[opensuse] Inoperative Intel 945G open GL
Hi, I'm trying to get 3D support with Intel 945G onboard graphics. I've enabled it in sax, and 3Ddiag says all is correct but I cannot run GL-117 nor any open gl screen savers. 3Ddiag's output is :- 3Ddiag version 0.742 Verifying 3D configuration: Using 3dinfo ************************************************************ Verifying 3D configuration for 3D board "Intel Corporation 945G (8086@2772)": Tests for X.Org configuration: Config File /etc/X11/xorg.conf ... done. Driver ... done. Extensions ... done. Options ... done. Checking GL/GLU/glut runtime configuration: GL/GLU ... done (package Mesa) glut ... done (package freeglut) and my xorg.conf minus fonts is:- Section "ServerFlags" Option "AIGLX" "on" Option "AllowMouseOpenFail" "on" Option "ZapWarning" "on" EndSection Section "Module" Load "dbe" Load "type1" Load "freetype" Load "extmod" Load "glxdbe" Load "type1" Load "freetype" Load "extmod" Load "glx" Load "dri" EndSection Section "InputDevice" Driver "kbd" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "us" Option "XkbModel" "microsoftpro" Option "XkbRules" "xfree86" EndSection Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "5" Option "Device" "/dev/input/mice" Option "Name" "Elan Microelectronics PS/2+USB Mouse" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Option "CalcAlgorithm" "XServerPool" DisplaySize 317 254 HorizSync 30-72 Identifier "Monitor[0]" ModelName "MONITOR" Option "DPMS" Option "PreferredMode" "1152x864" VendorName "___" VertRefresh 50-160 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1024x768" 78 1024 1040 1136 1312 768 769 772 800 +hsync +vsync EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1152x864" "1024x768" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1152x864" "1024x768" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1152x864" "1024x768" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1152x864" "1024x768" "1024x600" "800x600" "768x576" "640x480" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Device" BoardName "945G" BusID "0:2:0" Driver "intel" Identifier "Device[0]" Option "monitor-VGA" "Monitor[0]" VendorName "Intel" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" EndSection Section "DRI" Group "video" Mode 0660 EndSection Section "Extensions" Option "Composite" "on" EndSection Any help appreciated. Thanks Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sunday 27 April 2008 06:25:26 am Dave Plater wrote:
Hi, I'm trying to get 3D support with Intel 945G onboard graphics. I've enabled it in sax, and 3Ddiag says all is correct but I cannot run GL-117 nor any open gl screen savers. 3Ddiag's output is :- 3Ddiag version 0.742 Verifying 3D configuration: Using 3dinfo ************************************************************
Verifying 3D configuration for 3D board "Intel Corporation 945G (8086@2772)":
Tests for X.Org configuration: Config File /etc/X11/xorg.conf ... done. Driver ... done. Extensions ... done. Options ... done.
Checking GL/GLU/glut runtime configuration: GL/GLU ... done (package Mesa) glut ... done (package freeglut)
and my xorg.conf minus fonts is:-
Section "ServerFlags" Option "AIGLX" "on" Option "AllowMouseOpenFail" "on" Option "ZapWarning" "on" EndSection
Section "Module" Load "dbe" Load "type1" Load "freetype" Load "extmod" Load "glxdbe" Load "type1" Load "freetype" Load "extmod" Load "glx" Load "dri" EndSection
Section "InputDevice" Driver "kbd" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "us" Option "XkbModel" "microsoftpro" Option "XkbRules" "xfree86" EndSection
Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "5" Option "Device" "/dev/input/mice" Option "Name" "Elan Microelectronics PS/2+USB Mouse" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection
Section "Monitor" Option "CalcAlgorithm" "XServerPool" DisplaySize 317 254 HorizSync 30-72 Identifier "Monitor[0]" ModelName "MONITOR" Option "DPMS" Option "PreferredMode" "1152x864" VendorName "___" VertRefresh 50-160 UseModes "Modes[0]" EndSection
Section "Modes" Identifier "Modes[0]" Modeline "1024x768" 78 1024 1040 1136 1312 768 769 772 800 +hsync +vsync EndSection
Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1152x864" "1024x768" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1152x864" "1024x768" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1152x864" "1024x768" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1152x864" "1024x768" "1024x600" "800x600" "768x576" "640x480" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection
Section "Device" BoardName "945G" BusID "0:2:0" Driver "intel" Identifier "Device[0]" Option "monitor-VGA" "Monitor[0]" VendorName "Intel" EndSection
Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" EndSection
Section "DRI" Group "video" Mode 0660 EndSection
Section "Extensions" Option "Composite" "on" EndSection
Any help appreciated. Thanks Dave P
What version of Intel Drivers are you running? I would HIGHLY HIGHLY recommend updating using the Xorg repository [1]. This will update your Intel driver to the latest and may help with your issue. [1] http://download.opensuse.org/repositories/X11:/XOrg/openSUSE_10.3/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Ben Kevan wrote:
On Sunday 27 April 2008 06:25:26 am Dave Plater wrote:
Hi, I'm trying to get 3D support with Intel 945G onboard graphics. I've enabled it in sax, and 3Ddiag says all is correct but I cannot run GL-117 nor any open gl screen savers. 3Ddiag's output is :- 3Ddiag version 0.742 Verifying 3D configuration: Using 3dinfo ************************************************************
Verifying 3D configuration for 3D board "Intel Corporation 945G (8086@2772)":
Tests for X.Org configuration: Config File /etc/X11/xorg.conf ... done. Driver ... done. Extensions ... done. Options ... done.
Checking GL/GLU/glut runtime configuration: GL/GLU ... done (package Mesa) glut ... done (package freeglut)
What version of Intel Drivers are you running? I would HIGHLY HIGHLY recommend updating using the Xorg repository [1]. This will update your Intel driver to the latest and may help with your issue.
[1] http://download.opensuse.org/repositories/X11:/XOrg/openSUSE_10.3/ Drivers all up to date (I'm used to nvidia doing it all for me) and I have two driver modules called intel loaded and if it's any help here's the output from glxgears:- Arbuthnot:/home/davepl # glxgears -info -v Window x=0, y=0, width=300, height=300 Xlib: extension "GLX" missing on display ":0.0". glxgears: Error: couldn't get an RGB, Double-buffered visual. I can remember seeing something about Intel 945G in a thread before but I can't find anything useful in archives. Regards Dave P
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Dave Plater wrote:
Hi, I'm trying to get 3D support with Intel 945G onboard graphics. I've enabled it in sax, and 3Ddiag says all is correct but I cannot run GL-117 nor any open gl screen savers. 3Ddiag's output is :- 3Ddiag version 0.742 Verifying 3D configuration: Using 3dinfo ...
Are you part of the "video" group ? -- Rui Santos http://www.ruisantos.com/ Veni, vidi, Linux! -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Rui Santos wrote:
Dave Plater wrote:
Hi, I'm trying to get 3D support with Intel 945G onboard graphics. I've enabled it in sax, and 3Ddiag says all is correct but I cannot run GL-117 nor any open gl screen savers. 3Ddiag's output is :- 3Ddiag version 0.742 Verifying 3D configuration: Using 3dinfo ...
Are you part of the "video" group ?
Yes Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Dave Plater wrote:
Rui Santos wrote:
Dave Plater wrote:
Hi, I'm trying to get 3D support with Intel 945G onboard graphics. I've enabled it in sax, and 3Ddiag says all is correct but I cannot run GL-117 nor any open gl screen savers. 3Ddiag's output is :- 3Ddiag version 0.742 Verifying 3D configuration: Using 3dinfo ...
Are you part of the "video" group ?
Yes Dave P Hi, thanks for help. I uninstalled my previously used nvidia driver, ran sax2 and glxgears now works. For future reference if you switch from nvidia pkg.run file from nvidia you must manually uninstall the driver from runlevel 3 cli use NVIDIA-linux-name of driver-pkg?.run --uninstall then run sax2 and then all is well. Regards Dave P. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (3)
-
Ben Kevan
-
Dave Plater
-
Rui Santos