On Thu, 4 Feb 2010 18:24:34 +0100 Marcus Meissner wrote:

Hi folks,

We are currently having difficulties with the 11.2 kernel update, to version 2.6.31.12-0.1.1. <snip> Hi Marcus I've posted this over in the Forum announcement area as well :)

-- Cheers Malcolm °¿° (Linux Counter #276890) SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 2.6.27.42-0.1-default up 20 days 3:55, 4 users, load average: 0.09, 0.08, 0.07 GPU GeForce 8600 GTS Silent - CUDA Driver Version: 190.53 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

Marcus, WORKSFORME. Using the 190.53 installer from NVIDIA released on 16 December. Boots without any problems, xorg falls back to the nv driver until the proprietary driver gets rebuilt. Any other info you need? -- But the fact that some geniuses were laughed at does not imply that all who are laughed at are geniuses. They laughed at Columbus, they laughed at Fulton, they laughed at the Wright Brothers. But they also laughed at Bozo the Clown. Carl Sagan -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

On 02/04/2010 07:24 PM, Marcus Meissner wrote:

Hi folks,

We are currently having difficulties with the 11.2 kernel update, to version 2.6.31.12-0.1.1.

The kernel update is currently in the 11.2-test repo, http://download.opensuse.org/update/11.2-test/ This repo is used for testing our updates before they are pushed to the official 11.2 repo.

A cursory test here showed that the NVIDIA drivers from the NVIDIA YMPs that were there before Christmas did not work with the new kernel. The ones published by NVIDIA after Christmas work with the test kernel.

We would like to have some testcoverage with NVIDIA drivers and this kernel update.

So if you have a NVIDIA card and use the drivers from either NVIDIA single click install (or even self installed ones), feedback would be appreciated.

As this is the test repo, we recommend testers be able to recover from potential wrong updates, like a non booting kernel. If you do not know how to recover from such things, please just disregard this email.

Ciao, Marcus (for the openSUSE Maintenance and Security team ;)

I'm still using "NVIDIA-Linux-x86_64-190.42-pkg2.run" dated 2009-11-06 would testing the kernel with that driver help to shed any light? Regards Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

No problem here with the test kernel and the Nvidia driver that's currently available from the repo. boot.msg, xorg.conf and xorg.0.log follow the hardware description. -- hwinfo --gfx 24: PCI 300.0: 0300 VGA compatible controller (VGA) [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_10de_193 Unique ID: svHJ.KwCCy+MiIoF Parent ID: vSkL.aEVL1N5Zl53 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:03:00.0 SysFS BusID: 0000:03:00.0 Hardware Class: graphics card Model: "nVidia GeForce 8800 GTS" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0193 "GeForce 8800 GTS" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x823c Revision: 0xa2 Driver: "nvidia" Driver Modules: "nvidia" Memory Range: 0xf7000000-0xf7ffffff (rw,non-prefetchable) Memory Range: 0xd0000000-0xdfffffff (rw,prefetchable) Memory Range: 0xf4000000-0xf5ffffff (rw,non-prefetchable) I/O Ports: 0xdc00-0xdc7f (rw) Memory Range: 0xf6fe0000-0xf6ffffff (ro,prefetchable,disabled) IRQ: 16 (54107 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v000010DEd00000193sv00001043sd0000823Cbc03sc00i00" Driver Info #0: XFree86 v4 Server Module: nv Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #10 (PCI bridge) Primary display adapter: #24 -- xorf.0.log X.Org X Server 1.6.5 Release Date: 2009-10-11 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux excession 2.6.31.12-0.1-desktop #1 SMP PREEMPT 2010-01-27 08:20:11 +0100 x86_64 Build Date: 02 November 2009 12:04:43PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 5 23:58:44 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Device0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) Option "Xinerama" "0" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/truetype/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules" (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Keyboard0 (WW) Disabling Mouse0 (II) Loader magic: 0xcc0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0:3:0:0) 10de:0193:1043:823c rev 162, Mem @ 0xf7000000/16777216, 0xd0000000/268435456, 0xf4000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072 (--) PCI: (0:4:2:0) 14f1:8800:17de:08a6 rev 5, Mem @ 0xfc000000/16777216 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules//extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules//extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/updates//extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 190.53 Wed Dec 9 16:27:33 PST 2009 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules//extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules//extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib64/xorg/modules//extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "nvidia" (II) Loading /usr/lib64/xorg/modules/updates//drivers/nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) NVIDIA dlloader X Driver 190.53 Wed Dec 9 15:39:50 PST 2009 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 03@00:00:0 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib64/xorg/modules//libwfb.so (II) Module wfb: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "TwinView" "1" (**) NVIDIA(0): Option "MetaModes" "DFP-0: nvidia-auto-select +0+0, DFP-1: nvidia-auto-select +1680+0" (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-1" (**) NVIDIA(0): Option "DPI" "100 x 100" (**) NVIDIA(0): Option "DamageEvents" "True" (**) NVIDIA(0): Option "AllowIndirectPixmaps" "True" (**) Feb 05 23:58:45 NVIDIA(0): Enabling RENDER acceleration (II) Feb 05 23:58:45 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) Feb 05 23:58:45 NVIDIA(0): enabled. (II) Feb 05 23:58:46 NVIDIA(0): NVIDIA GPU GeForce 8800 GTS (G80) at PCI:3:0:0 (GPU-0) (--) Feb 05 23:58:46 NVIDIA(0): Memory: 327680 kBytes (--) Feb 05 23:58:46 NVIDIA(0): VideoBIOS: 60.80.18.00.01 (II) Feb 05 23:58:46 NVIDIA(0): Detected PCI Express Link width: 16X (--) Feb 05 23:58:46 NVIDIA(0): Interlaced video modes are supported on this GPU (--) Feb 05 23:58:46 NVIDIA(0): Connected display device(s) on GeForce 8800 GTS at PCI:3:0:0: (--) Feb 05 23:58:46 NVIDIA(0): Samsung SyncMaster (DFP-0) (--) Feb 05 23:58:46 NVIDIA(0): Samsung SyncMaster (DFP-1) (--) Feb 05 23:58:46 NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock (--) Feb 05 23:58:46 NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS (--) Feb 05 23:58:46 NVIDIA(0): Samsung SyncMaster (DFP-1): 330.0 MHz maximum pixel clock (--) Feb 05 23:58:46 NVIDIA(0): Samsung SyncMaster (DFP-1): Internal Dual Link TMDS (**) Feb 05 23:58:46 NVIDIA(0): TwinView enabled (II) Feb 05 23:58:46 NVIDIA(0): Display Devices found referenced in MetaMode: DFP-0, DFP-1 (II) Feb 05 23:58:46 NVIDIA(0): Assigned Display Devices: DFP-0, DFP-1 (II) Feb 05 23:58:46 NVIDIA(0): Validated modes: (II) Feb 05 23:58:46 NVIDIA(0): (II) Feb 05 23:58:46 NVIDIA(0): "DFP-0:nvidia-auto- select+0+0,DFP-1:nvidia-auto-select+1680+0" (II) Feb 05 23:58:46 NVIDIA(0): Virtual screen size determined to be 3360 x 1050 (**) Feb 05 23:58:46 NVIDIA(0): DPI set to (100, 100); computed from "DPI" X config option (==) Feb 05 23:58:46 NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) Feb 05 23:58:46 NVIDIA(0): Initialized GPU GART. (II) Feb 05 23:58:46 NVIDIA(0): Setting mode (II) Feb 05 23:58:46 NVIDIA(0): "DFP-0:nvidia-auto- select+0+0,DFP-1:nvidia-auto-select+1680+0" (II) Loading extension NV-GLX (II) Feb 05 23:58:46 NVIDIA(0): Initialized OpenGL Acceleration (==) NVIDIA(0): Disabling shared memory pixmaps (II) Feb 05 23:58:46 NVIDIA(0): Initialized X Rendering Acceleration (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (II) Loading extension XINERAMA (==) RandR enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing extension GLX (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server- B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/hal: Adding input device cx88 IR (KWorld/VStream XPert D (II) LoadModule: "evdev" (II) Loading /usr/lib64/xorg/modules//input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.5, module version = 2.2.5 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) cx88 IR (KWorld/VStream XPert D: always reports core events (**) cx88 IR (KWorld/VStream XPert D: Device: "/dev/input/event7" (II) cx88 IR (KWorld/VStream XPert D: Found keys (II) cx88 IR (KWorld/VStream XPert D: Configuring as keyboard (II) XINPUT: Adding extended input device "cx88 IR (KWorld/VStream XPert D" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server- D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device CHICONY Compaq USB Keyboard (**) CHICONY Compaq USB Keyboard: always reports core events (**) CHICONY Compaq USB Keyboard: Device: "/dev/input/event2" (II) CHICONY Compaq USB Keyboard: Found keys (II) CHICONY Compaq USB Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "CHICONY Compaq USB Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server- D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Tempest Habu Mouse (**) Tempest Habu Mouse: always reports core events (**) Tempest Habu Mouse: Device: "/dev/input/event1" (II) Tempest Habu Mouse: Found keys (II) Tempest Habu Mouse: Configuring as keyboard (II) XINPUT: Adding extended input device "Tempest Habu Mouse" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server- D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Tempest Habu Mouse (**) Tempest Habu Mouse: always reports core events (**) Tempest Habu Mouse: Device: "/dev/input/event0" (II) Tempest Habu Mouse: Found 12 mouse buttons (II) Tempest Habu Mouse: Found x and y relative axes (II) Tempest Habu Mouse: Found scroll wheel(s) (II) Tempest Habu Mouse: Configuring as mouse (**) Tempest Habu Mouse: YAxisMapping: buttons 4 and 5 (**) Tempest Habu Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Tempest Habu Mouse" (type: MOUSE) (**) Tempest Habu Mouse: (accel) keeping acceleration scheme 1 (**) Tempest Habu Mouse: (accel) filter chain progression: 2.00 (**) Tempest Habu Mouse: (accel) filter stage 0: 20.00 ms (**) Tempest Habu Mouse: (accel) set acceleration profile 0 (II) Tempest Habu Mouse: initialized for relative axes. (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event4" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server- D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event3" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server- D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server- F5FE1571F0F7DF15C1C863F0B3BC963D52348161.xkm (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server- F5FE1571F0F7DF15C1C863F0B3BC963D52348161.xkm (II) Feb 05 23:58:47 NVIDIA(0): Setting mode (II) Feb 05 23:58:47 NVIDIA(0): "DFP-0:nvidia-auto- select+0+0,DFP-1:nvidia-auto-select+1680+0" (II) Feb 05 23:58:47 NVIDIA(0): Setting mode (II) Feb 05 23:58:47 NVIDIA(0): "DFP-0:nvidia-auto- select+0+0,DFP-1:nvidia-auto-select+1680+0" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server- ED6EC9BFA960BB43B5693D5733AB7E56A9FB1591.xkm -- xorg.conf Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "ServerFlags" Option "Xinerama" "0" EndSection Section "InputDevice" # generated from data in "/etc/sysconfig/mouse" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "yes" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 DisplaySize 474 296 Option "DPI" "100 x 100" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 DisplaySize 474 296 Option "DPI" "100 x 100" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8800 GTS" Option "DamageEvents" "True" Option "AllowIndirectPixmaps" "True" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 # DisplaySize 948 296 Option "DPI" "100 x 100" Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: nvidia- auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection -- boot.msg klogd 1.4.1, log source = ksyslog started. <5>[ 0.000000] Linux version 2.6.31.12-0.1-desktop (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT 2010-01-27 08:20:11 +0100 <6>[ 0.000000] Command line: root=/dev/disk/by-id/ata- WDC_WD2000JD-00HBB0_WD-WMAL81141515-part5 splash=silent quiet vga=0x31a <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <6>[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) <6>[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7fb0000 (usable) <6>[ 0.000000] BIOS-e820: 00000000c7fb0000 - 00000000c7fc0000 (ACPI data) <6>[ 0.000000] BIOS-e820: 00000000c7fc0000 - 00000000c7ff0000 (ACPI NVS) <6>[ 0.000000] BIOS-e820: 00000000c7ff0000 - 00000000c8000000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) <6>[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) <6>[ 0.000000] DMI present. <5>[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. <7>[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) <6>[ 0.000000] last_pfn = 0xc7fb0 max_arch_pfn = 0x400000000 <7>[ 0.000000] MTRR default type: uncachable <7>[ 0.000000] MTRR fixed ranges enabled: <7>[ 0.000000] 00000-9FFFF write-back <7>[ 0.000000] A0000-DFFFF uncachable <7>[ 0.000000] E0000-EFFFF write-through <7>[ 0.000000] F0000-FFFFF write-protect <7>[ 0.000000] MTRR variable ranges enabled: <7>[ 0.000000] 0 base 000000000 mask F80000000 write-back <7>[ 0.000000] 1 base 080000000 mask FC0000000 write-back <7>[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back <7>[ 0.000000] 3 disabled <7>[ 0.000000] 4 disabled <7>[ 0.000000] 5 disabled <7>[ 0.000000] 6 disabled <7>[ 0.000000] 7 disabled <6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 <6>[ 0.000000] Scanning 0 areas for low memory corruption <6>[ 0.000000] modified physical RAM map: <6>[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) <6>[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) <6>[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) <6>[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) <6>[ 0.000000] modified: 0000000000100000 - 00000000c7fb0000 (usable) <6>[ 0.000000] modified: 00000000c7fb0000 - 00000000c7fc0000 (ACPI data) <6>[ 0.000000] modified: 00000000c7fc0000 - 00000000c7ff0000 (ACPI NVS) <6>[ 0.000000] modified: 00000000c7ff0000 - 00000000c8000000 (reserved) <6>[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) <6>[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) <6>[ 0.000000] modified: 00000000ff380000 - 0000000100000000 (reserved) <7>[ 0.000000] initial memory mapped : 0 - 20000000 <6>[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7fb0000 <7>[ 0.000000] 0000000000 - 00c7e00000 page 2M <7>[ 0.000000] 00c7e00000 - 00c7fb0000 page 4k <7>[ 0.000000] kernel direct mapping tables up to c7fb0000 @ 10000-16000 <6>[ 0.000000] RAMDISK: 37887000 - 37fefa4f <4>[ 0.000000] ACPI: RSDP 00000000000f9b10 00014 (v00 ACPIAM) <4>[ 0.000000] ACPI: RSDT 00000000c7fb0000 00034 (v01 A_M_I OEMRSDT 12000710 MSFT 00000097) <4>[ 0.000000] ACPI: FACP 00000000c7fb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097) <4>[ 0.000000] ACPI: DSDT 00000000c7fb0440 04756 (v01 ASR18 ASR18171 00000171 INTL 02002026) <4>[ 0.000000] ACPI: FACS 00000000c7fc0000 00040 <4>[ 0.000000] ACPI: APIC 00000000c7fb0390 0006C (v01 A_M_I OEMAPIC 12000710 MSFT 00000097) <4>[ 0.000000] ACPI: MCFG 00000000c7fb0400 0003C (v01 A_M_I OEMMCFG 12000710 MSFT 00000097) <4>[ 0.000000] ACPI: OEMB 00000000c7fc0040 00046 (v01 A_M_I AMI_OEM 12000710 MSFT 00000097) <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 <6>[ 0.000000] No NUMA configuration found <6>[ 0.000000] Faking a node at 0000000000000000-00000000c7fb0000 <6>[ 0.000000] Bootmem setup node 0 0000000000000000-00000000c7fb0000 <6>[ 0.000000] NODE_DATA [0000000000014000 - 000000000002bfff] <6>[ 0.000000] bootmap [000000000002c000 - 0000000000044ff7] pages 19 <6>[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00c7fb0000] <6>[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] <6>[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] <6>[ 0.000000] #2 [0001000000 - 0001c4bf70] TEXT DATA BSS ==> [0001000000 - 0001c4bf70] <6>[ 0.000000] #3 [0037887000 - 0037fefa4f] RAMDISK ==> [0037887000 - 0037fefa4f] <6>[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] <6>[ 0.000000] #5 [0001c4c000 - 0001c4c12f] BRK ==> [0001c4c000 - 0001c4c12f] <6>[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] <6>[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 <7>[ 0.000000] [ffffea0000000000-ffffea0002bfffff] PMD -> [ffff880002200000-ffff880004dfffff] on node 0 <4>[ 0.000000] Zone PFN ranges: <4>[ 0.000000] DMA 0x00000010 -> 0x00001000 <4>[ 0.000000] DMA32 0x00001000 -> 0x00100000 <4>[ 0.000000] Normal 0x00100000 -> 0x00100000 <4>[ 0.000000] Movable zone start PFN for each node <4>[ 0.000000] early_node_map[2] active PFN ranges <4>[ 0.000000] 0: 0x00000010 -> 0x0000009f <4>[ 0.000000] 0: 0x00000100 -> 0x000c7fb0 <7>[ 0.000000] On node 0 totalpages: 819007 <7>[ 0.000000] DMA zone: 56 pages used for memmap <7>[ 0.000000] DMA zone: 103 pages reserved <7>[ 0.000000] DMA zone: 3824 pages, LIFO batch:0 <7>[ 0.000000] DMA32 zone: 11143 pages used for memmap <7>[ 0.000000] DMA32 zone: 803881 pages, LIFO batch:31 <6>[ 0.000000] ACPI: PM-Timer IO Port: 0x808 <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) <6>[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <6>[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>[ 0.000000] ACPI: IRQ0 used by override. <7>[ 0.000000] ACPI: IRQ2 used by override. <7>[ 0.000000] ACPI: IRQ9 used by override. <6>[ 0.000000] Using ACPI (MADT) for SMP configuration information <6>[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs <7>[ 0.000000] nr_irqs_gsi: 24 <6>[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 <6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 <6>[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 <6>[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:36d00000) <6>[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 <6>[ 0.000000] PERCPU: Embedded 28 pages at ffff880001c80000, static data 82784 bytes <4>[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 807705 <4>[ 0.000000] Policy zone: DMA32 <5>[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata- WDC_WD2000JD-00HBB0_WD-WMAL81141515-part5 splash=silent quiet vga=0x31a <6>[ 0.000000] bootsplash: silent mode. <4>[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) <6>[ 0.000000] Initializing CPU#0 <6>[ 0.000000] Checking aperture... <6>[ 0.000000] No AGP bridge found <7>[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area <7>[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! <6>[ 0.000000] Memory: 3209960k/3276480k available (5501k kernel code, 452k absent, 66068k reserved, 4470k data, 980k init) <6>[ 0.000000] Hierarchical RCU implementation. <6>[ 0.000000] NR_IRQS:4352 nr_irqs:440 <4>[ 0.000000] Fast TSC calibration using PIT <4>[ 0.000000] Detected 2391.193 MHz processor. <4>[ 0.000099] Console: colour dummy device 80x25 <6>[ 0.000102] console [tty0] enabled <6>[ 0.001012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4782.38 BogoMIPS (lpj=2391193) <4>[ 0.022242] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved <6>[ 0.022359] Security Framework initialized <6>[ 0.022381] AppArmor: AppArmor initialized <6>[ 0.022752] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) <6>[ 0.025099] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) <4>[ 0.026273] Mount-cache hash table entries: 256 <6>[ 0.026478] CPU: L1 I cache: 32K, L1 D cache: 32K <6>[ 0.026481] CPU: L2 cache: 4096K <6>[ 0.026484] CPU 0/0x0 -> Node 0 <6>[ 0.026487] CPU: Physical Processor ID: 0 <6>[ 0.026488] CPU: Processor Core ID: 0 <6>[ 0.026492] mce: CPU supports 6 MCE banks <6>[ 0.026500] CPU0: Thermal monitoring enabled (TM2) <6>[ 0.026504] using mwait in idle threads. <6>[ 0.026506] Performance Counters: Core2 events, Intel PMU driver. <6>[ 0.026513] ... version: 2 <6>[ 0.026514] ... bit width: 40 <6>[ 0.026516] ... generic counters: 2 <6>[ 0.026517] ... value mask: 000000ffffffffff <6>[ 0.026519] ... max period: 000000007fffffff <6>[ 0.026520] ... fixed-purpose counters: 3 <6>[ 0.026522] ... counter mask: 0000000700000003 <6>[ 0.027441] ACPI: Core revision 20090521 <6>[ 0.034066] Setting APIC routing to flat <6>[ 0.034378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 0.044407] CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06 <6>[ 0.044993] Booting processor 1 APIC 0x1 ip 0x6000 <6>[ 0.000999] Initializing CPU#1 <6>[ 0.000999] Calibrating delay using timer specific routine.. 4781.36 BogoMIPS (lpj=2390683) <6>[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K <6>[ 0.000999] CPU: L2 cache: 4096K <6>[ 0.000999] CPU 1/0x1 -> Node 0 <6>[ 0.000999] CPU: Physical Processor ID: 0 <6>[ 0.000999] CPU: Processor Core ID: 1 <6>[ 0.000999] mce: CPU supports 6 MCE banks <6>[ 0.000999] CPU1: Thermal monitoring enabled (TM2) <6>[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 <6>[ 0.116494] CPU1: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06 <6>[ 0.116503] checking TSC synchronization [CPU#0 -> CPU#1]: passed. <6>[ 0.117009] Brought up 2 CPUs <6>[ 0.117009] Total of 2 processors activated (9563.75 BogoMIPS). <7>[ 0.117069] CPU0 attaching sched-domain: <7>[ 0.117072] domain 0: span 0-1 level MC <7>[ 0.117075] groups: 0 1 <7>[ 0.117080] CPU1 attaching sched-domain: <7>[ 0.117082] domain 0: span 0-1 level MC <7>[ 0.117084] groups: 1 0 <3>[ 0.119035] tmpfs: No value for mount option 'mode' <6>[ 0.119042] devtmpfs: initialized <6>[ 0.122377] Booting paravirtualized kernel on bare hardware <6>[ 0.123006] regulator: core version 0.5 <4>[ 0.123029] Time: 23:51:09 Date: 02/05/10 <6>[ 0.123089] NET: Registered protocol family 16 <6>[ 0.123224] ACPI: bus type pci registered <6>[ 0.123272] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support. <5>[ 0.123277] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 <6>[ 0.123280] PCI: Not using MMCONFIG. <6>[ 0.123282] PCI: Using configuration type 1 for base access <4>[ 0.124068] bio: create slab <bio-0> at 0 <7>[ 0.124642] ACPI: EC: Look up EC in DSDT <6>[ 0.132946] ACPI: Interpreter enabled <6>[ 0.132950] ACPI: (supports S0 S1 S3 S4 S5) <6>[ 0.132977] ACPI: Using IOAPIC for interrupt routing <4>[ 0.140914] ACPI Warning: Incorrect checksum in table [OEMB] - D6, should be D1 20090521 tbutils-246 <6>[ 0.141048] ACPI: No dock devices found. <6>[ 0.141378] ACPI: PCI Root Bridge [PCI0] (0000:00) <6>[ 0.141478] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold <6>[ 0.141482] pci 0000:00:01.0: PME# disabled <7>[ 0.141540] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf3efc000-0xf3efffff] <6>[ 0.141579] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold <6>[ 0.141583] pci 0000:00:1b.0: PME# disabled <6>[ 0.141634] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 0.141638] pci 0000:00:1c.0: PME# disabled <6>[ 0.141691] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold <6>[ 0.141695] pci 0000:00:1c.1: PME# disabled <7>[ 0.141740] pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f] <7>[ 0.141785] pci 0000:00:1d.1: reg 20 io port: [0xb800-0xb81f] <7>[ 0.141829] pci 0000:00:1d.2: reg 20 io port: [0xb880-0xb89f] <7>[ 0.141874] pci 0000:00:1d.3: reg 20 io port: [0xbc00-0xbc1f] <7>[ 0.141923] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf3efbc00-0xf3efbfff] <6>[ 0.141970] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold <6>[ 0.141974] pci 0000:00:1d.7: PME# disabled <7>[ 0.142091] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 <6>[ 0.142096] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO <6>[ 0.142100] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO <6>[ 0.142103] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff) <7>[ 0.142144] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] <7>[ 0.142150] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] <7>[ 0.142156] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] <7>[ 0.142162] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] <7>[ 0.142168] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] <7>[ 0.142205] pci 0000:00:1f.2: reg 10 io port: [0xb400-0xb407] <7>[ 0.142211] pci 0000:00:1f.2: reg 14 io port: [0xb080-0xb083] <7>[ 0.142216] pci 0000:00:1f.2: reg 18 io port: [0xb000-0xb007] <7>[ 0.142221] pci 0000:00:1f.2: reg 1c io port: [0xac00-0xac03] <7>[ 0.142227] pci 0000:00:1f.2: reg 20 io port: [0xa880-0xa88f] <6>[ 0.142248] pci 0000:00:1f.2: PME# supported from D3hot <6>[ 0.142252] pci 0000:00:1f.2: PME# disabled <7>[ 0.142294] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] <7>[ 0.142342] pci 0000:03:00.0: reg 10 32bit mmio: [0xf7000000-0xf7ffffff] <7>[ 0.142350] pci 0000:03:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] <7>[ 0.142358] pci 0000:03:00.0: reg 1c 64bit mmio: [0xf4000000-0xf5ffffff] <7>[ 0.142363] pci 0000:03:00.0: reg 24 io port: [0xdc00-0xdc7f] <7>[ 0.142368] pci 0000:03:00.0: reg 30 32bit mmio: [0xf6fe0000-0xf6ffffff] <6>[ 0.142398] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' <7>[ 0.142451] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] <7>[ 0.142454] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf7ffffff] <7>[ 0.142458] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] <7>[ 0.142503] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff] <7>[ 0.142557] pci 0000:01:00.0: reg 10 io port: [0xc800-0xc8ff] <7>[ 0.142578] pci 0000:01:00.0: reg 18 64bit mmio: [0xf3fff000-0xf3ffffff] <7>[ 0.142600] pci 0000:01:00.0: reg 30 32bit mmio: [0xf3fc0000-0xf3fdffff] <7>[ 0.142645] pci 0000:01:00.0: supports D1 D2 <6>[ 0.142647] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold <6>[ 0.142652] pci 0000:01:00.0: PME# disabled <6>[ 0.142679] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' <7>[ 0.142751] pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff] <7>[ 0.142755] pci 0000:00:1c.1: bridge 32bit mmio: [0xf3f00000-0xf3ffffff] <7>[ 0.142798] pci 0000:04:01.0: reg 10 io port: [0xec00-0xec1f] <7>[ 0.142809] pci 0000:04:01.0: reg 14 64bit mmio: [0xfea00000-0xfebfffff] <7>[ 0.142820] pci 0000:04:01.0: reg 1c 64bit mmio: [0xf8000000-0xfbffffff] <7>[ 0.142850] pci 0000:04:01.0: supports D1 D2 <7>[ 0.142892] pci 0000:04:02.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] <7>[ 0.142970] pci 0000:04:02.2: reg 10 32bit mmio: [0xfd000000-0xfdffffff] <6>[ 0.143064] pci 0000:00:1e.0: transparent bridge <7>[ 0.143067] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] <7>[ 0.143071] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8000000-0xfebfffff] <7>[ 0.143093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>[ 0.143213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] <7>[ 0.143273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] <7>[ 0.143376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] <7>[ 0.143434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] <6>[ 0.152935] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) <6>[ 0.153059] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) <6>[ 0.153176] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) <6>[ 0.153293] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) <6>[ 0.153409] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <6>[ 0.153527] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <6>[ 0.153646] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 10 11 12 14 15) <6>[ 0.153762] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15) <5>[ 0.153955] SCSI subsystem initialized <7>[ 0.154984] libata version 3.00 loaded. <6>[ 0.155023] usbcore: registered new interface driver usbfs <6>[ 0.155023] usbcore: registered new interface driver hub <6>[ 0.155024] usbcore: registered new device driver usb <6>[ 0.155024] PCI: Using ACPI for IRQ routing <7>[ 0.157097] hpet clockevent registered <6>[ 0.157100] HPET: 3 timers in total, 0 timers will be used for per-cpu timer <6>[ 0.157106] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 <6>[ 0.157111] hpet0: 3 comparators, 64-bit 14.318180 MHz counter <6>[ 0.161677] AppArmor: AppArmor Filesystem Enabled <6>[ 0.163530] pnp: PnP ACPI init <6>[ 0.163541] ACPI: bus type pnp registered <6>[ 0.167973] pnp: PnP ACPI: found 15 devices <6>[ 0.167975] ACPI: ACPI bus type pnp unregistered <6>[ 0.167986] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved <6>[ 0.167993] system 00:07: ioport range 0x4d0-0x4d1 has been reserved <6>[ 0.167996] system 00:07: ioport range 0x800-0x87f has been reserved <6>[ 0.167999] system 00:07: ioport range 0x480-0x4bf has been reserved <6>[ 0.168001] system 00:07: ioport range 0x900-0x90f has been reserved <6>[ 0.168004] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved <6>[ 0.168007] system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved <6>[ 0.168013] system 00:09: iomem range 0xffc00000-0xfff7ffff has been reserved <6>[ 0.168018] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved <6>[ 0.168021] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved <6>[ 0.168027] system 00:0c: ioport range 0x290-0x29f has been reserved <6>[ 0.168032] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved <6>[ 0.168039] system 00:0e: iomem range 0x0-0x9ffff could not be reserved <6>[ 0.168042] system 00:0e: iomem range 0xc0000-0xcffff has been reserved <6>[ 0.168045] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved <6>[ 0.168048] system 00:0e: iomem range 0x100000-0xc7ffffff could not be reserved <6>[ 0.172840] pci 0000:00:01.0: PCI bridge, secondary bus 0000:03 <6>[ 0.172843] pci 0000:00:01.0: IO window: 0xd000-0xdfff <6>[ 0.172847] pci 0000:00:01.0: MEM window: 0xf4000000-0xf7ffffff <6>[ 0.172850] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff <6>[ 0.172855] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 <6>[ 0.172856] pci 0000:00:1c.0: IO window: disabled <6>[ 0.172861] pci 0000:00:1c.0: MEM window: disabled <6>[ 0.172864] pci 0000:00:1c.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff <6>[ 0.172870] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:01 <6>[ 0.172873] pci 0000:00:1c.1: IO window: 0xc000-0xcfff <6>[ 0.172877] pci 0000:00:1c.1: MEM window: 0xf3f00000-0xf3ffffff <6>[ 0.172881] pci 0000:00:1c.1: PREFETCH window: disabled <6>[ 0.172885] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 <6>[ 0.172888] pci 0000:00:1e.0: IO window: 0xe000-0xefff <6>[ 0.172892] pci 0000:00:1e.0: MEM window: 0xf8000000-0xfebfffff <6>[ 0.172896] pci 0000:00:1e.0: PREFETCH window: disabled <7>[ 0.172905] alloc irq_desc for 16 on node 0 <7>[ 0.172907] alloc kstat_irqs on node 0 <6>[ 0.172912] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>[ 0.172915] pci 0000:00:01.0: setting latency timer to 64 <6>[ 0.172922] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>[ 0.172926] pci 0000:00:1c.0: setting latency timer to 64 <7>[ 0.172932] alloc irq_desc for 17 on node 0 <7>[ 0.172934] alloc kstat_irqs on node 0 <6>[ 0.172937] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 <7>[ 0.172940] pci 0000:00:1c.1: setting latency timer to 64 <7>[ 0.172946] pci 0000:00:1e.0: setting latency timer to 64 <7>[ 0.172950] pci_bus 0000:00: resource 0 io: [0x00-0xffff] <7>[ 0.172952] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] <7>[ 0.172955] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] <7>[ 0.172957] pci_bus 0000:03: resource 1 mem: [0xf4000000-0xf7ffffff] <7>[ 0.172959] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff] <7>[ 0.172962] pci_bus 0000:02: resource 2 pref mem [0xcff00000-0xcfffffff] <7>[ 0.172964] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] <7>[ 0.172966] pci_bus 0000:01: resource 1 mem: [0xf3f00000-0xf3ffffff] <7>[ 0.172968] pci_bus 0000:04: resource 0 io: [0xe000-0xefff] <7>[ 0.172970] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xfebfffff] <7>[ 0.172972] pci_bus 0000:04: resource 3 io: [0x00-0xffff] <7>[ 0.172975] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] <6>[ 0.173034] NET: Registered protocol family 2 <6>[ 0.173217] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 0.174385] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) <6>[ 0.178538] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) <6>[ 0.179132] TCP: Hash tables configured (established 524288 bind 65536) <6>[ 0.179135] TCP reno registered <6>[ 0.179314] NET: Registered protocol family 1 <6>[ 0.179390] Unpacking initramfs... <6>[ 0.300585] Freeing initrd memory: 7586k freed <6>[ 0.303587] Scanning for low memory corruption every 60 seconds <6>[ 0.303800] audit: initializing netlink socket (disabled) <5>[ 0.303818] type=2000 audit(1265413869.302:1): initialized <6>[ 0.307092] HugeTLB registered 2 MB page size, pre-allocated 0 pages <5>[ 0.307234] VFS: Disk quotas dquot_6.5.2 <4>[ 0.307275] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 0.307427] msgmni has been set to 1571 <6>[ 0.307536] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) <6>[ 0.307539] io scheduler noop registered <6>[ 0.307541] io scheduler anticipatory registered <6>[ 0.307543] io scheduler deadline registered <6>[ 0.307562] io scheduler cfq registered (default) <7>[ 0.307723] pci 0000:03:00.0: Boot video device <7>[ 0.307856] alloc irq_desc for 24 on node 0 <7>[ 0.307858] alloc kstat_irqs on node 0 <7>[ 0.307869] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X <7>[ 0.307875] pcieport-driver 0000:00:01.0: setting latency timer to 64 <7>[ 0.307993] alloc irq_desc for 25 on node 0 <7>[ 0.307995] alloc kstat_irqs on node 0 <7>[ 0.308002] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X <7>[ 0.308009] pcieport-driver 0000:00:1c.0: setting latency timer to 64 <7>[ 0.308129] alloc irq_desc for 26 on node 0 <7>[ 0.308131] alloc kstat_irqs on node 0 <7>[ 0.308138] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X <7>[ 0.308145] pcieport-driver 0000:00:1c.1: setting latency timer to 64 <4>[ 0.308237] pci-stub: invalid id string "" <6>[ 0.308344] vesafb: framebuffer at 0xf5000000, mapped to 0xffffc90001080000, using 5120k, total 14336k <6>[ 0.308346] vesafb: mode is 1280x1024x16, linelength=2560, pages=1 <6>[ 0.308348] vesafb: scrolling: redraw <6>[ 0.308351] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>[ 0.308639] bootsplash 3.1.6-2004/03/31: looking for picture... <6>[ 0.321748] bootsplash: silentjpeg size 130564 bytes <6>[ 0.339582] bootsplash: ...found (1280x1024, 29083 bytes, v3). <4>[ 0.392268] Console: switching to colour frame buffer device 156x60 <6>[ 0.444520] fb0: VESA VGA frame buffer device <6>[ 0.445936] Non-volatile memory driver v1.3 <6>[ 0.445939] Linux agpgart interface v0.103 <6>[ 0.445944] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled <6>[ 0.446039] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>[ 0.446482] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <7>[ 0.446705] ata_piix 0000:00:1f.1: version 2.13 <7>[ 0.446723] alloc irq_desc for 18 on node 0 <7>[ 0.446725] alloc kstat_irqs on node 0 <6>[ 0.446736] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 <7>[ 0.446776] ata_piix 0000:00:1f.1: setting latency timer to 64 <6>[ 0.446843] scsi0 : ata_piix <6>[ 0.446959] scsi1 : ata_piix <6>[ 0.448560] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 <6>[ 0.448563] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 <6>[ 0.448730] ata1: clearing spurious IRQ <7>[ 0.448774] ata2: port disabled. ignoring. <7>[ 0.449474] alloc irq_desc for 19 on node 0 <7>[ 0.449476] alloc kstat_irqs on node 0 <6>[ 0.449481] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 <6>[ 0.449485] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] <7>[ 0.449515] ata_piix 0000:00:1f.2: setting latency timer to 64 <6>[ 0.449563] scsi2 : ata_piix <6>[ 0.449616] scsi3 : ata_piix <6>[ 0.449650] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 19 <6>[ 0.449652] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 19 <6>[ 0.449711] Fixed MDIO Bus: probed <6>[ 0.449717] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <7>[ 0.449759] alloc irq_desc for 23 on node 0 <7>[ 0.449761] alloc kstat_irqs on node 0 <6>[ 0.449765] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 <7>[ 0.449782] ehci_hcd 0000:00:1d.7: setting latency timer to 64 <6>[ 0.449785] ehci_hcd 0000:00:1d.7: EHCI Host Controller <6>[ 0.449816] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 <6>[ 0.449821] ehci_hcd 0000:00:1d.7: using broken periodic workaround <6>[ 0.453726] ehci_hcd 0000:00:1d.7: debug port 1 <7>[ 0.453732] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported <6>[ 0.453743] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3efbc00 <6>[ 0.462913] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 <6>[ 0.462947] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 0.462950] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 0.462952] usb usb1: Product: EHCI Host Controller <6>[ 0.462954] usb usb1: Manufacturer: Linux 2.6.31.12-0.1-desktop ehci_hcd <6>[ 0.462956] usb usb1: SerialNumber: 0000:00:1d.7 <6>[ 0.463021] usb usb1: configuration #1 chosen from 1 choice <6>[ 0.463049] hub 1-0:1.0: USB hub found <6>[ 0.463056] hub 1-0:1.0: 8 ports detected <6>[ 0.463125] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 0.463138] uhci_hcd: USB Universal Host Controller Interface driver <6>[ 0.464465] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 <7>[ 0.464471] uhci_hcd 0000:00:1d.0: setting latency timer to 64 <6>[ 0.464474] uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>[ 0.464482] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 <6>[ 0.464505] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480 <6>[ 0.464536] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 0.464538] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 0.464541] usb usb2: Product: UHCI Host Controller <6>[ 0.464542] usb usb2: Manufacturer: Linux 2.6.31.12-0.1-desktop uhci_hcd <6>[ 0.464544] usb usb2: SerialNumber: 0000:00:1d.0 <6>[ 0.464600] usb usb2: configuration #1 chosen from 1 choice <6>[ 0.464624] hub 2-0:1.0: USB hub found <6>[ 0.464631] hub 2-0:1.0: 2 ports detected <6>[ 0.465466] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 <7>[ 0.465471] uhci_hcd 0000:00:1d.1: setting latency timer to 64 <6>[ 0.465474] uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>[ 0.465482] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 <6>[ 0.465503] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800 <6>[ 0.465534] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 0.465537] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 0.465539] usb usb3: Product: UHCI Host Controller <6>[ 0.465541] usb usb3: Manufacturer: Linux 2.6.31.12-0.1-desktop uhci_hcd <6>[ 0.465543] usb usb3: SerialNumber: 0000:00:1d.1 <6>[ 0.465594] usb usb3: configuration #1 chosen from 1 choice <6>[ 0.465620] hub 3-0:1.0: USB hub found <6>[ 0.465625] hub 3-0:1.0: 2 ports detected <6>[ 0.466465] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 <7>[ 0.466470] uhci_hcd 0000:00:1d.2: setting latency timer to 64 <6>[ 0.466473] uhci_hcd 0000:00:1d.2: UHCI Host Controller <6>[ 0.466481] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 <6>[ 0.466509] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880 <6>[ 0.466540] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 0.466542] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 0.466544] usb usb4: Product: UHCI Host Controller <6>[ 0.466546] usb usb4: Manufacturer: Linux 2.6.31.12-0.1-desktop uhci_hcd <6>[ 0.466548] usb usb4: SerialNumber: 0000:00:1d.2 <6>[ 0.466601] usb usb4: configuration #1 chosen from 1 choice <6>[ 0.466626] hub 4-0:1.0: USB hub found <6>[ 0.466632] hub 4-0:1.0: 2 ports detected <6>[ 0.467464] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 <7>[ 0.467470] uhci_hcd 0000:00:1d.3: setting latency timer to 64 <6>[ 0.467473] uhci_hcd 0000:00:1d.3: UHCI Host Controller <6>[ 0.467481] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 <6>[ 0.467509] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00 <6>[ 0.467539] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 0.467541] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 0.467543] usb usb5: Product: UHCI Host Controller <6>[ 0.467545] usb usb5: Manufacturer: Linux 2.6.31.12-0.1-desktop uhci_hcd <6>[ 0.467547] usb usb5: SerialNumber: 0000:00:1d.3 <6>[ 0.467602] usb usb5: configuration #1 chosen from 1 choice <6>[ 0.467626] hub 5-0:1.0: USB hub found <6>[ 0.467631] hub 5-0:1.0: 2 ports detected <6>[ 0.467684] Initializing USB Mass Storage driver... <6>[ 0.467713] usbcore: registered new interface driver usb-storage <6>[ 0.467715] USB Mass Storage support registered. <6>[ 0.467740] usbcore: registered new interface driver libusual <6>[ 0.467751] usbcore: registered new interface driver ums-alauda <6>[ 0.467764] usbcore: registered new interface driver ums-cypress <6>[ 0.467776] usbcore: registered new interface driver ums-datafab <6>[ 0.467787] usbcore: registered new interface driver ums-freecom <6>[ 0.467797] usbcore: registered new interface driver ums-isd200 <6>[ 0.467808] usbcore: registered new interface driver ums-jumpshot <6>[ 0.467818] usbcore: registered new interface driver ums-karma <6>[ 0.467829] usbcore: registered new interface driver ums-onetouch <6>[ 0.467840] usbcore: registered new interface driver ums-sddr09 <6>[ 0.467851] usbcore: registered new interface driver ums-sddr55 <6>[ 0.467861] usbcore: registered new interface driver ums-usbat <6>[ 0.467908] PNP: No PS/2 controller found. Probing ports directly. <6>[ 0.470584] serio: i8042 KBD port at 0x60,0x64 irq 1 <6>[ 0.470589] serio: i8042 AUX port at 0x60,0x64 irq 12 <6>[ 0.470649] mice: PS/2 mouse device common for all mice <6>[ 0.470717] rtc_cmos 00:03: RTC can wake from S4 <6>[ 0.470763] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 <6>[ 0.470786] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs <6>[ 0.470798] cpuidle: using governor ladder <6>[ 0.470800] cpuidle: using governor menu <6>[ 0.471065] usbcore: registered new interface driver hiddev <6>[ 0.471078] usbcore: registered new interface driver usbhid <6>[ 0.471080] usbhid: v2.6:USB HID core driver <6>[ 0.558224] TCP cubic registered <6>[ 0.558283] NET: Registered protocol family 10 <6>[ 0.558711] lo: Disabled Privacy Extensions <6>[ 0.559021] lib80211: common routines for IEEE802.11 drivers <7>[ 0.559024] lib80211_crypt: registered algorithm 'NULL' <7>[ 0.559105] PM: Resume from disk failed. <4>[ 0.559117] registered taskstats version 1 <4>[ 0.559231] Magic number: 14:130:908 <6>[ 0.559249] mem port: hash matches <6>[ 0.559292] rtc_cmos 00:03: setting system clock to 2010-02-05 23:51:10 UTC (1265413870) <6>[ 0.599020] ata1: clearing spurious IRQ <6>[ 0.602227] ata1: clearing spurious IRQ <6>[ 0.616005] ata3.00: ATA-6: WDC WD2000JD-00HBB0, 08.02D08, max UDMA/133 <6>[ 0.616008] ata3.00: 390721968 sectors, multi 16: LBA48 <6>[ 0.616145] ata3.01: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7 <6>[ 0.616147] ata3.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) <6>[ 0.623356] ata3.00: configured for UDMA/133 <6>[ 0.630692] ata4.01: ATA-7: SAMSUNG HD252HJ, 1AC01110, max UDMA7 <6>[ 0.630695] ata4.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) <6>[ 0.650149] ata4.01: configured for UDMA/133 <6>[ 0.651322] ata1.00: ATA-7: ST3250620A, 3.AAD, max UDMA/100 <6>[ 0.651324] ata1.00: 488397168 sectors, multi 16: LBA48 <6>[ 0.651343] ata1.01: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB02, max UDMA/33 <6>[ 0.651445] ata1: clearing spurious IRQ <7>[ 0.657418] Switched to high resolution mode on CPU 1 <7>[ 0.657867] Switched to high resolution mode on CPU 0 <6>[ 0.661297] ata3.01: configured for UDMA/133 <6>[ 0.689107] ata1: clearing spurious IRQ <6>[ 0.726197] ata1.00: configured for UDMA/100 <6>[ 0.726262] ata1: clearing spurious IRQ <6>[ 0.729107] ata1: clearing spurious IRQ <6>[ 0.732180] ata1.01: configured for UDMA/33 <5>[ 0.733425] scsi 0:0:0:0: Direct-Access ATA ST3250620A 3.AA PQ: 0 ANSI: 5 <5>[ 0.733555] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) <5>[ 0.734043] sd 0:0:0:0: [sda] Write Protect is off <7>[ 0.734046] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>[ 0.734069] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>[ 0.734188] sda: sda1 <5>[ 0.774437] scsi 0:0:1:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB02 PQ: 0 ANSI: 5 <5>[ 0.774597] sd 0:0:0:0: [sda] Attached SCSI disk <5>[ 0.774652] scsi 2:0:0:0: Direct-Access ATA WDC WD2000JD-00H 08.0 PQ: 0 ANSI: 5 <5>[ 0.774736] sd 2:0:0:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB) <5>[ 0.774788] sd 2:0:0:0: [sdb] Write Protect is off <7>[ 0.774791] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 <5>[ 0.774804] scsi 2:0:1:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 <5>[ 0.774815] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>[ 0.774953] sdb: <5>[ 0.775042] scsi 3:0:1:0: Direct-Access ATA SAMSUNG HD252HJ 1AC0 PQ: 0 ANSI: 5 <5>[ 0.775153] sd 3:0:1:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB) <5>[ 0.775196] sd 3:0:1:0: [sdd] Write Protect is off <7>[ 0.775199] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00 <5>[ 0.775221] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>[ 0.775333] sdd: <5>[ 0.775404] sd 2:0:1:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) <4>[ 0.778695] sdd1 sdd2 sdd3 sdd4 < sdd5 sdb1 sdb2 sdb3 sdb4 < sdd6 > <5>[ 0.796315] sd 3:0:1:0: [sdd] Attached SCSI disk <5>[ 0.808046] sd 2:0:1:0: [sdc] Write Protect is off <7>[ 0.808049] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00 <5>[ 0.808072] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>[ 0.808183] sdc: sdb5 sdc1 sdc2 sdc3 sdc4 < sdb6 > <4>[ 0.833093] sdc5 <5>[ 0.841534] sd 2:0:0:0: [sdb] Attached SCSI disk <4>[ 0.841539] sdc6 > <5>[ 0.841830] sd 2:0:1:0: [sdc] Attached SCSI disk <6>[ 0.841887] Freeing unused kernel memory: 980k freed <6>[ 0.842143] Write protecting the kernel read-only data: 8860k <6>[ 0.869581] processor LNXCPU:00: registered as cooling_device0 <6>[ 0.869621] processor LNXCPU:01: registered as cooling_device1 <6>[ 0.878058] udev: starting version 146 <6>[ 1.160013] usb 2-1: new full speed USB device using uhci_hcd and address 2 <6>[ 1.321543] usb 2-1: New USB device found, idVendor=1532, idProduct=0009 <6>[ 1.321546] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>[ 1.321549] usb 2-1: Product: Habu Mouse <6>[ 1.321551] usb 2-1: Manufacturer: Tempest <6>[ 1.321635] usb 2-1: configuration #1 chosen from 1 choice <6>[ 1.329642] input: Tempest Habu Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input0 <6>[ 1.329721] generic-usb 0003:1532:0009.0001: input,hidraw0: USB HID v10.01 Mouse [Tempest Habu Mouse] on usb-0000:00:1d.0-1/input0 <6>[ 1.331759] input: Tempest Habu Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input1 <6>[ 1.331823] generic-usb 0003:1532:0009.0002: input,hidraw1: USB HID v10.01 Keyboard [Tempest Habu Mouse] on usb-0000:00:1d.0-1/input1 <6>[ 1.537068] usb 2-2: new low speed USB device using uhci_hcd and address 3 <6>[ 1.683824] EXT4-fs (sdb5): barriers enabled <6>[ 1.698657] kjournald2 starting: pid 250, dev sdb5:8, commit interval 5 seconds <6>[ 1.699065] EXT4-fs (sdb5): internal journal on sdb5:8 <6>[ 1.699069] EXT4-fs (sdb5): delayed allocation enabled <6>[ 1.699072] EXT4-fs: file extents enabled <6>[ 1.699361] EXT4-fs: mballoc enabled <6>[ 1.699372] EXT4-fs (sdb5): mounted filesystem with ordered data mode <6>[ 1.700547] usb 2-2: New USB device found, idVendor=03f0, idProduct=0024 <6>[ 1.700550] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>[ 1.700552] usb 2-2: Product: Compaq USB Keyboard <6>[ 1.700554] usb 2-2: Manufacturer: CHICONY <6>[ 1.700638] usb 2-2: configuration #1 chosen from 1 choice <6>[ 1.718797] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2 <6>[ 1.718861] generic-usb 0003:03F0:0024.0003: input,hidraw2: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:1d.0-2/input0 <6>[ 6.182500] udev: starting version 146 <6>[ 6.299540] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded <6>[ 6.299564] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 <7>[ 6.299606] r8169 0000:01:00.0: setting latency timer to 64 <7>[ 6.299660] alloc irq_desc for 27 on node 0 <7>[ 6.299662] alloc kstat_irqs on node 0 <7>[ 6.299677] r8169 0000:01:00.0: irq 27 for MSI/MSI-X <6>[ 6.300220] eth0: RTL8101e at 0xffffc9000107a000, 00:19:66:61:ea:40, XID 34200000 IRQ 27 <6>[ 6.499462] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 <6>[ 6.499511] ACPI: Power Button [PWRF] <6>[ 6.499580] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 <6>[ 6.499607] ACPI: Power Button [PWRB] <5>[ 6.540071] sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>[ 6.540103] scsi 0:0:1:0: Attached scsi generic sg1 type 5 <5>[ 6.540137] sd 2:0:0:0: Attached scsi generic sg2 type 0 <5>[ 6.540168] sd 2:0:1:0: Attached scsi generic sg3 type 0 <5>[ 6.540197] sd 3:0:1:0: Attached scsi generic sg4 type 0 <5>[ 6.947315] intel_rng: FWH not detected <6>[ 6.947626] input: PC Speaker as /devices/platform/pcspkr/input/input5 <6>[ 7.065072] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 <4>[ 7.180179] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray <6>[ 7.180183] Uniform CD-ROM driver Revision: 3.20 <7>[ 7.180274] sr 0:0:1:0: Attached scsi CD-ROM sr0 <6>[ 7.466948] parport_pc 00:06: reported by Plug and Play ACPI <6>[ 7.466995] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] <6>[ 7.799736] iTCO_vendor_support: vendor-support=0 <6>[ 7.812676] ppdev: user-space parallel port driver <6>[ 7.910726] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 <6>[ 7.910800] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) <6>[ 7.910846] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) <7>[ 7.932984] ALSA /usr/src/packages/BUILD/kernel- desktop-2.6.31.12/linux-2.6.31/sound/pci/ctxfi/ctatc.c:1265: ctxfi: chip 20K1 model Unknown (1102:0021) is found <7>[ 7.933008] alloc irq_desc for 22 on node 0 <7>[ 7.933010] alloc kstat_irqs on node 0 <6>[ 7.933017] SB-XFi 0000:04:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 <6>[ 7.935703] Linux video capture interface: v2.00 <6>[ 7.996152] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>[ 7.996170] HDA Intel 0000:00:1b.0: setting latency timer to 64 <6>[ 8.067563] hda_codec: ALC662 rev1: BIOS auto-probing. <7>[ 8.067569] ALSA /usr/src/packages/BUILD/kernel- desktop-2.6.31.12/linux-2.6.31/sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) <7>[ 8.067573] ALSA /usr/src/packages/BUILD/kernel- desktop-2.6.31.12/linux-2.6.31/sound/pci/hda/hda_codec.c:3885: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <7>[ 8.067577] ALSA /usr/src/packages/BUILD/kernel- desktop-2.6.31.12/linux-2.6.31/sound/pci/hda/hda_codec.c:3889: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) <7>[ 8.067581] ALSA /usr/src/packages/BUILD/kernel- desktop-2.6.31.12/linux-2.6.31/sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0 <7>[ 8.067584] ALSA /usr/src/packages/BUILD/kernel- desktop-2.6.31.12/linux-2.6.31/sound/pci/hda/hda_codec.c:3901: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0 <7>[ 8.069351] ALSA /usr/src/packages/BUILD/kernel- desktop-2.6.31.12/linux-2.6.31/sound/pci/hda/patch_realtek.c:1284: realtek: No valid SSID, checking pincfg 0x4006de01 for NID 0x1d <7>[ 8.069355] ALSA /usr/src/packages/BUILD/kernel- desktop-2.6.31.12/linux-2.6.31/sound/pci/hda/patch_realtek.c:1300: realtek: Enabling init ASM_ID=0xde01 CODEC_ID=10ec0662 <6>[ 8.069409] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 <6>[ 8.083360] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded <6>[ 8.094515] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded <6>[ 8.291665] ALSA /usr/src/packages/BUILD/kernel- desktop-2.6.31.12/linux-2.6.31/sound/pci/ctxfi/cttimer.c:424: ctxfi: Use xfi- native timer <6>[ 8.300227] cx8800 0000:04:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 <6>[ 8.300464] cx88[0]: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-T [card=14,autodetected], frontend(s): 1 <6>[ 8.300467] cx88[0]: TV tuner type 4, Radio tuner type -1 <6>[ 8.412047] cx88[0]: Test OK <6>[ 8.456095] input: cx88 IR (KWorld/VStream XPert D as /devices/pci0000:00/0000:00:1e.0/0000:04:02.0/input/input7 <6>[ 8.456170] cx88[0]/0: found at 0000:04:02.0, rev: 5, irq: 23, latency: 32, mmio: 0xfc000000 <4>[ 8.456179] IRQ 23/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs <6>[ 8.456240] cx88[0]/0: registered device video0 [v4l2] <6>[ 8.456286] cx88[0]/0: registered device vbi0 <4>[ 8.456395] cx88[0]/2: cx2388x 8802 Driver Manager <6>[ 8.456414] cx88-mpeg driver manager 0000:04:02.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23 <6>[ 8.456422] cx88[0]/2: found at 0000:04:02.2, rev: 5, irq: 23, latency: 32, mmio: 0xfd000000 <4>[ 8.456434] IRQ 23/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs <6>[ 8.510543] cx88/2: cx2388x dvb driver version 0.0.7 loaded <6>[ 8.510546] cx88/2: registering cx8802 driver, type: dvb access: shared <6>[ 8.510549] cx88[0]/2: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-T [card=14] <6>[ 8.510552] cx88[0]/2: cx2388x based DVB/ATSC card <6>[ 8.510553] cx8802_alloc_frontends() allocating 1 frontend(s) <6>[ 8.580664] DVB: registering new adapter (cx88[0]) <4>[ 8.580668] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB- T)... <6>[ 9.543337] device-mapper: uevent: version 1.0.3 <6>[ 9.543474] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com <6>[ 9.932499] md: md0 stopped. <6>[ 9.959347] md: bind<sdc2> <6>[ 9.959495] md: bind<sdd2> <6>[ 9.978901] md: raid1 personality registered for level 1 <6>[ 9.979101] raid1: raid set md0 active with 2 out of 2 mirrors <6>[ 9.986220] md0: bitmap initialized from disk: read 11/11 pages, set 0 bits <6>[ 9.986223] created bitmap (161 pages) for device md0 <6>[ 10.009642] md0: detected capacity change from 0 to 21476130816 <6>[ 10.011170] md0: unknown partition table <6>[ 10.082399] md: md1 stopped. <6>[ 10.106834] md: bind<sdc5> <6>[ 10.107043] md: bind<sdd5> <6>[ 10.108338] raid1: raid set md1 active with 2 out of 2 mirrors <6>[ 10.119185] md1: bitmap initialized from disk: read 11/11 pages, set 0 bits <6>[ 10.119188] created bitmap (161 pages) for device md1 <6>[ 10.146497] md1: detected capacity change from 0 to 21476098048 <6>[ 10.151872] md1: unknown partition table <6>[ 10.265589] md: md2 stopped. <6>[ 10.276734] md: bind<sdc6> <6>[ 10.276884] md: bind<sdd6> <6>[ 10.280774] raid1: raid set md2 active with 2 out of 2 mirrors <6>[ 10.301146] md2: bitmap initialized from disk: read 12/12 pages, set 4 bits <6>[ 10.301149] created bitmap (191 pages) for device md2 <6>[ 10.334515] md2: detected capacity change from 0 to 204735336448 <6>[ 10.335872] md2: unknown partition table <6>[ 10.498316] md: md3 stopped. <6>[ 10.502663] md: bind<sdd1> <6>[ 10.504431] md: bind<sdc1> <6>[ 10.506019] raid1: raid set md3 active with 2 out of 2 mirrors <6>[ 10.506600] md3: bitmap initialized from disk: read 1/1 pages, set 0 bits <6>[ 10.506602] created bitmap (7 pages) for device md3 <6>[ 10.546086] md3: detected capacity change from 0 to 213811200 <6>[ 10.546863] md3: unknown partition table <6>[ 10.764661] md: md4 stopped. <6>[ 10.771235] md: bind<sdd3> <6>[ 10.772412] md: bind<sdc3> <6>[ 10.773725] raid1: raid set md4 active with 2 out of 2 mirrors <6>[ 10.774274] md4: bitmap initialized from disk: read 1/1 pages, set 0 bits <6>[ 10.774276] created bitmap (9 pages) for device md4 <6>[ 10.802020] md4: detected capacity change from 0 to 2155008000 <6>[ 10.804862] md4: unknown partition table <6>[ 16.089520] loop: module loaded <6>[ 16.125532] kjournald starting. Commit interval 15 seconds <6>[ 16.125729] EXT3 FS on sdb3, internal journal <6>[ 16.125734] EXT3-fs: mounted filesystem with ordered data mode. <6>[ 16.214823] kjournald starting. Commit interval 15 seconds <6>[ 16.358403] EXT3 FS on dm-1, internal journal <6>[ 16.358407] EXT3-fs: mounted filesystem with ordered data mode. <6>[ 16.385189] kjournald starting. Commit interval 15 seconds <6>[ 16.438593] EXT3 FS on dm-0, internal journal <6>[ 16.438597] EXT3-fs: mounted filesystem with ordered data mode. <6>[ 16.475358] kjournald starting. Commit interval 15 seconds <6>[ 16.475440] EXT3 FS on sda1, internal journal <6>[ 16.475443] EXT3-fs: mounted filesystem with ordered data mode. <6>[ 16.506715] fuse init (API version 7.12) <6>[ 16.907679] EXT4-fs (sdb6): barriers enabled <6>[ 16.915740] kjournald2 starting: pid 1105, dev sdb6:8, commit interval 5 seconds <6>[ 16.917391] EXT4-fs (sdb6): internal journal on sdb6:8 <6>[ 16.917394] EXT4-fs (sdb6): delayed allocation enabled <6>[ 16.917397] EXT4-fs: file extents enabled <6>[ 16.918433] EXT4-fs: mballoc enabled <6>[ 16.918446] EXT4-fs (sdb6): mounted filesystem with ordered data mode Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Fri Feb 5 23:56:10 2010 Master Resource Control: previous runlevel: 5, switching to runlevel: 3 service xdm startShutting down service kdm killproc: kill(3036,15) service xdm donedone service earlyxdm start service earlyxdm doneMaster Resource Control: runlevel 3 has been reached killproc: kill(4579,3) Boot logging started on /dev/tty1(/dev/console) at Fri Feb 5 23:56:17 2010 Master Resource Control: previous runlevel: 3, switching to runlevel: 5 service earlyxdm start service earlyxdm done service xdm startStarting service kdm4 startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext4 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG= LANG=en_GB.UTF-8 PREVLEVEL=3 LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD2000JD-00HBB0_WD- WMAL81141515-part5 _=/sbin/startproc DAEMON=/usr/bin/kdm ] service xdm donedone Master Resource Control: runlevel 5 has been reached killproc: kill(4626,3) Boot logging started on /dev/tty1(/dev/console) at Fri Feb 5 23:58:39 2010 Master Resource Control: previous runlevel: 5, switching to runlevel: 3 service xdm start killproc: kill(4658,15) Shutting down service kdmdone service xdm done service earlyxdm start service earlyxdm doneMaster Resource Control: runlevel 3 has been reached killproc: kill(5422,3) Boot logging started on /dev/tty1(/dev/console) at Fri Feb 5 23:58:44 2010 Master Resource Control: previous runlevel: 3, switching to runlevel: 5 service earlyxdm start service earlyxdm done service xdm startStarting service kdm4 startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext4 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG= LANG=en_GB.UTF-8 PREVLEVEL=3 LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD2000JD-00HBB0_WD- WMAL81141515-part5 _=/sbin/startproc DAEMON=/usr/bin/kdm ] service xdm donedone Master Resource Control: runlevel 5 has been reached killproc: kill(5467,3) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org