Hi, guys... I just installed SuSE 8.0 to Dell Inspiron 5000e (Notebook, 3com 574TX Ethernet card). The problem is that I can't use an internet even though the system seems to detect my pcmcia card. I could see this message, "Sep 16 19:32:37 linux dhcpcd[743]: timed out waiting for a valid DHCP server response" Could you tell me what I have to do...? By the way, I'm using a Cable modem (DHCP) Thanks, Attatches, tail -50f /var/log/messages Sep 16 19:32:32 linux cardmgr[691]: could not adjust resource: IO ports 0x100-0x4ff: Device or resource busy Sep 16 19:32:32 linux cardmgr[691]: could not adjust resource: memory 0xc0000-0xfffff: Input/output error Sep 16 19:32:32 linux cardmgr[691]: could not adjust resource: memory 0x60000000-0x60ffffff: Input/output error Sep 16 19:32:32 linux cardmgr[691]: could not adjust resource: memory 0xa0000000-0xa0ffffff: Input/output error Sep 16 19:32:32 linux cardmgr[691]: could not adjust resource: IO ports 0xa00-0xaff: Device or resource busy ... Sep 16 19:32:32 linux cardmgr[691]: socket 1: 3Com 572/574 Fast Ethernet Sep 16 19:32:32 linux cardmgr[691]: executing: 'insmod -v /lib/modules/2.4.18-4GB//pcmcia/3c574_cs.o' Sep 16 19:32:32 linux cardmgr[691]: + Using /lib/modules/2.4.18-4GB//pcmcia/3c574_cs.o Sep 16 19:32:32 linux cardmgr[691]: + Symbol version prefix '' Sep 16 19:32:32 linux cardmgr[691]: executing: './network start eth0' Sep 16 19:32:32 linux kernel: eth0: 3C574-TX Fast EtherLink PC Card at io 0x300, irq 3, hw_addr 00:10:4B:F4:9F:74. ... Sep 16 19:32:35 linux kernel: PCI: Found IRQ 5 for device 00:08.0 Sep 16 19:32:35 linux kernel: PCI: Sharing IRQ 5 with 00:07.2 Sep 16 19:32:35 linux kernel: PCI: Sharing IRQ 5 with 00:10.0 Sep 16 19:32:35 linux kernel: eth0: found link beat Sep 16 19:32:35 linux kernel: eth0: autonegotiation complete: 100baseT-FD selected Sep 16 19:32:35 linux kernel: es1968: clocking to 48000 Sep 16 19:32:35 linux sshd[811]: Server listening on :: port 22. Sep 16 19:32:35 linux kernel: VFS: Disk change detected on device sr(11,0) Sep 16 19:32:36 linux /etc/hotplug/usb.agent[475]: Can't ignore signal CHLD, forcing to default. Sep 16 19:32:37 linux dhcpcd[743]: timed out waiting for a valid DHCP server response Sep 16 19:32:38 linux modify_resolvconf: restored /etc/resolv.conf.saved.by.dhcpcd to /etc/resolv.conf Sep 16 19:32:38 linux modify_resolvconf: Service dhcpcd modified /etc/resolv.conf. See info block in this file Sep 16 19:32:38 linux /usr/sbin/cron[989]: (CRON) STARTUP (fork ok) Sep 16 19:32:39 linux /etc/hotplug/net.agent[695]: Interface eth0 is handled by service PCMCIA ... exiting Sep 16 19:32:41 linux cardmgr[691]: + Starting DHCP Client Daemon on eth0... . . . . . . . no IP address yet... backgrounding. Sep 16 19:32:49 linux /etc/hotplug/net.agent[813]: No HW description found ... exiting lsmod Module Size Used by Not tainted snd-pcm-oss 45152 0 (autoclean) snd-mixer-oss 11136 1 (autoclean) st 25844 0 (autoclean) (unused) snd-es1968 16388 1 ipv6 123424 -1 (autoclean) snd-pcm 58528 0 [snd-pcm-oss snd-es1968] snd-timer 11456 0 [snd-pcm] snd-ac97-codec 24196 0 [snd-es1968] sg 23620 0 (autoclean) snd-mpu401-uart 3504 0 [snd-es1968] snd-rawmidi 13536 0 [snd-mpu401-uart] snd-seq-device 4336 0 [snd-rawmidi] snd 31720 0 [snd-pcm-oss snd-mixer-oss snd-es1968 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 3268 5 [snd] af_packet 11528 0 (autoclean) 3c574_cs 8420 0 usb-storage 48640 0 ds 6368 2 [3c574_cs] printer 5440 0 yenta_socket 8384 2 pcmcia_core 37984 0 [3c574_cs ds yenta_socket] isa-pnp 27816 0 (unused) joydev 5728 0 (unused) evdev 3904 0 (unused) input 3072 0 [joydev evdev] usb-uhci 20996 0 (unused) usbcore 55136 1 [usb-storage printer usb-uhci] reiserfs 158816 1 lspci -v 00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) Flags: bus master, medium devsel, latency 64 Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 128 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00002000-00002fff Memory behind bridge: f4100000-f41fffff Prefetchable memory behind bridge: f8000000-fbffffff 00:04.0 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: Dell Computer Corporation: Unknown device 00cc Flags: bus master, medium devsel, latency 168, IRQ 11 Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff 16-bit legacy interface ports at 0001 00:04.1 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: Dell Computer Corporation: Unknown device 00cc Flags: bus master, medium devsel, latency 168, IRQ 11 Memory at 10001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 10c00000-10fff000 (prefetchable) Memory window 1: 11000000-113ff000 I/O window 0: 00004800-000048ff I/O window 1: 00004c00-00004cff 16-bit legacy interface ports at 0001 00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) Flags: bus master, medium devsel, latency 0 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 64 I/O ports at 1090 [size=16] 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Flags: bus master, medium devsel, latency 64, IRQ 5 I/O ports at 1060 [size=32] 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03) Flags: medium devsel, IRQ 9 00:10.0 Communication controller: Lucent Microelectronics WinModem 56k (rev 01) Subsystem: Action Tec Electronics Inc: Unknown device 2000 Flags: medium devsel, IRQ 5 Memory at f4000000 (32-bit, non-prefetchable) [size=256] I/O ports at 1080 [size=8] I/O ports at 1800 [size=256] Capabilities: [f8] Power Management version 2
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Log shows the NIC module was loaded successfully. And no apparent errors with the DHCP client starting up. First, verify that you can ping the loopback address 127.0.0.1. If successful, try pinging the DHCP server. If not, then it is probably your cabling. Change it out..and try the DHCP server again. Thomas Jones i-Null.com Network Administrator On Monday 16 September 2002 19:58, CK Shin wrote:
Hi, guys... I just installed SuSE 8.0 to Dell Inspiron 5000e (Notebook, 3com 574TX Ethernet card). The problem is that I can't use an internet even though the system seems to detect my pcmcia card. I could see this message, "Sep 16 19:32:37 linux dhcpcd[743]: timed out waiting for a valid DHCP server response" Could you tell me what I have to do...? By the way, I'm using a Cable modem (DHCP)
Thanks,
Attatches, tail -50f /var/log/messages Sep 16 19:32:32 linux cardmgr[691]: could not adjust resource: IO ports 0x100-0x4ff: Device or resource busy Sep 16 19:32:32 linux cardmgr[691]: could not adjust resource: memory 0xc0000-0xfffff: Input/output error Sep 16 19:32:32 linux cardmgr[691]: could not adjust resource: memory 0x60000000-0x60ffffff: Input/output error Sep 16 19:32:32 linux cardmgr[691]: could not adjust resource: memory 0xa0000000-0xa0ffffff: Input/output error Sep 16 19:32:32 linux cardmgr[691]: could not adjust resource: IO ports 0xa00-0xaff: Device or resource busy ... Sep 16 19:32:32 linux cardmgr[691]: socket 1: 3Com 572/574 Fast Ethernet Sep 16 19:32:32 linux cardmgr[691]: executing: 'insmod -v /lib/modules/2.4.18-4GB//pcmcia/3c574_cs.o' Sep 16 19:32:32 linux cardmgr[691]: + Using /lib/modules/2.4.18-4GB//pcmcia/3c574_cs.o Sep 16 19:32:32 linux cardmgr[691]: + Symbol version prefix '' Sep 16 19:32:32 linux cardmgr[691]: executing: './network start eth0' Sep 16 19:32:32 linux kernel: eth0: 3C574-TX Fast EtherLink PC Card at io 0x300, irq 3, hw_addr 00:10:4B:F4:9F:74. ... Sep 16 19:32:35 linux kernel: PCI: Found IRQ 5 for device 00:08.0 Sep 16 19:32:35 linux kernel: PCI: Sharing IRQ 5 with 00:07.2 Sep 16 19:32:35 linux kernel: PCI: Sharing IRQ 5 with 00:10.0 Sep 16 19:32:35 linux kernel: eth0: found link beat Sep 16 19:32:35 linux kernel: eth0: autonegotiation complete: 100baseT-FD selected Sep 16 19:32:35 linux kernel: es1968: clocking to 48000 Sep 16 19:32:35 linux sshd[811]: Server listening on :: port 22. Sep 16 19:32:35 linux kernel: VFS: Disk change detected on device sr(11,0) Sep 16 19:32:36 linux /etc/hotplug/usb.agent[475]: Can't ignore signal CHLD, forcing to default. Sep 16 19:32:37 linux dhcpcd[743]: timed out waiting for a valid DHCP server response Sep 16 19:32:38 linux modify_resolvconf: restored /etc/resolv.conf.saved.by.dhcpcd to /etc/resolv.conf Sep 16 19:32:38 linux modify_resolvconf: Service dhcpcd modified /etc/resolv.conf. See info block in this file Sep 16 19:32:38 linux /usr/sbin/cron[989]: (CRON) STARTUP (fork ok) Sep 16 19:32:39 linux /etc/hotplug/net.agent[695]: Interface eth0 is handled by service PCMCIA ... exiting Sep 16 19:32:41 linux cardmgr[691]: + Starting DHCP Client Daemon on eth0... . . . . . . . no IP address yet... backgrounding. Sep 16 19:32:49 linux /etc/hotplug/net.agent[813]: No HW description found ... exiting
lsmod Module Size Used by Not tainted snd-pcm-oss 45152 0 (autoclean) snd-mixer-oss 11136 1 (autoclean) st 25844 0 (autoclean) (unused) snd-es1968 16388 1 ipv6 123424 -1 (autoclean) snd-pcm 58528 0 [snd-pcm-oss snd-es1968] snd-timer 11456 0 [snd-pcm] snd-ac97-codec 24196 0 [snd-es1968] sg 23620 0 (autoclean) snd-mpu401-uart 3504 0 [snd-es1968] snd-rawmidi 13536 0 [snd-mpu401-uart] snd-seq-device 4336 0 [snd-rawmidi] snd 31720 0 [snd-pcm-oss snd-mixer-oss snd-es1968 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 3268 5 [snd] af_packet 11528 0 (autoclean) 3c574_cs 8420 0 usb-storage 48640 0 ds 6368 2 [3c574_cs] printer 5440 0 yenta_socket 8384 2 pcmcia_core 37984 0 [3c574_cs ds yenta_socket] isa-pnp 27816 0 (unused) joydev 5728 0 (unused) evdev 3904 0 (unused) input 3072 0 [joydev evdev] usb-uhci 20996 0 (unused) usbcore 55136 1 [usb-storage printer usb-uhci] reiserfs 158816 1
lspci -v 00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) Flags: bus master, medium devsel, latency 64 Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 128 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00002000-00002fff Memory behind bridge: f4100000-f41fffff Prefetchable memory behind bridge: f8000000-fbffffff
00:04.0 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: Dell Computer Corporation: Unknown device 00cc Flags: bus master, medium devsel, latency 168, IRQ 11 Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff 16-bit legacy interface ports at 0001
00:04.1 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: Dell Computer Corporation: Unknown device 00cc Flags: bus master, medium devsel, latency 168, IRQ 11 Memory at 10001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 10c00000-10fff000 (prefetchable) Memory window 1: 11000000-113ff000 I/O window 0: 00004800-000048ff I/O window 1: 00004c00-00004cff 16-bit legacy interface ports at 0001
00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 64 I/O ports at 1090 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Flags: bus master, medium devsel, latency 64, IRQ 5 I/O ports at 1060 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03) Flags: medium devsel, IRQ 9
00:10.0 Communication controller: Lucent Microelectronics WinModem 56k (rev 01) Subsystem: Action Tec Electronics Inc: Unknown device 2000 Flags: medium devsel, IRQ 5 Memory at f4000000 (32-bit, non-prefetchable) [size=256] I/O ports at 1080 [size=8] I/O ports at 1800 [size=256] Capabilities: [f8] Power Management version 2
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE9hoDO9w7alPkpvvsRAnLIAKDHveU49UeiQbN6U8PoerzyJnyS1gCgiLQp FsuKgdAKrkLqy3/bBzqDuJY= =MG7U -----END PGP SIGNATURE-----
CK Shin wrote:
The problem is that I can't use an internet even though the system seems to detect my pcmcia card. I could see this message, "Sep 16 19:32:37 linux dhcpcd[743]: timed out waiting for a valid DHCP server response" Could you tell me what I have to do...? By the way, I'm using a Cable modem (DHCP)
You could try making dhcpcd wait longer, but I would suggest uninstalling dhcpcd and using the ISC dhclient instead. It has worked well for me here (with cable internet), when dhcpcd wouldn't. YMMV -- Joe & Sesil Morris New Tribes Mission Email Address: Joe_Morris@ntm.org Web Address: http://www.mydestiny.net/~joe_morris Registered Linux user 231871 God said, I AM that I AM. I say, by the grace God, I am what I am.
participants (3)
-
CK Shin -
Joe & Sesil Morris (NTM) -
Thomas Jones