Hi I have a Belkin 802.11g 54 Mbps Wireless USB Stick, but I'm not sure how to get SUSE 10.0 to recognise it. Can somebody advise please ? Mike
michael norman wrote:
Hi
I have a Belkin 802.11g 54 Mbps Wireless USB Stick, but I'm not sure how to get SUSE 10.0 to recognise it.
Can somebody advise please ?
Take a look at http://www.linuxemporium.co.uk/products/wireless/#pid81766 They claim it's compatible. Regards, -- Jos van Kan registered Linux user #152704
On Sunday 05 March 2006 19:32, Jos van Kan wrote:
michael norman wrote:
Hi
I have a Belkin 802.11g 54 Mbps Wireless USB Stick, but I'm not sure how to get SUSE 10.0 to recognise it.
Can somebody advise please ?
Take a look at http://www.linuxemporium.co.uk/products/wireless/#pid81766
They claim it's compatible.
Regards, -- Jos van Kan registered Linux user #152704
Yes, thats why I got one, but I'm not sure how to set it up to work.
michael norman wrote:
On Sunday 05 March 2006 19:32, Jos van Kan wrote:
michael norman wrote:
Hi
I have a Belkin 802.11g 54 Mbps Wireless USB Stick, but I'm not sure how to get SUSE 10.0 to recognise it.
Can somebody advise please ?
Take a look at http://www.linuxemporium.co.uk/products/wireless/#pid81766
They claim it's compatible.
Regards, -- Jos van Kan registered Linux user #152704
Yes, thats why I got one, but I'm not sure how to set it up to work.
They say: "for the USB model you will have to build the rt2570 driver source (which is included on the CD we provide with your wireless card) against your kernel. SUSE Linux 10.0 has both rt2500 and rt2570 drivers" Since I'm not sure what exactly your problems are, it's kinda hard to be of assistance. If Yast(->Hardware) does not see it at all, look if it is shown by lsusb If not there's something amiss with the usb setup. Regards, -- Jos van Kan registered Linux user #152704
On Monday 06 March 2006 10:44, Jos van Kan wrote:
michael norman wrote:
On Sunday 05 March 2006 19:32, Jos van Kan wrote:
michael norman wrote:
Hi
Since I'm not sure what exactly your problems are, it's kinda hard to be of assistance. If Yast(->Hardware) does not see it at all, look if it is shown by
lsusb
If not there's something amiss with the usb setup.
Regards, -- Jos van Kan registered Linux user #152704
Jos Yast does see it what I cannot work out is which option to use from Yast > network device to configure it with. Mike
michael norman wrote: (How to configure a Balkin Wireless USB stick)
Yast does see it what I cannot work out is which option to use from Yast > network device to configure it with.
My guess would be Yast->Network Devices->Network Cards Probably it won't be recognized and you have to configure it by hand under Others(not recognized). But they *do* have an entry "USB" there, so I suppose that's the route to go. Since I don't have a USB network device I don't have the possibility to check that hypothesis. Regards, -- Jos van Kan registered Linux user #152704
On 3/6/06, Jos van Kan
michael norman wrote:
(How to configure a Balkin Wireless USB stick)
Yast does see it what I cannot work out is which option to use from Yast > network device to configure it with.
My guess would be Yast->Network Devices->Network Cards
Probably it won't be recognized and you have to configure it by hand under Others(not recognized). But they *do* have an entry "USB" there, so I suppose that's the route to go. Since I don't have a USB network device I don't have the possibility to check that hypothesis.
Regards, -- Jos van Kan registered Linux user #152704
Also, after plugging in the device, you may check with dmesg if the kernel recognize it. After that, most probably there will be no drivers for it, so you should try with the windows drivers and ndiswrapper. -- -- Svetoslav Milenov (Sunny)
Sunny wrote:
On 3/6/06, Jos van Kan
wrote: michael norman wrote:
(How to configure a Balkin Wireless USB stick)
Yast does see it what I cannot work out is which option to use from Yast > network device to configure it with.
My guess would be Yast->Network Devices->Network Cards
Probably it won't be recognized and you have to configure it by hand under Others(not recognized). But they *do* have an entry "USB" there, so I suppose that's the route to go. Since I don't have a USB network device I don't have the possibility to check that hypothesis.
Regards, -- Jos van Kan registered Linux user #152704
Also, after plugging in the device, you may check with dmesg if the kernel recognize it. After that, most probably there will be no drivers for it, so you should try with the windows drivers and ndiswrapper.
With all due caveats this appears to be not necessary in this particular instance, because it is genuinely supported by Linux and Suse 10 has the driver. Regards, -- Jos van Kan registered Linux user #152704
On 3/6/06, Jos van Kan
Sunny wrote:
On 3/6/06, Jos van Kan
wrote: michael norman wrote:
(How to configure a Balkin Wireless USB stick)
Yast does see it what I cannot work out is which option to use from Yast > network device to configure it with.
My guess would be Yast->Network Devices->Network Cards
Probably it won't be recognized and you have to configure it by hand under Others(not recognized). But they *do* have an entry "USB" there, so I suppose that's the route to go. Since I don't have a USB network device I don't have the possibility to check that hypothesis.
Regards, -- Jos van Kan registered Linux user #152704
Also, after plugging in the device, you may check with dmesg if the kernel recognize it. After that, most probably there will be no drivers for it, so you should try with the windows drivers and ndiswrapper.
With all due caveats this appears to be not necessary in this particular instance, because it is genuinely supported by Linux and Suse 10 has the driver.
Regards, -- Jos van Kan registered Linux user #152704
This is good to know, as I'm on the market for something like this :) Thanks -- -- Svetoslav Milenov (Sunny)
With all due caveats this appears to be not necessary in this particular instance, because it is genuinely supported by Linux and Suse 10 has the driver.
Regards, -- Jos van Kan registered Linux user #152704
This is good to know, as I'm on the market for something like this :)
Thanks
-- -- Svetoslav Milenov (Sunny)
I know that SUSE 10 has the driver but I have tried every combination I can think of in Yast and I can't get it recognised as yet. I'll have to do some more research.
Problem here is that Belkin has 3 different versions of the stick, but SuSE
10 just knows about 1 of the versions - the ralink based one.
I've actually 2 versions
- the original F5D7050 is a PRISM device which I think
http://prism54.org/has info on getting it to work.
- the second version F5D7050_v2 is as the posts above suggest an ralink
device which works perfectly out of the box with SuSE 10.
As for the 3rd device F5D7050_v3 - I don't have one, so have don't know what
device it's based on - but a google search may help..
If you have it working for windows - the easiest way is to check the program
files/belkin directory for the .sys file. That should help you figure out
what is needed.
Hope that helps
-RikD
On 07/03/06, michael norman
With all due caveats this appears to be not necessary in this
instance, because it is genuinely supported by Linux and Suse 10 has
particular the
driver.
Regards, -- Jos van Kan registered Linux user #152704
This is good to know, as I'm on the market for something like this :)
Thanks
-- -- Svetoslav Milenov (Sunny)
I know that SUSE 10 has the driver but I have tried every combination I can think of in Yast and I can't get it recognised as yet.
I'll have to do some more research.
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
On Tuesday 07 March 2006 11:30 am, Rik Dunphy wrote:
Problem here is that Belkin has 3 different versions of the stick, but SuSE 10 just knows about 1 of the versions - the ralink based one. In my experience, I wouldn't spend money on most everything Belkin makes, except maybe cables. -- Jerry Feldman
Boston Linux and Unix user group http://www.blu.org PGP key id:C5061EA9 PGP Key fingerprint:053C 73EC 3AC1 5C44 3E14 9245 FB00 3ED5 C506 1EA9
On Tuesday 07 March 2006 22:25, Jerry Feldman wrote:
On Tuesday 07 March 2006 11:30 am, Rik Dunphy wrote:
Problem here is that Belkin has 3 different versions of the stick, but SuSE 10 just knows about 1 of the versions - the ralink based one.
In my experience, I wouldn't spend money on most everything Belkin makes, except maybe cables. -- Jerry Feldman
Boston Linux and Unix user group http://www.blu.org PGP key id:C5061EA9 PGP Key fingerprint:053C 73EC 3AC1 5C44 3E14 9245 FB00 3ED5 C506 1EA9
The problem is that the driver is not listed in the selection Yast offers. I can enter it manually and on boot it says its loaded but the device still does not work. I have the equivalent pci card as well and that doesn't work either. I can modprobe both modules (rt2750 and rt2500) successfully so I know the driver is there. Mike
Jerry Feldman wrote:
On Tuesday 07 March 2006 11:30 am, Rik Dunphy wrote:
Problem here is that Belkin has 3 different versions of the stick, but SuSE 10 just knows about 1 of the versions - the ralink based one.
In my experience, I wouldn't spend money on most everything Belkin makes, except maybe cables.
I beg to differ. I have a Belkin wireless router and wlan card and setting them up and getting them to work with Linux was a piece of cake. Router worked out of the box, Card needed ndiswrapper. Lifelong guaranteed though I'm not sure if that's my life or the hardware's. :-) Regards, -- Jos van Kan registered Linux user #152704
participants (5)
-
Jerry Feldman
-
Jos van Kan
-
michael norman
-
Rik Dunphy
-
Sunny