Microphone input problem, and setting capture???
Hi. I can't get my microphone working...... With Suse 9.1 on a pentium 4 pc and kernel 2.6.5-7.108-default, I am having trouble getting my microphone to work (krecorder, skype). I am using SB Audigy 2 (configured in yast2), and it works well under Win XP on the same pc. The speakers work fine in Linux too. I turned up the mike volume in kmix 2.0.1. However, there is a blank screen under kmix input, and the capture tab in Kamix 0.0.7 is also blank except for a mic boost +20db check box. When I start Kamix I get the warning that no sound card has been configured yet, although it has and yast2 agrees with that. Any suggestions? Sune -- Sune Nørhøj Jespersen
Sune Jespersen wrote:
Hi.
I can't get my microphone working......
With Suse 9.1 on a pentium 4 pc and kernel 2.6.5-7.108-default, I am having trouble getting my microphone to work (krecorder, skype). I am using SB Audigy 2 (configured in yast2), and it works well under Win XP on the same pc. The speakers work fine in Linux too. I turned up the mike volume in kmix 2.0.1. However, there is a blank screen under kmix input, and the capture tab in Kamix 0.0.7 is also blank except for a mic boost +20db check box. When I start Kamix I get the warning that no sound card has been configured yet, although it has and yast2 agrees with that.
Any suggestions? Sune
First of all check what sound modules you have loaded, looks like some are missing. After that use YaST to configure the sound card, see if that works and note what modules are installed if you still have problems. Regards Sid. -- Sid Boyce .... Hamradio G3VBV and keen Flyer =====LINUX ONLY USED HERE=====
Hi I was messing around with various settings, now my sound (headphones) disappeared as well!!! This is output from lsmod|grep snd snd_emu10k1 87816 0 snd_rawmidi 25508 1 snd_emu10k1 snd_pcm 97032 1 snd_emu10k1 snd_timer 25860 1 snd_pcm snd_seq_device 8456 2 snd_emu10k1,snd_rawmidi snd_ac97_codec 62468 1 snd_emu10k1 snd_util_mem 5120 1 snd_emu10k1 snd_hwdep 9860 1 snd_emu10k1 snd 61444 8 snd_emu10k1,snd_rawmidi,snd_pcm,snd_timer,snd_seq_device,snd_ac97_codec,snd_util_mem,snd_hwdep snd_page_alloc 11528 2 snd_emu10k1,snd_pcm soundcore 9056 1 snd I have no idea whether anything is missing or not............... this is from cat /dev/sndstat Sound Driver:3.8.1a-980706 (ALSA v1.0.4 emulation code) Kernel: Linux linux 2.6.5-7.108-default #1 Wed Aug 25 13:34:40 UTC 2004 i686 Config options: 0 Installed drivers: Type 10: ALSA emulation Card config: Sound Blaster Audigy2 (rev.4) at 0xc000, irq 5 Audio devices: 0: EMU10K1 (DUPLEX) Synth devices: 0: Emu10k1 Midi devices: 0: Audigy MPU-401 (UART) Timers: 7: system timer Mixers: 0: SigmaTel STAC9721/23 Does anybody have any ssuggestions? SUNEOn Friday 03 September 2004 12:12, Sid Boyce wrote:
Sune Jespersen wrote:
Hi.
I can't get my microphone working......
With Suse 9.1 on a pentium 4 pc and kernel 2.6.5-7.108-default, I am having trouble getting my microphone to work (krecorder, skype). I am using SB Audigy 2 (configured in yast2), and it works well under Win XP on the same pc. The speakers work fine in Linux too. I turned up the mike volume in kmix 2.0.1. However, there is a blank screen under kmix input, and the capture tab in Kamix 0.0.7 is also blank except for a mic boost +20db check box. When I start Kamix I get the warning that no sound card has been configured yet, although it has and yast2 agrees with that.
Any suggestions? Sune
First of all check what sound modules you have loaded, looks like some are missing. After that use YaST to configure the sound card, see if that works and note what modules are installed if you still have problems. Regards Sid.
-- Sid Boyce .... Hamradio G3VBV and keen Flyer =====LINUX ONLY USED HERE=====
-- Sune Nørhøj Jespersen, Ph.D. Assistant professor (adjunkt) MR-Research Center University of Aarhus Skejby Hospital Brendstrupgaardsvej DK 8200 Aarhus N Denmark Fax: +45 8949 6004 Tel: +45 8949 5264
Sune Jespersen wrote:
Hi.
I can't get my microphone working......
With Suse 9.1 on a pentium 4 pc and kernel 2.6.5-7.108-default, I am having trouble getting my microphone to work (krecorder, skype). I am using SB Audigy 2 (configured in yast2), and it works well under Win XP on the same pc. The speakers work fine in Linux too. I turned up the mike volume in kmix 2.0.1. However, there is a blank screen under kmix input, and the capture tab in Kamix 0.0.7 is also blank except for a mic boost +20db check box. When I start Kamix I get the warning that no sound card has been configured yet, although it has and yast2 agrees with that.
Any suggestions? Sune
I had the same problem. I couldn't get my mic to work until I opened gamix and enabled it there as well as kamix. After that everything works fine. Darrell
participants (3)
-
Darrell Cormier -
Sid Boyce -
Sune Jespersen