RE: [opensuse] The smbfs/cifs fiasco in 10.2
nslookup lactarius
Perhaps just the hostname cannot be looked up using DNS?
Yes, that's the immediate cause of the problem, but I don't know a simple cure for it since I'm using DHCP for the IP addresses of my local net. And it shouldn't be a problem anyway since (a) it wasn't a problem in 10.1, and (b) Konqueror has no trouble finding the lactarius host using the smb: protocol. Replace the hostname of the windows box with an IP address. //10.0.0.1/sharename -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
I hate to admit it, but I cannot remember how to kill the opensuse screen that comes up to replace the native KDE login screen. Someone gave me that info here recently but of course the email is gone. So is my memory. The process sure isn't intuitive. I've looked in a lot of places, but obviously not the right one yet. Fred -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sunday 04 March 2007 16:27, Stevens wrote:
I hate to admit it, but I cannot remember how to kill the opensuse screen that comes up to replace the native KDE login screen. Someone gave me that info here recently but of course the email is gone. So is my memory.
When you say "native KDE login screen", are you talking about the screen where you fill in your username and password, or do you mean the screen that comes after that (the login splash)? If the former, then I'm not sure what you mean by "opensuse screen" If the latter, then you should go to the KDE control center, "Appearances and themes", "Splash screen" and select one of the other (or download one from kde-look.org and install/use) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sunday 04 March 2007 08:27, Stevens wrote:
I hate to admit it, but I cannot remember how to kill the opensuse screen that comes up to replace the native KDE login screen. Someone gave me that info here recently but of course the email is gone. So is my memory.
The process sure isn't intuitive. I've looked in a lot of places, but obviously not the right one yet.
I think you may be referring to the last entry in /etc/sysconfig/displaymanager To be able to revert to the generic KDE greeter -- jim barnes -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sunday 04 March 2007 09:42, Anders Johansson wrote:
When you say "native KDE login screen", are you talking about the screen where you fill in your username and password, or do you mean the screen that comes after that (the login splash)?
I'm talking about the screen that has the login/passwd/session type etc in it, that is blue and says opensuse that replaces the KDE intro splash after a split second. I believe the normal process is something like KDE starts, displays a splash image that I select in the "System Administration, Login Manager, Background", then a smaller login window is centered on that. That last part, the smaller login window, is NOT the default for opensuse. Instead, it is replaced by a full screen blue opensuse login window. I changed it back to KDE standard on my other box last month after some help here, but I forgot what I did and evidently flushed the email.
If the latter, then you should go to the KDE control center, "Appearances and themes", "Splash screen" and select one of the other (or download one from kde-look.org and install/use)
That setting is "none" and has no effect on the problem. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sunday 04 March 2007 17:18, Stevens wrote:
On Sunday 04 March 2007 09:42, Anders Johansson wrote:
When you say "native KDE login screen", are you talking about the screen where you fill in your username and password, or do you mean the screen that comes after that (the login splash)?
I'm talking about the screen that has the login/passwd/session type etc in it, that is blue and says opensuse that replaces the KDE intro splash after a split second. I believe the normal process is something like KDE starts, displays a splash image that I select in the "System Administration, Login Manager, Background", then a smaller login window is centered on that. That last part, the smaller login window, is NOT the default for opensuse. Instead, it is replaced by a full screen blue opensuse login window. I changed it back to KDE standard on my other box last month after some help here, but I forgot what I did and evidently flushed the email.
Evidently you're referring to the kdm theme. Edit /etc/sysconfig/displaymanager and set DISPLAYMANAGER_KDM_THEME to "" and run SuSEconfig --module xdm and "rcxdm restart" -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sunday 04 March 2007 10:29, Anders Johansson wrote:
Evidently you're referring to the kdm theme.
Edit /etc/sysconfig/displaymanager and set DISPLAYMANAGER_KDM_THEME to "" and run SuSEconfig --module xdm and "rcxdm restart"
That was it!!! Thanks Anders and Jim for the answer. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Stevens wrote:
On Sunday 04 March 2007 09:42, Anders Johansson wrote:
When you say "native KDE login screen", are you talking about the screen where you fill in your username and password, or do you mean the screen that comes after that (the login splash)?
I'm talking about the screen that has the login/passwd/session type etc in it, that is blue and says opensuse that replaces the KDE intro splash after a split second. I believe the normal process is something like KDE starts, displays a splash image that I select in the "System Administration, Login Manager, Background", then a smaller login window is centered on that. That last part, the smaller login window, is NOT the default for opensuse. Instead, it is replaced by a full screen blue opensuse login window. I changed it back to KDE standard on my other box last month after some help here, but I forgot what I did and evidently flushed the email.
If the latter, then you should go to the KDE control center, "Appearances and themes", "Splash screen" and select one of the other (or download one from kde-look.org and install/use)
That setting is "none" and has no effect on the problem.
Thank you for changing the name of the thread. Everyone was very helpful in solving my problem, but I really regret the Subject line of my original message. Stephen P. Molnar, Ph.D. Life is a fuzzy set Foundation for Chemistry Stochastic and multivariate http://www.geocities.com/FoundationForChemistry -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
--- "Stephen P. Molnar, Ph.D."
Thank you for changing the name of the thread. Everyone was very helpful in solving my problem, but I really regret the Subject line of my original message.
Foget about it. I have. ;-) -- imotgm ____________________________________________________________________________________ Looking for earth-friendly autos? Browse Top Cars by "Green Rating" at Yahoo! Autos' Green Center. http://autos.yahoo.com/green_center/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
What is the difference between "init 5" and "startx" as it pertains to starting the X system? I ask because my system (on boot) now goes to init 5, does not start X windows, does not give me any reason why, then just sits there. If I log in as any user, issue "startx", X starts just fine, KDE comes up, no problem. This started as soon as I removed beryl. There is a clue there, right ;-) Actually, when the system is going to init 5, the last thing it says is "starting kdm". ps -ef |grep kdm says it is running. Any thoughts? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Mon, Mar 05, 2007 at 05:28:23PM -0600, Stevens wrote:
What is the difference between "init 5" and "startx" as it pertains to starting the X system? I ask because my system (on boot) now goes to init 5, does not start X windows, does not give me any reason why, then just sits there. If I log in as any user, issue "startx", X starts just fine, KDE comes up, no problem.
This started as soon as I removed beryl. There is a clue there, right ;-)
Actually, when the system is going to init 5, the last thing it says is "starting kdm".
ps -ef |grep kdm says it is running.
My 10.2 system just started doing this too, and I haven't been able to find any error messages that would explain why it has decided to act this way. Michael -- If a kid asks where rain comes from, I think a cute thing to tell him is "God is crying." And if he asks why God is crying, another cute thing to tell him is "Probably because of something you did." -- Jack Handy San Francisco, CA -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Tuesday 06 March 2007 00:28, Stevens wrote:
What is the difference between "init 5" and "startx" as it pertains to starting the X system? I ask because my system (on boot) now goes to init 5, does not start X windows, does not give me any reason why, then just sits there. If I log in as any user, issue "startx", X starts just fine, KDE comes up, no problem.
This started as soon as I removed beryl. There is a clue there, right ;-)
Actually, when the system is going to init 5, the last thing it says is "starting kdm".
ps -ef |grep kdm says it is running.
Any thoughts?
Does /var/log/kdm.log perhaps say why it's failing? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Sunday 2007-03-04 at 20:24 -0800, frank nelson wrote:
--- "Stephen P. Molnar, Ph.D." wrote:
Thank you for changing the name of the thread. Everyone was very helpful in solving my problem, but I really regret the Subject line of my original message.
Foget about it. I have. ;-)
ROTFL X'-) (Sorry! :-) ) - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFF7LN0tTMYHG2NR9URAgyxAJ0SExFTVqLEodDnQ0UBsdgzX7loXQCeIyiQ RaY853OjHcE3sxb8TYXDVcQ= =zN/h -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 2007. 03. 06., Tuesday 00:28, Stevens wrote:
What is the difference between "init 5" and "startx" as it pertains to starting the X system? I ask because my system (on boot) now goes to init 5, does not start X windows, does not give me any reason why, then just sits there. If I log in as any user, issue "startx", X starts just fine, KDE comes up, no problem. I had the same a few weeks ago. I could fix it in the sysconfig editor but am not sure how. There was a reference to xgl which I had to change, I think it's: Desktop / Display manager / DISPLAYMANAGER_XSERVER Check if it is set to Xgl and if so, change it to Xorg - this is what I have now. HTH Tom -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Mar 05, 07 17:28:23 -0600, Stevens wrote:
This started as soon as I removed beryl. There is a clue there, right ;-)
Maybe you're hitting bug #227660 (if you have been using Xgl, that is).
In that case make sure that in /etc/sysconfig/displaymanager
DISPLAYMANAGER_XSERVER="Xorg" is set correctly.
Matthias
--
Matthias Hopf
Hi Gents/Ladies, I am looking for a monitoring software for Linux, I know about Big Brother, but I am looking for something like gkrellm, this software gives me reading for heat, fans working, but it runs local, does anybody knows something like this that can be monitored remotely? Thanks Jose -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Tuesday 06 March 2007 02:39, Tom Burt wrote:
On 2007. 03. 06., Tuesday 00:28, Stevens wrote:
What is the difference between "init 5" and "startx" as it pertains to starting the X system? I ask because my system (on boot) now goes to init 5, does not start X windows, does not give me any reason why, then just sits there. If I log in as any user, issue "startx", X starts just fine, KDE comes up, no problem.
I had the same a few weeks ago. I could fix it in the sysconfig editor but am not sure how. There was a reference to xgl which I had to change, I think it's: Desktop / Display manager / DISPLAYMANAGER_XSERVER Check if it is set to Xgl and if so, change it to Xorg - this is what I have now. HTH Tom
Thanks, Tom and Matthias for your help. That was it. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
The help on this forum has been tremendous. I'll try it again, maybe someone knows why... I installed Suse 10.2 on an old P3/900 box that previously had 9.1 on it. Both / and /home partitions were reiser but I reformatted / as ext3 and kept /home unchanged. I expected a few configuration problems because of the new version, which I had, but there is some weird s.. stuff happening, too. Like, I cannot install Firefox plugins or extensions as a user but can as root. OK, it's a permissions problem. But where? I don't get that b.s. from my main system which also has 10.2, but that was a fresh install all the way. I have stared and compared until I'm damn near blind and I am just baffled. Do I need to just put /home on the usb stick and start /home from scratch or is that too drastic? I can't imagine that being necessary. What happens if I blow away the /home partition? How do I then create the root user? Something about booting to the install disk in repair mode, I think. Any thoughts would be welcome. Fred -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Tuesday 2007-03-06 at 22:51 -0600, Stevens wrote:
What happens if I blow away the /home partition? How do I then create the root user? Something about booting to the install disk in repair mode, I think.
Mr. root does not use /home, he uses /root. So yes, of course you can blow /home and still log in as root. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFF7puetTMYHG2NR9URAhRAAJsEWLD48QifLseQN5XMzycLAVAifACZAXXi 2kXjjJheJM8Ep6zHwX5BxCw= =ijnI -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Tuesday 2007-03-06 at 11:26 -0500, Jose wrote: First, you hijacked a thread (Subject: Re: [opensuse] X start help). Please, don't.
I am looking for a monitoring software for Linux, I know about Big Brother, but I am looking for something like gkrellm, this software gives me reading for heat, fans working, but it runs local, does anybody knows something like this that can be monitored remotely?
gkrellm can do remote monitoring (man gkrellm). - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFF7pxXtTMYHG2NR9URAmmmAKCNOPOoIopUbYgoGoTtmtSRZEQ9AwCfSLs4 uvgaitivQS+ZQo/qywBxkkA= =aSpR -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Carlos E. R. wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
The Tuesday 2007-03-06 at 11:26 -0500, Jose wrote:
First, you hijacked a thread (Subject: Re: [opensuse] X start help). Please, don't.
I am looking for a monitoring software for Linux, I know about Big Brother, but I am looking for something like gkrellm, this software gives me reading for heat, fans working, but it runs local, does anybody knows something like this that can be monitored remotely?
gkrellm can do remote monitoring (man gkrellm).
- -- Cheers, Carlos E. R.
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76
iD8DBQFF7pxXtTMYHG2NR9URAmmmAKCNOPOoIopUbYgoGoTtmtSRZEQ9AwCfSLs4 uvgaitivQS+ZQo/qywBxkkA= =aSpR -----END PGP SIGNATURE-----
Hi Carlos, My sincere apologies about that, didn't mean to. Thanks for the suggestion, I would look into the help file Jose -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Wednesday 07 March 2007 05:51, Stevens wrote:
The help on this forum has been tremendous. I'll try it again, maybe someone knows why...
I installed Suse 10.2 on an old P3/900 box that previously had 9.1 on it. Both / and /home partitions were reiser but I reformatted / as ext3 and kept /home unchanged. I expected a few configuration problems because of the new version, which I had, but there is some weird s.. stuff happening, too.
First of all, please choose better subjects for your mails. They should in some way reflect your question, to make it easier for people to find interesting mail threads Secondly, between 9.1 and 10.2, suse changed user IDs. Before, a user got uid 100 and up by default, in 10.2 he gets 1000 and up. So odds are your old /home is simply owned by the wrong user. Simply log in as root and run chmod -R <username>.users /home/<username> and see if that helps -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Wednesday 07 March 2007 18:47, I wrote:
chmod -R <username>.users /home/<username>
Oops, that should of course be chown -R <username>.users /home/<username> -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Wednesday 2007-03-07 at 18:47 +0100, Anders Johansson wrote:
Secondly, between 9.1 and 10.2, suse changed user IDs. Before, a user got uid 100 and up by default, in 10.2 he gets 1000 and up. So odds are your old /home is simply owned by the wrong user.
That situation is easy enough to detect, simply by isuing the command: ls -l /home/<username> If it comes out that files are owned by some number, instead of a username, then you are right.
Simply log in as root and run
chmod -R <username>.users /home/<username>
and see if that helps
Or change the uid in the passwd file. My main user is still #100. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFF7whOtTMYHG2NR9URArjZAJ0XHUQ0AMQnib+2cmh2bu/aTH/LeACeLhoV G4cROWOGb9g83XEAbk26yXA= =xRNp -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Wednesday 07 March 2007 12:57:09 pm Anders Johansson wrote:
On Wednesday 07 March 2007 18:47, I wrote:
chmod -R <username>.users /home/<username>
Oops, that should of course be
chown -R <username>.users /home/<username>
No, it should be: chown -R <username>:users /home/<username> Fred -- Remember, a consumer is a customer with no choice. DRM 'manages access' in the same way that jail 'manages freedom.' -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Wednesday 07 March 2007 16:31, Fred A. Miller wrote:
On Wednesday 07 March 2007 12:57:09 pm Anders Johansson wrote:
...
chown -R <username>.users /home/<username>
No, it should be:
chown -R <username>:users /home/<username>
Both the colon and period separators work.
Fred
Randall Schulz -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Wednesday 07 March 2007 16:31, Fred A. Miller wrote:
On Wednesday 07 March 2007 12:57:09 pm Anders Johansson wrote:
On Wednesday 07 March 2007 18:47, I wrote:
chmod -R <username>.users /home/<username>
Oops, that should of course be
chown -R <username>.users /home/<username>
No, it should be:
chown -R <username>:users /home/<username>
It actually doesn't matter. '.' (period) works as well as ':' (colon) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Wed, 7 Mar 2007, Anders Johansson
Secondly, between 9.1 and 10.2, suse changed user IDs. Before, a user got uid 100 and up by default, in 10.2 he gets 1000 and up. So odds are your ^^^ On my 9.0 box, UID 100 is:
privoxy:x:100:101:Daemon user for privoxy:/var/lib/privoxy:/bin/false ^^^ ^^^ UID ||| GID And the first actual user is: davjam:x:500:100:David:/home/davjam:/bin/bash ^^^ ^^^ UID ||| GID As an aside, on my 9.1 box, and all the other SUSE boxes, the same first user is: davjam:x:1000:100:David:/home/davjam:/bin/bash and the only reason for it having a UID starting of 1000 is that I changed it after 10.1 was released. This was so that my UID, and the other users on my systems, could have the same UID across different boxes and thereby eliminate problems with NFS mounted file-systems due to mis-matched UIDs. Regards, David Bolt -- Member of Team Acorn checking nodes at 50 Mnodes/s: http://www.distributed.net/ RISCOS 3.11 | SUSE 10.0 32bit | SUSE 10.1 32bit | openSUSE 10.2 32bit RISCOS 3.6 | SUSE 10.0 64bit | SUSE 10.1 64bit | openSUSE 10.2 64bit TOS 4.02 | SUSE 9.3 32bit | | openSUSE 10.3a1 32bit -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Wednesday 07 March 2007 7:44:05 pm Randall R Schulz wrote:
On Wednesday 07 March 2007 16:31, Fred A. Miller wrote:
On Wednesday 07 March 2007 12:57:09 pm Anders Johansson wrote:
...
chown -R <username>.users /home/<username>
No, it should be:
chown -R <username>:users /home/<username>
Both the colon and period separators work.
I went back and tried it here......nada. Only the full colon. Fred -- Remember, a consumer is a customer with no choice. DRM 'manages access' in the same way that jail 'manages freedom.' -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Wednesday 07 March 2007 19:41, Fred A. Miller wrote:
On Wednesday 07 March 2007 7:44:05 pm Randall R Schulz wrote:
On Wednesday 07 March 2007 16:31, Fred A. Miller wrote:
On Wednesday 07 March 2007 12:57:09 pm Anders Johansson wrote:
...
chown -R <username>.users /home/<username>
No, it should be:
chown -R <username>:users /home/<username>
Both the colon and period separators work.
I went back and tried it here......nada. Only the full colon.
Time to upgrade, then. It works both ways at least as of 10.0. % chown --version chown (GNU coreutils) 5.3.0 Written by David MacKenzie and Jim Meyering. Copyright (C) 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Fred
RRS -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Wednesday 07 March 2007 21:01, Randall R Schulz wrote:
On Wednesday 07 March 2007 19:41, Fred A. Miller wrote:
On Wednesday 07 March 2007 7:44:05 pm Randall R Schulz wrote:
On Wednesday 07 March 2007 16:31, Fred A. Miller wrote:
On Wednesday 07 March 2007 12:57:09 pm Anders Johansson wrote:
...
chown -R <username>.users /home/<username>
No, it should be:
chown -R <username>:users /home/<username>
Both the colon and period separators work.
I went back and tried it here......nada. Only the full colon.
Time to upgrade, then. It works both ways at least as of 10.0.
% chown --version chown (GNU coreutils) 5.3.0 Written by David MacKenzie and Jim Meyering.
Copyright (C) 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Fred
RRS And I have used the period for so long, on Suse systems since 5.0 and Redhat before that, that I by habit always just type a '.' I didn't remember until re-reading the man page that the colon was the defined separator.
On SUSE 9.1: jcunning@jlc:~> chown --version chown (coreutils) 5.2.1 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (15)
-
Anders Johansson
-
Carlos E. R.
-
David Bolt
-
frank nelson
-
Fred A. Miller
-
James D. Parra
-
jim barnes
-
Jim Cunning
-
Jose
-
Matthias Hopf
-
Michael Nelson
-
Randall R Schulz
-
Stephen P. Molnar, Ph.D.
-
Stevens
-
Tom Burt