[opensuse-es] Nueva e interesante interfaz yast2-gtk para manejo de software en Factory
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 [Diferido] Hola, Pues eso, que han anunciado una nueva y muy interesante versión de la interfaz de gestión de software en yast, y piden que se pruebe. Los cambios son realmente interesantes, la hacen mejor que la interfaz QT (si funciona, claro, no he podido probarla todavía). (Nota: la M5 para x64 no se puede instalar, usad i586; detalles en el anuncio oficial nº 2 ) - -------- Original Message -------- Subject: [opensuse-gnome] GTK interface of software installer in YaST [yast2-gtk] in Factory Date: Wed, 14 Apr 2010 19:48:07 +0530 From: Atri Bhattacharya <> To: opensuse-gnome@opensuse.org Dear milestone testers! openSUSE 11.3 looks to be getting in good shape, and there are about two months to go [1] before the first of the RC releases and three until the final release. There are numerous things to be excited about with 11.3 as has been the case with every prior release. One of these is definitely the gtk interface to YaST Sotware Management module [2,3], much revamped since 11.2. It would be very nice of you to test this thoroughly for bugs, but also for usability issues and suggest improvements and peeves :) here and over at bugzilla [4]. In the following I would like to run you through some of the more notable changes in the interface. Please note that there is enough time yet to make minor modifications in the design if required. 1. Main interface revamp: The package-list shown by default is now categorised by (Packagekit) groups and further separation into "Available", "Upgrades" and "Installed" tabs has been done away with. Instead this has been implemented as a separate "Status" filter (below the Category box). By default this filter is set to "Any Status". Selecting the "Upgradeable" filter here for example shows all those packages which have upgrades from the subscribed repositories and brings out an "Upgrade all" button just below the package list. The package-list can now show various columns like repositories, etc. The columns shown by default are Tick-action, package-name, and package-version. Selecting a package for installation is now much easier. For packages that are not installed, check the tick-box to the left of the package-name in the main list and it is selected for installation. Installed packages are already ticked, you have to un-check it to have the package removed. The upgrade button appears just beside the version column for every package that has an update candidate. For such packages both the installed and latest available versions are shown in the version column. When one selects a package for installation/update/removal it brings up a summary line in the status bar along with an Undo button (that undoes this installation/removal request alone) and a link to a "Summary of changes" box [see point 2]. There is a menu-bar at top that largely mirrors the menu-bar in the qt version. 2. A "Summary of changes" box: that contains all the packages selected during the session for installation/update/removal alongwith Undo buttons for the manually selected packages. Selecting "undo" also applies the changes to the corresponding dependencies pulled in automatically by the dep-solver. This replaces the list of changes sidebar implementation which was a part of the package-manager in its 11.2 and previous avatars. Also with a button to access the "History" viewer [see point 3]. 3. A "History of changes" box: that is accessible from either the top-menu "Extras" or from the "Summary of changes" box. This shows the entire history of installed/upgraded/uninstalled packages, and subscribed/removed repositories, categorised conveniently by date (the full history-viewer in all its glory has not made it into M5, it should be in factory [5] soon however and you can already try it from svn [2] if feeling adventurous :) ). You can select a package and hit the "jump-to" button to switch to the package in the main interface and uninstall/re-install a removed package from there. This is in response to feature # 305859. It enables the user to look up a package installed, say, recently that he/she does not like or finds unuseable and remove it and the dependencies it pulled in easily. This should go extremely well if the Unneeded packages group is implemented later [6]. 4. When one switches to the "Repository" categorisation (left-sidebar, select Repositories from drop-down header), the button "Switch all packages to that from this repository" shows up just below the main interface. All the development work thanks to the yast2-gtk maintainers. Discussions pertaining to all points have been taking place at http://groups.google.com/group/yast2-gtk. There is enough time yet for your suggestions regarding the design and usability of yast2-gtk to be given thorough consideration for implementation. Please do use it and let us know what you think of it and the changes you would like to see to make yast2-gtk more useable. You may reply to this mail for general feedback and/or put in a bugzilla report if you meet a crash, etc. Better still you may subscribe to the above google-group and post your suggestions there. Happy testing! Bye -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iF4EAREIAAYFAkvGvfAACgkQja8UbcUWM1wTcAD9HyLlJAfw/E0Dkx5GKSANaC9s fLf5r0xJ0HXTeNro2AcA+wRYwqixARoREF7gCRrx9tCAiYPKuPkoZkhVE2lM/D+3 =oCR4 -----END PGP SIGNATURE----- -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
Soy novato, no informático, por favor, cómo se prueba si uno quisiera acceder a ello? José Gabriel -----Mensaje original----- De: Carlos Robinson [mailto:robin.listas@gmail.com] En nombre de Carlos E. R. Enviado el: Jueves, 15 de Abril de 2010 01:19 a.m. Para: oS-es Asunto: [opensuse-es] Nueva e interesante interfaz yast2-gtk para manejo de software en Factory -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 [Diferido] Hola, Pues eso, que han anunciado una nueva y muy interesante versión de la interfaz de gestión de software en yast, y piden que se pruebe. Los cambios son realmente interesantes, la hacen mejor que la interfaz QT (si funciona, claro, no he podido probarla todavía). (Nota: la M5 para x64 no se puede instalar, usad i586; detalles en el anuncio oficial nº 2 ) Este mensaje de correo electrónico, incluidos los archivos adjuntos, es para el uso exclusivo de la persona a la que se ha enviado, y puede contener información que sea confidencial o protegida legalmente. Si usted no es el destinatario, o ha recibido este mensaje por error, no está autorizado a copiar, distribuir, o utilizar de alguna manera este mensaje. Por favor notifique inmediatamente al remitente por correo electrónico y suprimir permanentemente este mensaje y los archivos adjuntos. No se otorga ninguna garantía de que este e-mail esté libre de errores o virus. INSTITUTO COSTARRICENSE DE ELECTRICIDAD
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2010-04-15 23:53, Sánchez Jiménez José Gabriel wrote:
Soy novato, no informático, por favor, cómo se prueba si uno quisiera acceder a ello?
No te lo recomiendo. La versión factory no es para novatos, debes saber lo que estás haciendo y ser capaz de resolver (algunos) problemas por tus medios y reportarlos arriba. - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" GM (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iF4EAREIAAYFAkvHjQEACgkQja8UbcUWM1yjwAEAl/+rhVGPXC2ukix1wD1apByV hX12RwqBX2tyhBMuw/cA/0QpHneYyzfTrQx6d7oPX69ZLYcJkS+/a7ufpT4wB+8h =HerJ -----END PGP SIGNATURE----- -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2010-04-15 23:53, Sánchez Jiménez José Gabriel wrote: No te lo recomiendo. La versión factory no es para novatos, debes saber lo que estás haciendo y ser capaz de resolver (algunos) problemas por tus medios y reportarlos arriba. - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" GM (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iF4EAREIAAYFAkvHjPcACgkQja8UbcUWM1xFuwD9G7bcD/wh7nmM6IND1CjdR203 ZlUVIMrCbgZzwTOiwhEBAIPojpuo/GtiX9AkTvhSBwq8cC9gnpXckmRqEaHouSsd =BaVC -----END PGP SIGNATURE----- -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
El Thu, 15 Apr 2010 15:53:53 -0600, Sánchez Jiménez José Gabriel escribió:
Soy novato, no informático, por favor, cómo se prueba si uno quisiera acceder a ello?
La mejor forma de probarlo es usando la versión LiveCD. 1/ Descargas la imagen ISO y la grabas en un CD para después iniciar el sistema desde el CD. 2/ O si tienes una máquina virtual, la cargas desde ahí, sin necesidad de grabar un CD. No he probado la ML5, espero que los cambios también los hayan incorporado en la versión LiveCD. Enlace de descarga directo: http://ftp.novell.hu/pub/mirrors/ftp.opensuse.org/opensuse/distribution/11.3... Saludos, -- Camaleón -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
El Fri, 16 Apr 2010 06:38:09 +0000, Camaleón escribió: (...)
No he probado la ML5, espero que los cambios también los hayan incorporado en la versión LiveCD.
Ayer la cargué desde la LiveCD (desde la VM no cargaba) y sí lo incluye (aunque YaST2 casca de vez en cuando) :-) Bueno, parece que se están poniendo las pilas con el administrador de paquetes para GNOME, ahora se le ve más... ¿coherente?. La verdad es que no recuerdo mucho cómo era el anterior (apenas lo probé en las Milestone de la 11.2, y antes usaba kde por lo que siempre veía la interfaz Qt o la ncurses) pero yo diría, si la memoria no me falla, que han añadido un menú superior de acción, y le han dado una estructura más lógica a la parte inferior (donde se van las opciones y características de los paquetes), le han quitado la botonera gigante que tenía (disponibles, actualizaciones, instalados), he visto un botoncito que ponía "redo" (¿o era "undo"? :-?) (deshacer), han vuelto los grupos de paquetes y bueno, a simple vista (5 minutos apenas :-P) me ha gustado. Saludos, -- Camaleón -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 2010-04-18 12:44, Camaleón wrote:
El Fri, 16 Apr 2010 06:38:09 +0000, Camaleón escribió:
(...)
No he probado la ML5, espero que los cambios también los hayan incorporado en la versión LiveCD.
Ayer la cargué desde la LiveCD (desde la VM no cargaba) y sí lo incluye (aunque YaST2 casca de vez en cuando) :-)
Bueno, parece que se están poniendo las pilas con el administrador de paquetes para GNOME, ahora se le ve más... ¿coherente?.
Está bastante mejor. Tiene un menú extra donde hay cosas como histórico de cambios, donde puedes ver cada día que es lo que instalaste. Tiene un undo que permite al menos deshacer los cambios de la sesión, ignoro si funciona en la siguiente sesión. En teoría debería poder desinstalar un paquete y las dependencias que trajo, pero hay una funcionalidad de limpieza de dependencias ya no necesarias que todavía no está hecha. Aún y todo me cuesta aclararme para conseguir hacer las cosas con él, o porque no estoy acostumbrado o porque le faltan cosas. De todos modos la M5 tiene bastantes bugs de los que me hacen no poder usarla bastante. Han vuelto a romper la hibernación. Yo creo que ni la han probado. - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" GM (Elessar)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAkvK7ToACgkQU92UU+smfQVGzACgk9XQ/nkvqY/am4U/6gvN2wAK w9wAmwXvGc+cmdZPvLhKRTDMarXJuvUB =WSsC -----END PGP SIGNATURE----- -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
participants (4)
-
Camaleón
-
Carlos E. R.
-
Carlos E. R.
-
Sánchez Jiménez José Gabriel