Hola! Me acabo de suscribir a la lista a ver si alguien me puede ayudar. Despues de instalar suse 9.0 en dual pentium 300 este arranca con problemas. A veces arranca a la primera, a veces a la 3, otras a la 7.... se resetea solo justo despues de salir el grub. Adjunto el registro de sistema, si se necesita algo mas decidmelo... (Lo siento, el primer mensaje y es un tocho impresionante...) Inspecting /boot/System.map-2.4.21-144-smp4G Loaded 21746 symbols from /boot/System.map-2.4.21-144-smp4G. Symbols match kernel version 2.4.21. Loaded 381 symbols from 5 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.21-144-smp4G (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 SMP Fri Nov 14 00:07:01 UTC 2003 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000000fffd000 (usable) <4> BIOS-e820: 000000000fffd000 - 000000000ffff000 (ACPI data) <4> BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <5>756MB vmalloc/ioremap area available. <5>0MB HIGHMEM available. <5>255MB LOWMEM available. <7>ACPI: have wakeup address 0xc0002000 <4>found SMP MP-table at 000f6eb0 <4>hm, page 000f6000 reserved twice. <4>hm, page 000f7000 reserved twice. <4>hm, page 000f6000 reserved twice. <4>hm, page 000f7000 reserved twice. <4>On node 0 totalpages: 65533 <4>zone(0): 4096 pages. <4>zone(1): 61437 pages. <4>zone(2): 0 pages. <4>Intel MultiProcessor Specification v1.1 <4> Virtual Wire compatibility mode. <4>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 <4>Processor #0 Pentium(tm) Pro APIC version 17 <4>Processor #1 Pentium(tm) Pro APIC version 17 <4>I/O APIC #2 Version 17 at 0xFEC00000. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <4>Processors: 2 <4>Building zonelist for node : 0 <4>Kernel command line: root=/dev/sda1 vga=0x314 acpi=off desktop splash=silent <6>bootsplash: silent mode. <6>Initializing CPU#0 <4>Detected 300.714 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 591.87 BogoMIPS <6>Memory: 252340k/262132k available (1867k kernel code, 7232k reserved, 638k data, 188k init, 0k highmem) <6>Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) <6>Inode cache hash table entries: 16384 (order: 5, 131072 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) <4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 512K <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 0080fbff 00000000 00000000 00000000 <7>CPU: Common caps: 0080fbff 00000000 00000000 00000000 <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 512K <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 0080fbff 00000000 00000000 00000000 <7>CPU: Common caps: 0080fbff 00000000 00000000 00000000 <4>CPU0: Intel Pentium II (Klamath) stepping 03 <4>per-CPU timeslice cutoff: 1463.01 usecs. <4>task migration cache decay timeout: 2 msecs. <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Booting processor 1/1 eip 3000 <6>Initializing CPU#1 <4>masked ExtINT on CPU#1 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 600.06 BogoMIPS <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 512K <6>Intel machine check reporting enabled on CPU#1. <7>CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 <7>CPU: Common caps: 0080fbff 00000000 00000000 00000000 <4>CPU1: Intel Pentium II (Deschutes) stepping 02 <6>Total of 2 processors activated (1191.93 BogoMIPS). <4>ENABLING IO-APIC IRQs <4>Setting 2 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 2 ... ok. <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-13, 2-18, 2-20, 2-21, 2-22, 2-23 not connected. <6>..TIMER: vector=0x31 pin1=2 pin2=0 <7>number of MP IRQ sources: 15. <7>number of IO-APIC #2 registers: 24. <6>testing the IO APIC....................... <4> <7>IO APIC #2...... <7>.... register #00: 02000000 <7>....... : physical APIC id: 02 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00170011 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 0 <7>....... : IO APIC version: 0011 <7>.... register #02: 00000000 <7>....... : arbitration: 00 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00 <7> 01 003 03 0 0 0 0 0 1 1 39 <7> 02 003 03 0 0 0 0 0 1 1 31 <7> 03 003 03 0 0 0 0 0 1 1 41 <7> 04 003 03 0 0 0 0 0 1 1 49 <7> 05 000 00 1 0 0 0 0 0 0 00 <7> 06 003 03 0 0 0 0 0 1 1 51 <7> 07 003 03 0 0 0 0 0 1 1 59 <7> 08 003 03 0 0 0 0 0 1 1 61 <7> 09 003 03 0 0 0 0 0 1 1 69 <7> 0a 000 00 1 0 0 0 0 0 0 00 <7> 0b 000 00 1 0 0 0 0 0 0 00 <7> 0c 003 03 0 0 0 0 0 1 1 71 <7> 0d 000 00 1 0 0 0 0 0 0 00 <7> 0e 003 03 0 0 0 0 0 1 1 79 <7> 0f 003 03 0 0 0 0 0 1 1 81 <7> 10 003 03 1 1 0 1 0 1 1 89 <7> 11 003 03 1 1 0 1 0 1 1 91 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 003 03 1 1 0 1 0 1 1 99 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <7>IRQ to pin mappings: <7>IRQ0 -> 0:2 <7>IRQ1 -> 0:1 <7>IRQ3 -> 0:3 <7>IRQ4 -> 0:4 <7>IRQ5 -> 0:19 <7>IRQ6 -> 0:6 <7>IRQ7 -> 0:7 <7>IRQ8 -> 0:8 <7>IRQ9 -> 0:9 <7>IRQ10 -> 0:17 <7>IRQ11 -> 0:16 <7>IRQ12 -> 0:12 <7>IRQ14 -> 0:14 <7>IRQ15 -> 0:15 <6>.................................... done. <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 300.0632 MHz. <4>..... host bus clock speed is 66.0807 MHz. <4>cpu: 0, clocks: 66807, slice: 22269 <4>CPU0T0:66800,T1:44528,D:3,S:22269,C:66807 <4>cpu: 1, clocks: 66807, slice: 22269 <4>CPU1T0:66800,T1:22256,D:6,S:22269,C:66807 <4>checking TSC synchronization across CPUs: passed. <4>migration_task 0 on cpu=0 <4>migration_task 1 on cpu=1 <6>ACPI: Subsystem revision 20030619 <6>ACPI: Disabled via command line (acpi=off) <6>PCI: PCI BIOS revision 2.10 entry at 0xf0730, last bus=1 <6>PCI: Using configuration type 1 <6>PCI: Probing PCI hardware <4>PCI: Probing PCI hardware (bus 00) <6>PCI: Using IRQ router PIIX [8086/7110] at 00:04.0 <6>Limiting direct PCI/PCI transfers. <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16) <5>apm: disabled - APM is not SMP safe. <4>Starting kswapd <4>bigpage subsystem: allocated 0 bigpages (=0MB). <4>kinoded started <5>VFS: Disk quotas vdquot_6.5.1 <5>aio_setup: num_physpages = 16383 <5>aio_setup: sizeof(struct page) = 48 <6>vesafb: framebuffer at 0xd8000000, mapped to 0xd0810000, size 8192k <6>vesafb: mode is 800x600x16, linelength=1600, pages=7 <6>vesafb: protected mode interface info at c000:7c18 <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 16664 bytes, found (800x600, 8118 bytes, v3). <6>bootsplash: silent jpeg found. <6>bootsplash: silent jpeg found. <4>Console: switching to colour frame buffer device 92x29 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 16 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>PIIX4: IDE controller at PCI slot 00:04.1 <6>PIIX4: chipset revision 1 <6>PIIX4: not 100%% native mode: will probe irqs later <6> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio <4>hda: CRD-8483B, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>ide-floppy driver 0.99.newide <6>ide-floppy driver 0.99.newide <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 2048 buckets, 16Kbytes <6>TCP: Hash tables configured (established 16384 bind 16384) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <6>cryptoapi: loaded <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 430k freed <4>VFS: Mounted root (ext2 filesystem). <6>SCSI subsystem driver Revision: 1.00 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <7>PCI: Setting latency timer of device 00:06.0 to 64 <6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <4> <Adaptec aic7880 Ultra SCSI adapter> <4> aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs <4> <4>blk: queue cfd1d018, I/O limit 4095Mb (mask 0xffffffff) <4>(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15) <4> Vendor: YAMAHA Model: CRW6416S Rev: 1.0b <4> Type: CD-ROM ANSI SCSI revision: 02 <4>blk: queue cfd0ce18, I/O limit 4095Mb (mask 0xffffffff) <4>(scsi0:A:6): 20.000MB/s transfers (10.000MHz, offset 8, 16bit) <4> Vendor: QUANTUM Model: VIKING 4.5 WSE Rev: 8808 <4> Type: Direct-Access ANSI SCSI revision: 02 <4>blk: queue cfd0cc18, I/O limit 4095Mb (mask 0xffffffff) <4>scsi0:A:6:0: Tagged Queuing enabled. Depth 32 <4>Attached scsi disk sda at scsi0, channel 0, id 6, lun 0 <4>SCSI device sda: 8899737 512-byte hdwr sectors (4557 MB) <6>Partition check: <6> sda: sda1 sda2 <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device sd(8,1)) ... <4>for (sd(8,1)) <4>Using r5 hash to sort names <4>VFS: Mounted root (reiserfs filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <5>Trying to free ramdisk memory ... okay <6>Freeing unused kernel memory: 188k freed <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <4>reiserfs: enabling write barrier flush mode <6>lvm-mp: allocating 42 lowmem entries at c18df000 <6>LVM version 1.0.5+(mp-v6c)(22/07/2002) module loaded <4>reiserfs: enabling write barrier flush mode <6>Adding Swap: 345388k swap-space (priority 42) <4>reiserfs: enabling write barrier flush mode <4>reiserfs: enabling write barrier flush mode Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Thu Dec 4 13:00:09 2003 <notice>run boot scripts (setserial boot.proc) Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports done<notice>exit status of (setserial boot.proc) is (0 0) <notice>run boot scripts (boot.md) <notice>exit status of (boot.md) is (0) <notice>run boot scripts (boot.lvm) Run file system check on root for LVM activation fsck 1.34 (25-Jul-2003) Reiserfs super block in block 16 on 0x801 of format 3.6 with standard journal Blocks (total/free): 1024135/638721 by 4096 bytes Filesystem is clean Filesystem seems mounted read-only. Skipping journal replay. Checking internal tree..finished doneRemounting root file system (/) read/write for vgscan... Scanning for LVM volume groups... vgscan -- reading all physical volumes (this may take a while...) vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group Activating LVM volume groups... vgchange -- no volume groups found done <notice>exit status of (boot.lvm) is (0) <notice>run boot scripts (boot.localfs) Activating swap-devices in /etc/fstab... doneChecking file systems... fsck 1.34 (25-Jul-2003) Reiserfs super block in block 16 on 0x801 of format 3.6 with standard journal Blocks (total/free): 1024135/638721 by 4096 bytes Filesystem is clean Filesystem seems mounted read-only. Skipping journal replay. Checking internal tree..finished doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) nothing was mounted done<notice>exit status of (boot.localfs) is (0) <notice>run boot scripts (boot.crypto) <notice>exit status of (boot.crypto) is (0) <notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) Loading required kernel modules doneActivating remaining swap-devices in /etc/fstab... doneMounting shared memory FS on /dev/shmdone Restore device permissionsdone <notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0) <notice>run boot scripts (boot.idedma boot.clock) Setting up the CMOS clockdone <notice>exit status of (boot.idedma boot.clock) is (0 0) <notice>run boot scripts (boot.ldconfig) Setting up timezone datadone <notice>exit status of (boot.ldconfig) is (0) <notice>run boot scripts (boot.sched boot.localnet boot.isapnp) Setting scheduling timeslices unused Setting up hostname 'naboo'done Setting up loopback interface done <notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0) <notice>run boot scripts (boot.klog boot.ipconfig) Enabling syn flood protectiondone Disabling IP forwardingdone Creating /var/log/boot.msg done<notice>killproc: kill(36,29) <notice>exit status of (boot.klog boot.ipconfig) is (0 0) System Boot Control: The system has been setup Skipped features: boot.sched System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(36,3) Boot logging started on /dev/tty1(/dev/console) at Thu Dec 4 13:00:27 2003 Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>start services (random isdn) Initializing random number generatordone <notice>exit status of (random isdn) is (0 0) <notice>start services (network) Setting up network interfaces: lo done eth0 IP/Netmask: 172.26.0.2 / 255.255.255.240 done eth1 IP/Netmask: 172.26.0.3 / 255.255.255.240 /etc/sysconfig/network/scripts/ifup-route: line 160: route-stack-number: No such file or directory done <notice>exit status of (network) is (0) <notice>start services (syslog) Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/sbin/syslogd ] ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ syslogd: /var/log/news/news.crit: No such file or directory ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ syslogd: /var/log/news/news.err: No such file or directory ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ syslogd: /var/log/news/news.notice: No such file or directory <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/sbin/klogd ] done <notice>exit status of (syslog) is (0) <notice>start services (hotplug) Starting hotplugging services [ ieee1394 net pci usb ]failed <notice>exit status of (hotplug) is (1) <notice>start services (resmgr) Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=21 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/sbin/resmgrd ] done <notice>exit status of (resmgr) is (0) <notice>start services (splash_early portmap nmb) <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/sbin/portmap ] Starting RPC portmap daemondone Starting Samba classic NMB daemon <notice>startproc: execve (/usr/lib/samba/classic/nmbd) [ /usr/lib/samba/classic/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/lib/samba/classic/nmbd ] done <notice>exit status of (splash_early portmap nmb) is (0 0 0) <notice>start services (smbfs) Mount SMB File System unused <notice>exit status of (smbfs) is (6) <notice>start services (xntpd sshd fbset alsasound acpid) <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] ACPID: No ACPI support in kernelskipped Starting SSH daemondone Starting sound driverdone Starting network time protocol daemon (NTPD)<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -U ntp -T /var/lib/ntp ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ] done <notice>exit status of (xntpd sshd fbset alsasound acpid) is (0 0 0 0 5) <notice>start services (splash postfix kbd cups) <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=31 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] Starting cupsddone Starting mail service (Postfix)done Loading keymap qwerty/es.map.gz doneLoading compose table latin1.adddone Stop Unicode mode doneLoading console font lat9w-16.psfu -m trivial (B done<notice>exit status of (splash postfix kbd cups) is (0 0 0 0) <notice>start services (xinetd smb nscd hwscan cron) <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=35 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting hardware scan on bootStarting CRON daemondone <notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=35 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ] <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=35 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting INET services. (xinetd)done Starting Name Service Cache Daemondone Samba SMB: Waiting for cupsd to get ready<notice>startproc: execve (/usr/lib/samba/classic/smbd) [ /usr/lib/samba/classic/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh TMPDIR=/var/tmp progress=35 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/lib/samba/classic/smbd ] (29s) (28s) (27s) (26s) (25s) (24s) (23s) (22s) (21s) (20s) (19s) done Starting Samba classic SMB daemon done <notice>exit status of (xinetd smb nscd hwscan cron) is (0 0 0 0 0) <notice>start services (xdm splash_late) Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=40 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x314 RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=es_ES@euro PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=es_ES@euro splash=silent sscripts=41 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done <notice>exit status of (xdm splash_late) is (0 0) Master Resource Control: runlevel 5 has been reached Failed services in runlevel 5: hotplug Skipped services in runlevel 5: smbfs acpid <notice>killproc: kill(664,3)
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 El Jueves, 4 de Diciembre de 2003 15:59, Ivan escribió:
Hola!
Me acabo de suscribir a la lista a ver si alguien me puede ayudar. Despues de instalar suse 9.0 en dual pentium 300 este arranca con problemas.
A veces arranca a la primera, a veces a la 3, otras a la 7.... se resetea solo justo despues de salir el grub.
* Pasale a grub la opcion acpi=off si te deja de dar problemas, colocalo en el fichero /boot/grub/menu.lst , en la linea de opciones del arranque por defecto, fijate en la linea del arranque failsafe para ver otras opciones. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (GNU/Linux) iD4DBQE/z1VMAXFL65CppEIRAqsPAJdBaWcpxaG67QQ6fXP3yjitkjEpAJ9/nNNX qdgMmoPo5UTMlwyIib++2g== =1Avr -----END PGP SIGNATURE-----
Primero de todo gracias por tu pronta respuesta.
He estado probando y la unica forma con la q no ha arrancado el pc es con la
opcion acpi=off :-(
Pero he probado la de apm=off y siempre ha arrancado (apm=off acpi=off tb
funciona)
Y buscando por la red, me he encontrado con esto, a ver q me podeis decir: "
do NOT enable APM! APM and SMP are not compatible, and your system will
almost certainly (or at least probably ;)) crash under boot if APM is
enabled (Jakob Oestergaard). Alan Cox confirms this : 2.1.x turns APM off
for SMP boxes. Basically APM is undefined in the presence of SMP systems,
and anything could occur. "
sacado de esta pagina
http://www.phy.duke.edu/~rgb/Beowulf/smp-faq/prive/mentre/smp-faq/smp-faq-3....
Esta desfasado? Es cierto? Cierto en algunos casos? La placa base es una
Asus P2L97-DS, y por lo q he podido encontrar por internet funciona bien
bajo linux.
Ivan Jimenez.
----- Original Message -----
From: "jose maria"
Hola!
Me acabo de suscribir a la lista a ver si alguien me puede ayudar. Despues de instalar suse 9.0 en dual pentium 300 este arranca con problemas.
A veces arranca a la primera, a veces a la 3, otras a la 7.... se resetea solo justo despues de salir el grub.
* Pasale a grub la opcion acpi=off si te deja de dar problemas, colocalo en el fichero /boot/grub/menu.lst , en la linea de opciones del arranque por defecto, fijate en la linea del arranque failsafe para ver otras opciones. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (GNU/Linux) iD4DBQE/z1VMAXFL65CppEIRAqsPAJdBaWcpxaG67QQ6fXP3yjitkjEpAJ9/nNNX qdgMmoPo5UTMlwyIib++2g== =1Avr -----END PGP SIGNATURE----- -- Para dar de baja la suscripción, mande un mensaje a: suse-linux-s-unsubscribe@suse.com Para obtener el resto de direcciones-comando, mande un mensaje a: suse-linux-s-help@suse.com
El 2003-12-04 a las 23:02 +0100, Ivan escribió:
Pero he probado la de apm=off y siempre ha arrancado (apm=off acpi=off tb funciona)
Y buscando por la red, me he encontrado con esto, a ver q me podeis decir: " do NOT enable APM! APM and SMP are not compatible, and your system will
Si, eso es cierto, y debería habertelo puesto automaticamente. Lo que puede pasar entonces es que no puedas apagarlo, y tienes que poner otra opción de arranque. -- Saludos Carlos Robinson
participants (3)
-
Carlos E. R.
-
Ivan
-
jose maria