Finally decided to try SuSE 10.0 - got DVD and installed on my server and did a network install to a test PC (HP Vectra - P3 - 866MHz - 384M RAM). Install on this PC was spectacularly successful. Performance is very snappy and donloading of patches much faster - impressive. So I decided to try it on my HP Compaq nx9110 laptop (512M RAM - P4 - 3200 MHz). The install started OK but when doing the first reboot the PC apparently died. I rebooted in failsafe mode and continued the installation in text mode - my monitor was shown as 'unknown'. Rebooted - same story - black screen - no apparent activity. Booted failsafe mode - works but the kdm login screen takes a loooong time to come up. Attempted to login but the screen went completely crazy - lots of lines and scrambled video. Switched off in hurry. Booted in failsafe mode and edited boot/grub/menu.lst and changed vga=0x317 to vga=normal for normal boot option. Rebooted - now I get lots of text as for a normal boot process - usual stuff - however when I get to ACPI the boot process freezes - the message is ACPI version 20050408 I have now reverted to 9.3 (9.2 also ran on this laptop successfully). How do I determine the version of 10.0 on the DVD ? Any suggestions ? Anybody else using a nx9110 ? Thanx for any help u can give me ... Regards Paul -- Paul Hewlett - CottonPickinMinds - www.cottonpickinminds.co.za Tel: +27 21 852 8812 Cel: +27 84 420 9282 Fax: +27 86 672 0563 --
Hello Paul, try pci=noacpi as kernel boot parameter, it works for me on my hp compaq nx8220. If it fails furthermore try acpi=off but you lost many features with that. Interestingly Ubuntu 5.10 runs without any changes. Mario. Am Dienstag, 1. November 2005 18:11 schrieb Paul Hewlett:
Finally decided to try SuSE 10.0 - got DVD and installed on my server and did a network install to a test PC (HP Vectra - P3 - 866MHz - 384M RAM).
Install on this PC was spectacularly successful. Performance is very snappy and donloading of patches much faster - impressive.
So I decided to try it on my HP Compaq nx9110 laptop (512M RAM - P4 - 3200 MHz). The install started OK but when doing the first reboot the PC apparently died. I rebooted in failsafe mode and continued the installation in text mode - my monitor was shown as 'unknown'. Rebooted - same story - black screen - no apparent activity. Booted failsafe mode - works but the kdm login screen takes a loooong time to come up. Attempted to login but the screen went completely crazy - lots of lines and scrambled video. Switched off in hurry. Booted in failsafe mode and edited boot/grub/menu.lst and changed vga=0x317 to vga=normal for normal boot option. Rebooted - now I get lots of text as for a normal boot process - usual stuff - however when I get to ACPI the boot process freezes - the message is
ACPI version 20050408
I have now reverted to 9.3 (9.2 also ran on this laptop successfully).
How do I determine the version of 10.0 on the DVD ?
Any suggestions ?
Anybody else using a nx9110 ?
Thanx for any help u can give me ...
Regards Paul
-- Paul Hewlett - CottonPickinMinds - www.cottonpickinminds.co.za Tel: +27 21 852 8812 Cel: +27 84 420 9282 Fax: +27 86 672 0563
On Wednesday 02 November 2005 09:53, Mario Goppold wrote:
Hello Paul,
try pci=noacpi as kernel boot parameter, it works for me on my hp compaq nx8220. If it fails furthermore try acpi=off but you lost many features with that. Interestingly Ubuntu 5.10 runs without any changes.
Mario.
Thanx Mario I know about the acpi features and will try them on the weekend. Why does it work with 9.2 and 9.3 and not with 10.0 ? Paul
Am Dienstag, 1. November 2005 18:11 schrieb Paul Hewlett:
Finally decided to try SuSE 10.0 - got DVD and installed on my server and did a network install to a test PC (HP Vectra - P3 - 866MHz - 384M RAM).
Install on this PC was spectacularly successful. Performance is very snappy and donloading of patches much faster - impressive.
So I decided to try it on my HP Compaq nx9110 laptop (512M RAM - P4 - 3200 MHz). The install started OK but when doing the first reboot the PC apparently died. I rebooted in failsafe mode and continued the installation in text mode - my monitor was shown as 'unknown'. Rebooted - same story - black screen - no apparent activity. Booted failsafe mode - works but the kdm login screen takes a loooong time to come up. Attempted to login but the screen went completely crazy - lots of lines and scrambled video. Switched off in hurry. Booted in failsafe mode and edited boot/grub/menu.lst and changed vga=0x317 to vga=normal for normal boot option. Rebooted - now I get lots of text as for a normal boot process - usual stuff - however when I get to ACPI the boot process freezes - the message is
ACPI version 20050408
I have now reverted to 9.3 (9.2 also ran on this laptop successfully).
How do I determine the version of 10.0 on the DVD ?
Any suggestions ?
Anybody else using a nx9110 ?
Thanx for any help u can give me ...
Regards Paul
-- Paul Hewlett - CottonPickinMinds - www.cottonpickinminds.co.za Tel: +27 21 852 8812 Cel: +27 84 420 9282 Fax: +27 86 672 0563
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-unsubscribe@opensuse.org For additional commands, e-mail: opensuse-help@opensuse.org
-- Paul Hewlett - CottonPickinMinds - www.cottonpickinminds.co.za Tel: +27 21 852 8812 Cel: +27 84 420 9282 Fax: +27 86 672 0563 --
Hi Paul I dont know why. I've tried to port the patches form Ubuntu 2.6.12 to SuSE 2.6.13 but with no luck. Mario. Am Mittwoch, 2. November 2005 10:12 schrieb Paul Hewlett:
On Wednesday 02 November 2005 09:53, Mario Goppold wrote:
Hello Paul,
try pci=noacpi as kernel boot parameter, it works for me on my hp compaq nx8220. If it fails furthermore try acpi=off but you lost many features with that. Interestingly Ubuntu 5.10 runs without any changes.
Mario.
Thanx Mario
I know about the acpi features and will try them on the weekend. Why does it work with 9.2 and 9.3 and not with 10.0 ?
Paul
...
participants (2)
-
Mario Goppold
-
Paul Hewlett