Boa tarde a todos, estou com problemas em por a funcionar a minha placa wireless USB SMC modelo: SMCWUSB-G. Uso openSUSE 10.3 com Gnome, 100% actualizado. Com o kernel 2.6.22.17-0.1. Output do hwinfo: 10: USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices /usb_device_83a_4505_noserial_if0 Unique ID: R_O4.wkm1Arvlfj3 Parent ID: pBe4.9d3WZhzaYO3 SysFS ID: /devices/pci0000:00/0000:00:03.3/usb2/2-6/2-6:1.0 SysFS BusID: 2-6:1.0 Hardware Class: unknown Model: "Accton USB2.0 WLAN" Hotplug: USB Vendor: usb 0x083a "Accton" Device: usb 0x4505 "USB2.0 WLAN" Revision: "48.10" Speed: 480 Mbps Module Alias: "usb:v083Ap4505d4810dcFFdscFFdpFFicFFisc00ip00" Driver Info #0: Driver Status: zd1211rw is active Driver Activation Cmd: "modprobe zd1211rw" Config Status: cfg=3Dnew, avail=3Dyes, need=3Dno, active=3Dunknown Attached to: #6 (Hub) Aguardo uma resposta, obrigado. -- Rui Manuel Martins --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-pt+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-pt+help@opensuse.org
Olá,
aparentemente esta placa funciona através do ndiswrapper, onde você
terá que usar os drivers dela feitos para o windows.... Mais
informações você pode encontrar nos seguintes fóruns:
http://www.susebr.org/forum/
http://www.susept.com/forum/
onde você encontrará vários tópicos sobre o ndiswrapper, talvez não
para a sua placa específica mas o procedimento mostrado é o mesmo...
abraços
Luiz Fernando Ranghetti
2008/4/12, Rui Martins
Boa tarde a todos, estou com problemas em por a funcionar a minha placa wireless USB SMC modelo: SMCWUSB-G.
Uso openSUSE 10.3 com Gnome, 100% actualizado. Com o kernel 2.6.22.17-0.1.
Output do hwinfo: 10: USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices /usb_device_83a_4505_noserial_if0 Unique ID: R_O4.wkm1Arvlfj3 Parent ID: pBe4.9d3WZhzaYO3 SysFS ID: /devices/pci0000:00/0000:00:03.3/usb2/2-6/2-6:1.0 SysFS BusID: 2-6:1.0 Hardware Class: unknown Model: "Accton USB2.0 WLAN" Hotplug: USB Vendor: usb 0x083a "Accton" Device: usb 0x4505 "USB2.0 WLAN" Revision: "48.10" Speed: 480 Mbps Module Alias: "usb:v083Ap4505d4810dcFFdscFFdpFFicFFisc00ip00" Driver Info #0: Driver Status: zd1211rw is active Driver Activation Cmd: "modprobe zd1211rw" Config Status: cfg=3Dnew, avail=3Dyes, need=3Dno, active=3Dunknown Attached to: #6 (Hub)
Aguardo uma resposta, obrigado.
-- Rui Manuel Martins --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-pt+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-pt+help@opensuse.org
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-pt+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-pt+help@opensuse.org
participants (2)
-
Rui Martins -
¡ElCheVive!