[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.12-0.2-default (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP 2010-03-16 21:25:39 +0100 [ 0.000000] Command line: root=/dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part3 repair=1 resume=/dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part6 splash=silent quiet vga=0x317 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000abf00000 (usable) [ 0.000000] BIOS-e820: 00000000abf00000 - 00000000abf15000 (ACPI data) [ 0.000000] BIOS-e820: 00000000abf15000 - 00000000abf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000abf80000 - 00000000b0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000150000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x150000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFE0000000 write-back [ 0.000000] 2 base 00A0000000 mask FFF8000000 write-back [ 0.000000] 3 base 00A8000000 mask FFFC000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000150000000 aka 5376M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000ac000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xabf00 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000abf00000 (usable) [ 0.000000] modified: 00000000abf00000 - 00000000abf15000 (ACPI data) [ 0.000000] modified: 00000000abf15000 - 00000000abf80000 (ACPI NVS) [ 0.000000] modified: 00000000abf80000 - 00000000b0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000150000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000abf00000 [ 0.000000] 0000000000 - 00abe00000 page 2M [ 0.000000] 00abe00000 - 00abf00000 page 4k [ 0.000000] kernel direct mapping tables up to abf00000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000150000000 [ 0.000000] 0100000000 - 0150000000 page 2M [ 0.000000] kernel direct mapping tables up to 150000000 @ b000-12000 [ 0.000000] RAMDISK: 37909000 - 37fef319 [ 0.000000] Compaq Presario V6000: using 0xed I/O delay port [ 0.000000] ACPI: RSDP 00000000000f88f0 00014 (v00 HP ) [ 0.000000] ACPI: RSDT 00000000abf0bc24 00040 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000abf14c15 00074 (v01 HP MCP51M 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 00000000abf0bc64 08FB1 (v01 HP MCP51M 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000abf15fc0 00040 [ 0.000000] ACPI: SSDT 00000000abf14c89 00115 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: MCFG 00000000abf14d9e 0003C (v01 HP MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 00000000abf14dda 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 00000000abf14e12 00050 (v01 HP APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000abf14e62 00028 (v01 HP $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 00000000abf14e8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000150000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000150000000 [ 0.000000] NODE_DATA [000000000000d000 - 0000000000024fff] [ 0.000000] bootmap [0000000000025000 - 000000000004efff] pages 2a [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0150000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001c718b0] TEXT DATA BSS ==> [0001000000 - 0001c718b0] [ 0.000000] #3 [0037909000 - 0037fef319] RAMDISK ==> [0037909000 - 0037fef319] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [0001c72000 - 0001c7217c] BRK ==> [0001c72000 - 0001c7217c] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #7 [000000b000 - 000000d000] PGTABLE ==> [000000b000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000f8920] f8920 [ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff880001e00000-ffff8800057fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00150000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000abf00 [ 0.000000] 0: 0x00100000 -> 0x00150000 [ 0.000000] On node 0 totalpages: 1031832 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 106 pages reserved [ 0.000000] DMA zone: 3830 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 685880 pages, LIFO batch:31 [ 0.000000] Normal zone: 4480 pages used for memmap [ 0.000000] Normal zone: 323200 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000abf00000 - 00000000abf15000 [ 0.000000] PM: Registered nosave memory: 00000000abf15000 - 00000000abf80000 [ 0.000000] PM: Registered nosave memory: 00000000abf80000 - 00000000b0000000 [ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000 [ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:30000000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages at ffff88000584a000, static data 82912 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012910 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part3 repair=1 resume=/dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part6 splash=silent quiet vga=0x317 [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 2fd8000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 3981976k/5505024k available (5507k kernel code, 1377696k absent, 145352k reserved, 4539k data, 1024k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2009.425 MHz processor. [ 0.000014] spurious 8259A interrupt: IRQ7. [ 0.000100] Console: colour dummy device 80x25 [ 0.000104] console [tty0] enabled [ 0.000322] hpet clockevent registered [ 0.000326] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.85 BogoMIPS (lpj=8037700) [ 0.006017] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved [ 0.006130] Security Framework initialized [ 0.006151] AppArmor: AppArmor initialized [ 0.007504] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010041] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011371] Mount-cache hash table entries: 256 [ 0.011537] Initializing cgroup subsys ns [ 0.011542] Initializing cgroup subsys cpuacct [ 0.011546] Initializing cgroup subsys memory [ 0.011564] Initializing cgroup subsys devices [ 0.011566] Initializing cgroup subsys freezer [ 0.011569] Initializing cgroup subsys net_cls [ 0.011596] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.011598] CPU: L2 Cache: 512K (64 bytes/line) [ 0.011602] CPU 0/0x0 -> Node 0 [ 0.011604] tseg: 00abf80000 [ 0.011608] mce: CPU supports 5 MCE banks [ 0.011618] using C1E aware idle routine [ 0.011620] Performance Counters: AMD PMU driver. [ 0.011625] ... version: 0 [ 0.011627] ... bit width: 48 [ 0.011629] ... generic counters: 4 [ 0.011631] ... value mask: 0000ffffffffffff [ 0.011633] ... max period: 00007fffffffffff [ 0.011635] ... fixed-purpose counters: 0 [ 0.011637] ... counter mask: 000000000000000f [ 0.011651] SMP alternatives: switching to UP code [ 0.022049] Freeing SMP alternatives: 34k freed [ 0.022087] ACPI: Core revision 20090521 [ 0.036078] Setting APIC routing to flat [ 0.036613] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.077919] CPU0: AMD Turion(tm) 64 Mobile Technology MK-36 stepping 02 [ 0.080001] Brought up 1 CPUs [ 0.080001] Total of 1 processors activated (4018.85 BogoMIPS). [ 0.080001] CPU0 attaching NULL sched-domain. [ 0.080001] devtmpfs: initialized [ 0.080939] Booting paravirtualized kernel on bare hardware [ 0.081166] regulator: core version 0.5 [ 0.081197] Time: 20:27:59 Date: 03/24/10 [ 0.081265] NET: Registered protocol family 16 [ 0.081417] node 0 link 0: io port [1000, fffff] [ 0.081421] TOM: 00000000b0000000 aka 2816M [ 0.081424] node 0 link 0: mmio [e0000000, efffffff] [ 0.081428] node 0 link 0: mmio [a0000, bffff] [ 0.081431] node 0 link 0: mmio [b0000000, fe0bffff] [ 0.081434] TOM2: 0000000150000000 aka 5376M [ 0.081437] bus: [00,ff] on node 0 link 0 [ 0.081440] bus: 00 index 0 io port: [0, ffff] [ 0.081442] bus: 00 index 1 mmio: [b0000000, ffffffff] [ 0.081445] bus: 00 index 2 mmio: [a0000, bffff] [ 0.081447] bus: 00 index 3 mmio: [150000000, fcffffffff] [ 0.081456] ACPI: bus type pci registered [ 0.081531] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6 [ 0.081534] PCI: MCFG area at e0000000 reserved in E820 [ 0.081872] PCI: Using MMCONFIG at e0000000 - e06fffff [ 0.081875] PCI: Using configuration type 1 for base access [ 0.082872] bio: create slab at 0 [ 0.084533] ACPI: EC: Look up EC in DSDT [ 0.089578] ACPI: BIOS _OSI(Linux) query ignored [ 0.090156] ACPI: Interpreter enabled [ 0.090163] ACPI: (supports S0 S3 S4 S5) [ 0.090192] ACPI: Using IOAPIC for interrupt routing [ 0.090749] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.113310] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.113314] ACPI: EC: driver started in interrupt mode [ 0.113773] ACPI: No dock devices found. [ 0.113946] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.114261] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.114265] pci 0000:00:02.0: PME# disabled [ 0.114304] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.114308] pci 0000:00:03.0: PME# disabled [ 0.114332] pci 0000:00:05.0: reg 10 32bit mmio: [0xb2000000-0xb2ffffff] [ 0.114339] pci 0000:00:05.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] [ 0.114345] pci 0000:00:05.0: reg 1c 64bit mmio: [0xb1000000-0xb1ffffff] [ 0.114352] pci 0000:00:05.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.114545] pci 0000:00:0a.0: reg 10 io port: [0x1d00-0x1d7f] [ 0.114612] pci 0000:00:0a.1: reg 20 io port: [0x3040-0x307f] [ 0.114618] pci 0000:00:0a.1: reg 24 io port: [0x3000-0x303f] [ 0.114645] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.114651] pci 0000:00:0a.1: PME# disabled [ 0.114686] pci 0000:00:0a.3: reg 10 32bit mmio: [0xb0040000-0xb007ffff] [ 0.114787] pci 0000:00:0b.0: reg 10 32bit mmio: [0xb0004000-0xb0004fff] [ 0.114825] pci 0000:00:0b.0: supports D1 D2 [ 0.114828] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.114833] pci 0000:00:0b.0: PME# disabled [ 0.114866] pci 0000:00:0b.1: reg 10 32bit mmio: [0xb0005000-0xb00050ff] [ 0.114903] pci 0000:00:0b.1: supports D1 D2 [ 0.114906] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.114910] pci 0000:00:0b.1: PME# disabled [ 0.114955] pci 0000:00:0d.0: reg 20 io port: [0x3080-0x308f] [ 0.115004] pci 0000:00:0e.0: reg 10 io port: [0x30c0-0x30c7] [ 0.115010] pci 0000:00:0e.0: reg 14 io port: [0x30b4-0x30b7] [ 0.115015] pci 0000:00:0e.0: reg 18 io port: [0x30b8-0x30bf] [ 0.115021] pci 0000:00:0e.0: reg 1c io port: [0x30b0-0x30b3] [ 0.115027] pci 0000:00:0e.0: reg 20 io port: [0x3090-0x309f] [ 0.115032] pci 0000:00:0e.0: reg 24 32bit mmio: [0xb0006000-0xb0006fff] [ 0.115132] pci 0000:00:10.1: reg 10 32bit mmio: [0xb0000000-0xb0003fff] [ 0.115170] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.115174] pci 0000:00:10.1: PME# disabled [ 0.115212] pci 0000:00:14.0: reg 10 32bit mmio: [0xb0008000-0xb0008fff] [ 0.115218] pci 0000:00:14.0: reg 14 io port: [0x30e0-0x30e7] [ 0.115245] pci 0000:00:14.0: supports D1 D2 [ 0.115247] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.115251] pci 0000:00:14.0: PME# disabled [ 0.115393] pci 0000:00:02.0: bridge io port: [0x4000-0x4fff] [ 0.115397] pci 0000:00:02.0: bridge 32bit mmio: [0xb4000000-0xb5ffffff] [ 0.115401] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xd01fffff] [ 0.115436] pci 0000:03:00.0: reg 10 32bit mmio: [0xb6000000-0xb6003fff] [ 0.115485] pci 0000:03:00.0: supports D1 D2 [ 0.115507] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.115573] pci 0000:00:03.0: bridge 32bit mmio: [0xb6000000-0xb7ffffff] [ 0.115621] pci 0000:00:10.0: transparent bridge [ 0.115638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.115792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.115858] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.115912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.164829] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled. [ 0.165106] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 0.165380] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. [ 0.165654] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 0.165928] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 0.166202] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 0.166476] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *11 [ 0.166750] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled. [ 0.167023] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 0.167295] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10 [ 0.167568] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11 [ 0.167840] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 0.168123] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10 [ 0.168396] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled. [ 0.168672] ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled. [ 0.168948] ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled. [ 0.169222] ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled. [ 0.169508] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5 [ 0.169791] ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10 [ 0.170039] SCSI subsystem initialized [ 0.170116] libata version 3.00 loaded. [ 0.170204] usbcore: registered new interface driver usbfs [ 0.170226] usbcore: registered new interface driver hub [ 0.170254] usbcore: registered new device driver usb [ 0.170335] PCI: Using ACPI for IRQ routing [ 0.170699] PCI-DMA: Disabling AGP. [ 0.170789] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.170791] PCI-DMA: using GART IOMMU. [ 0.170796] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.171306] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.171314] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.177397] AppArmor: AppArmor Filesystem Enabled [ 0.177417] pnp: PnP ACPI init [ 0.177437] ACPI: bus type pnp registered [ 0.181786] pnp: PnP ACPI: found 13 devices [ 0.181789] ACPI: ACPI bus type pnp unregistered [ 0.181802] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved [ 0.181811] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.181815] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.181819] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.181823] system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.181830] system 00:03: iomem range 0xe0000000-0xefffffff has been reserved [ 0.181837] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.181840] system 00:04: ioport range 0x1080-0x10ff has been reserved [ 0.181844] system 00:04: ioport range 0x1400-0x147f has been reserved [ 0.181847] system 00:04: ioport range 0x1480-0x14ff has been reserved [ 0.181850] system 00:04: ioport range 0x1800-0x187f has been reserved [ 0.181854] system 00:04: ioport range 0x1880-0x18ff has been reserved [ 0.181857] system 00:04: ioport range 0x2000-0x203f has been reserved [ 0.181864] system 00:05: ioport range 0x360-0x361 has been reserved [ 0.181867] system 00:05: ioport range 0x380-0x383 has been reserved [ 0.181871] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.186666] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.186670] pci 0000:00:02.0: IO window: 0x4000-0x4fff [ 0.186674] pci 0000:00:02.0: MEM window: 0xb4000000-0xb5ffffff [ 0.186678] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff [ 0.186683] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 [ 0.186686] pci 0000:00:03.0: IO window: disabled [ 0.186689] pci 0000:00:03.0: MEM window: 0xb6000000-0xb7ffffff [ 0.186693] pci 0000:00:03.0: PREFETCH window: disabled [ 0.186696] pci 0000:00:10.0: PCI bridge, secondary bus 0000:07 [ 0.186698] pci 0000:00:10.0: IO window: disabled [ 0.186702] pci 0000:00:10.0: MEM window: disabled [ 0.186706] pci 0000:00:10.0: PREFETCH window: disabled [ 0.186716] pci 0000:00:02.0: setting latency timer to 64 [ 0.186722] pci 0000:00:03.0: setting latency timer to 64 [ 0.186728] pci 0000:00:10.0: setting latency timer to 64 [ 0.186733] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.186736] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.186739] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] [ 0.186742] pci_bus 0000:01: resource 1 mem: [0xb4000000-0xb5ffffff] [ 0.186745] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd01fffff] [ 0.186748] pci_bus 0000:03: resource 1 mem: [0xb6000000-0xb7ffffff] [ 0.186752] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 0.186755] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.186833] NET: Registered protocol family 2 [ 0.187031] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.188784] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.193475] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.194057] TCP: Hash tables configured (established 524288 bind 65536) [ 0.194061] TCP reno registered [ 0.194195] NET: Registered protocol family 1 [ 0.194270] Unpacking initramfs... [ 0.336511] Freeing initrd memory: 7064k freed [ 0.340338] Simple Boot Flag at 0x36 set to 0x1 [ 0.340590] Scanning for low memory corruption every 60 seconds [ 0.340788] audit: initializing netlink socket (disabled) [ 0.340804] type=2000 audit(1269462479.339:1): initialized [ 0.349429] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.349567] VFS: Disk quotas dquot_6.5.2 [ 0.349605] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.349763] msgmni has been set to 1947 [ 0.349873] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.349876] io scheduler noop registered [ 0.349878] io scheduler anticipatory registered [ 0.349881] io scheduler deadline registered [ 0.349899] io scheduler cfq registered (default) [ 0.350001] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.350007] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.350050] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.350078] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.350085] pci 0000:00:05.0: Boot video device [ 0.564027] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.564085] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.564146] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.564321] alloc irq_desc for 24 on node 0 [ 0.564323] alloc kstat_irqs on node 0 [ 0.564334] pcieport-driver 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.564340] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.564458] alloc irq_desc for 25 on node 0 [ 0.564461] alloc kstat_irqs on node 0 [ 0.564467] pcieport-driver 0000:00:03.0: irq 25 for MSI/MSI-X [ 0.564472] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 0.564557] pci-stub: invalid id string "" [ 0.564762] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001800000, using 3072k, total 65536k [ 0.564766] vesafb: mode is 1024x768x16, linelength=2048, pages=1 [ 0.564768] vesafb: scrolling: redraw [ 0.564771] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.564970] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.578891] bootsplash: silentjpeg size 91628 bytes [ 0.595005] bootsplash: ...found (1024x768, 50700 bytes, v3). [ 0.651276] Console: switching to colour frame buffer device 124x44 [ 0.703932] Switched to high resolution mode on CPU 0 [ 0.707309] fb0: VESA VGA frame buffer device [ 0.709126] Non-volatile memory driver v1.3 [ 0.709129] Linux agpgart interface v0.103 [ 0.709133] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.709640] Fixed MDIO Bus: probed [ 0.709648] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.710156] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 0.710162] alloc irq_desc for 22 on node 0 [ 0.710165] alloc kstat_irqs on node 0 [ 0.710177] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22 [ 0.710197] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 0.710200] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 0.710236] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 0.710280] ehci_hcd 0000:00:0b.1: debug port 1 [ 0.710285] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 0.710312] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xb0005000 [ 0.720010] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 0.720037] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.720040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.720043] usb usb1: Product: EHCI Host Controller [ 0.720046] usb usb1: Manufacturer: Linux 2.6.31.12-0.2-default ehci_hcd [ 0.720048] usb usb1: SerialNumber: 0000:00:0b.1 [ 0.720135] usb usb1: configuration #1 chosen from 1 choice [ 0.720169] hub 1-0:1.0: USB hub found [ 0.720178] hub 1-0:1.0: 8 ports detected [ 0.720283] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.720758] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 [ 0.720764] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22 [ 0.720784] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 0.720788] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 0.720799] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 0.720816] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000 [ 0.778022] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.778025] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.778028] usb usb2: Product: OHCI Host Controller [ 0.778030] usb usb2: Manufacturer: Linux 2.6.31.12-0.2-default ohci_hcd [ 0.778033] usb usb2: SerialNumber: 0000:00:0b.0 [ 0.778110] usb usb2: configuration #1 chosen from 1 choice [ 0.778139] hub 2-0:1.0: USB hub found [ 0.778150] hub 2-0:1.0: 8 ports detected [ 0.778237] uhci_hcd: USB Universal Host Controller Interface driver [ 0.778282] Initializing USB Mass Storage driver... [ 0.778306] usbcore: registered new interface driver usb-storage [ 0.778309] USB Mass Storage support registered. [ 0.778332] usbcore: registered new interface driver libusual [ 0.778344] usbcore: registered new interface driver ums-alauda [ 0.778357] usbcore: registered new interface driver ums-cypress [ 0.778369] usbcore: registered new interface driver ums-datafab [ 0.778381] usbcore: registered new interface driver ums-freecom [ 0.778393] usbcore: registered new interface driver ums-isd200 [ 0.778405] usbcore: registered new interface driver ums-jumpshot [ 0.778418] usbcore: registered new interface driver ums-karma [ 0.778430] usbcore: registered new interface driver ums-onetouch [ 0.778444] usbcore: registered new interface driver ums-sddr09 [ 0.778456] usbcore: registered new interface driver ums-sddr55 [ 0.778469] usbcore: registered new interface driver ums-usbat [ 0.778514] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.795995] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.796007] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.796075] mice: PS/2 mouse device common for all mice [ 0.797027] rtc_cmos 00:09: RTC can wake from S4 [ 0.797075] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 [ 0.797115] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.797127] cpuidle: using governor ladder [ 0.797129] cpuidle: using governor menu [ 0.797431] usbcore: registered new interface driver hiddev [ 0.797445] usbcore: registered new interface driver usbhid [ 0.797448] usbhid: v2.6:USB HID core driver [ 0.896752] TCP cubic registered [ 0.896817] NET: Registered protocol family 10 [ 0.897337] lo: Disabled Privacy Extensions [ 0.897734] lib80211: common routines for IEEE802.11 drivers [ 0.897737] lib80211_crypt: registered algorithm 'NULL' [ 0.897848] PM: Checking image partition /dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part6 [ 0.906378] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.706188] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 1.770340] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1 [ 1.774861] PM: Resume from disk failed. [ 1.774879] registered taskstats version 1 [ 1.775024] Magic number: 2:832:498 [ 1.775111] rtc_cmos 00:09: setting system clock to 2010-03-24 20:28:01 UTC (1269462481) [ 1.775192] Freeing unused kernel memory: 1024k freed [ 1.775675] Write protecting the kernel read-only data: 8920k [ 1.816300] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.816312] ACPI: Thermal Zone [THRM] (36 C) [ 1.820613] pata_amd 0000:00:0d.0: version 0.4.1 [ 1.820663] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 1.820746] scsi0 : pata_amd [ 1.820845] scsi1 : pata_amd [ 1.821746] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 [ 1.821749] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 [ 2.000311] ata1.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH16, max MWDMA2 [ 2.000339] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc700) ACPI=0x39f (120:600:0x12) [ 2.032257] ata1.00: configured for MWDMA2 [ 2.048895] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH16 PQ: 0 ANSI: 5 [ 2.049060] ata2: port disabled. ignoring. [ 2.055290] sata_nv 0000:00:0e.0: version 3.5 [ 2.055305] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007) [ 2.055734] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 2.055740] alloc irq_desc for 23 on node 0 [ 2.055742] alloc kstat_irqs on node 0 [ 2.055755] sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23 [ 2.055759] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 2.055826] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 2.055949] scsi2 : sata_nv [ 2.056056] scsi3 : sata_nv [ 2.056253] ata3: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 23 [ 2.056258] ata4: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 23 [ 2.524038] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.573244] ata3.00: ATA-8: WDC WD2500BEVS-22VAT0, 11.01A11, max UDMA/133 [ 2.573248] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.589005] ata3.00: configured for UDMA/133 [ 2.589116] scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 11.0 PQ: 0 ANSI: 5 [ 2.589294] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.589348] sd 2:0:0:0: [sda] Write Protect is off [ 2.589351] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.589379] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.589516] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4 [ 2.627363] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.910597] ata4: SATA link down (SStatus 0 SControl 300) [ 2.929767] Uniform Multi-Platform E-IDE driver [ 2.940062] processor LNXCPU:00: registered as cooling_device0 [ 2.953725] udev: starting version 146 [ 3.811463] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 3.811469] PM: Marking nosave pages: 000000000009d000 - 0000000000100000 [ 3.811473] PM: Marking nosave pages: 00000000abf00000 - 0000000100000000 [ 3.812922] PM: Marking nosave pages: 0000000020000000 - 0000000024000000 [ 3.813169] PM: Basic memory bitmaps created [ 3.841464] PM: Basic memory bitmaps freed [ 3.853209] PM: Starting manual resume from disk [ 3.853213] PM: Resume from partition 8:6 [ 3.853215] PM: Checking hibernation image. [ 3.853463] PM: Resume from disk failed. [ 4.082956] kjournald starting. Commit interval 15 seconds [ 4.083243] EXT3 FS on sda3, internal journal [ 4.083249] EXT3-fs: mounted filesystem with ordered data mode. [ 9.322651] udev: starting version 146 [ 9.537827] ACPI: WMI: Mapper loaded [ 9.652249] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 9.652286] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 9.658628] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 9.658680] ACPI: Power Button [PWRF] [ 9.658743] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 9.658774] ACPI: Power Button [PWRB] [ 9.658826] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 9.658858] ACPI: Sleep Button [SLPB] [ 9.658911] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 [ 9.667441] ACPI: Lid Switch [LID] [ 9.989101] ACPI: Battery Slot [BAT0] (battery present) [ 10.081264] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 10.252751] ACPI: AC Adapter [ACAD] (off-line) [ 10.256582] acpi device:24: registered as cooling_device1 [ 10.256754] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/input/input7 [ 10.256807] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 10.278592] EDAC MC: Ver: 2.1.0 Mar 17 2010 [ 11.479245] nvidia: module license 'NVIDIA' taints kernel. [ 11.479251] Disabling lock debugging due to kernel taint [ 11.735246] nvidia 0000:00:05.0: power state changed by ACPI to D0 [ 11.735671] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18 [ 11.735677] alloc irq_desc for 18 on node 0 [ 11.735680] alloc kstat_irqs on node 0 [ 11.735694] nvidia 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) -> IRQ 18 [ 11.735702] nvidia 0000:00:05.0: setting latency timer to 64 [ 11.736064] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.53 Wed Dec 9 15:29:46 PST 2009 [ 11.745279] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 11.745301] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 11.950528] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 11.951065] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 11.951071] alloc irq_desc for 20 on node 0 [ 11.951074] alloc kstat_irqs on node 0 [ 11.951087] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20 [ 11.951093] forcedeth 0000:00:14.0: setting latency timer to 64 [ 11.951161] nv_probe: set workaround bit for reversed mac addr [ 12.203421] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 12.203431] alloc irq_desc for 19 on node 0 [ 12.203434] alloc kstat_irqs on node 0 [ 12.203449] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, high) -> IRQ 19 [ 12.203458] b43-pci-bridge 0000:03:00.0: setting latency timer to 64 [ 12.222276] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 12.222283] Uniform CD-ROM driver Revision: 3.20 [ 12.222407] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 12.227771] EDAC amd64_edac: Ver: 3.2.0 Mar 17 2010 [ 12.262086] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 12.399863] cfg80211: Calling CRDA to update world regulatory domain [ 12.469728] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:46:32:75 [ 12.469733] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 [ 12.475567] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 12.479804] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 12.479809] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 12.479813] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 12.479815] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 12.479817] Might be a BIOS bug, if BIOS says ECC is enabled [ 12.479818] Use of the override can cause unknown side effects. [ 12.479841] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 12.480831] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 12.480838] alloc irq_desc for 21 on node 0 [ 12.480840] alloc kstat_irqs on node 0 [ 12.480854] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, high) -> IRQ 21 [ 12.480922] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 12.606573] b43-phy0: Broadcom 4311 WLAN found (core revision 10) [ 13.078693] phy0: Selected rate control algorithm 'minstrel' [ 13.079522] Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ] [ 13.324761] Adding 2104444k swap on /dev/sda6. Priority:-1 extents:1 across:2104444k [ 14.062527] device-mapper: uevent: version 1.0.3 [ 14.062934] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 15.060429] loop: module loaded [ 15.388591] fuse init (API version 7.12) [ 16.130588] kjournald starting. Commit interval 15 seconds [ 16.131139] EXT3 FS on sda5, internal journal [ 16.131145] EXT3-fs: mounted filesystem with ordered data mode. [ 16.218716] kjournald starting. Commit interval 15 seconds [ 16.219092] EXT3 FS on sda4, internal journal [ 16.219098] EXT3-fs: mounted filesystem with ordered data mode. [ 16.285334] kjournald starting. Commit interval 15 seconds [ 16.285685] EXT3 FS on sda7, internal journal [ 16.285690] EXT3-fs: mounted filesystem with ordered data mode. [ 19.079655] type=1505 audit(1269473298.800:2): operation="profile_load" pid=1073 name=/bin/ping [ 19.116202] type=1505 audit(1269473298.840:3): operation="profile_load" pid=1074 name=/sbin/klogd [ 19.188578] type=1505 audit(1269473298.912:4): operation="profile_load" pid=1075 name=/sbin/syslog-ng [ 19.261448] type=1505 audit(1269473298.984:5): operation="profile_load" pid=1076 name=/sbin/syslogd [ 19.338306] type=1505 audit(1269473299.060:6): operation="profile_load" pid=1077 name=/usr/sbin/avahi-daemon [ 19.403815] type=1505 audit(1269473299.124:7): operation="profile_load" pid=1078 name=/usr/sbin/identd [ 19.471943] type=1505 audit(1269473299.192:8): operation="profile_load" pid=1079 name=/usr/sbin/mdnsd [ 19.548382] type=1505 audit(1269473299.272:9): operation="profile_load" pid=1080 name=/usr/sbin/nscd [ 19.656877] type=1505 audit(1269473299.380:10): operation="profile_load" pid=1081 name=/usr/sbin/ntpd [ 19.719214] type=1505 audit(1269473299.440:11): operation="profile_load" pid=1082 name=/usr/sbin/traceroute [ 20.819337] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 21.126327] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.201488] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 32.899880] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MK-36 processors (1 cpu cores) (version 2.20.00) [ 32.899946] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe [ 32.899953] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10 [ 32.899960] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x12 [ 32.899967] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18 [ 33.000241] Marking TSC unstable due to cpufreq changes [ 33.500026] Clocksource tsc unstable (delta = -289817672 ns) [ 39.088344] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 47.278839] eth0: no link during initialization. [ 47.280892] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 47.332090] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 47.369963] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 47.413378] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 47.456700] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 47.600361] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 47.672493] Registered led device: b43-phy0::tx [ 47.672519] Registered led device: b43-phy0::rx [ 47.672543] Registered led device: b43-phy0::radio [ 47.685141] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 47.939175] NET: Registered protocol family 17 [ 112.718106] wlan0: authenticate with AP 00:1b:2f:e5:39:88 [ 112.723237] wlan0: authenticated [ 112.723250] wlan0: associate with AP 00:1b:2f:e5:39:88 [ 112.728644] wlan0: RX AssocResp from 00:1b:2f:e5:39:88 (capab=0x431 status=0 aid=1) [ 112.728656] wlan0: associated [ 112.731420] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 113.437578] Intel AES-NI instructions are not detected. [ 113.638499] padlock: VIA PadLock not detected. [ 123.248013] wlan0: no IPv6 routers present [ 127.162688] RPC: Registered udp transport module. [ 127.162701] RPC: Registered tcp transport module. [ 127.209216] Slow work thread pool: Starting up [ 127.209826] Slow work thread pool: Ready [ 127.209889] FS-Cache: Loaded [ 127.256931] FS-Cache: Netfs 'nfs' registered for caching [ 312.496038] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.2 DST=204.152.191.39 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=40656 DF PROTO=TCP SPT=36439 DPT=80 WINDOW=724 RES=0x00 ACK FIN URGP=0 OPT (0101080A00000C340311E2C2) [ 343.764067] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.2 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=54883 DF PROTO=TCP SPT=52505 DPT=80 WINDOW=266 RES=0x00 ACK FIN URGP=0 OPT (0101080A00002ABD141BB3A7)