (5)
-
Anders Johansson
-
Janus Sandsgaard
-
Michael W Cocke
-
Preston Crawford
-
RK Davies