[opensuse-es] Como se hace para ver los logs de otra partición de sistema?

newer
[opensuse-es] Instalacion driver...

Juan Erbes

12 Mar 2017 12 Mar '17

12:48

Sigo renegando con la instalación del driver amdgpu-pro. Ayer siguiendo los pasos indicados en: https://community.amd.com/thread/212558 Conseguí que se compile y se instale, pero me sigue quedando la pantalla en negro. En la particion sda1 tengo Leap 42.1 y en la sdb1 Leap 42.2, que es donde intento instalar el driver amdgpu-pro. Ayer, como en la Leap 42.2 tenía 3 versiones de kernel, podía arrancar usando las versiones mas viejas de kernel, en las que no había intentado instalar amdgpu-pro, y con las que cargaba el driver de codigo abierto amdgpu. Pero decidí probar con un kernel mas nuevo el 4.4.52-7, donde el driver amdgpu-pro se instaló de forma automática, y al instalar esta versión de kernel, solamente me dejó instalada una sola versión anterior, la que ya tenía instalado el mismo driver, por lo que por mas que setee el sistema para arrancar en modo consola, no puiedo ver nada, y para colmo desde el otro sistema, tampoco puedo ver los logs. Con versiones mas viejas, uno podía acceder a las otras consolas, ver los logs desde otra versión de sistema, pero cada vez se está pareciendo mas a windows, donde lo que sea consola casi no existe, y al menor problema, hay que reinstalar el sistema (que me parece que va a ser la solución). Tampoco puedo cambiar de consola, con "Alt + Fx" (x=1-2-3-4-5), porque la pantalla sigue en negro. Debería funcionar, al menos esta vez la tarjeta de video que tengo figura entre las soportadas, pero probablemente quedó algo mal del intento anterior con la otra tarjeta que no estaba soportada. https://forums.opensuse.org/showthread.php/519730-Installation-of-AMDGPU-PRO... Desde ya muchas gracias! Saludos, Juan -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/ -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org

Show replies by date

Carlos E. R.

12 Mar 12 Mar

19:13

On 2017-03-12 13:48, Juan Erbes wrote:

...

mas que setee el sistema para arrancar en modo consola, no puiedo ver nada, y para colmo desde el otro sistema, tampoco puedo ver los logs.

Si están, están en /var/log/journal/, en formato binario, y tienes que usar journalctl -D directory para decirle donde están en el /mnt y leerlos. O bien, instalas un syslog y tienes logs tradicionales. Es lo que yo hago. -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" (Minas Tirith))

Juan Erbes

23:38

El día 12 de marzo de 2017, 16:13, Carlos E. R. escribió:

...

On 2017-03-12 13:48, Juan Erbes wrote:

...
mas que setee el sistema para arrancar en modo consola, no puiedo ver nada, y para colmo desde el otro sistema, tampoco puedo ver los logs.

Si están, están en /var/log/journal/, en formato binario, y tienes que usar journalctl -D directory para decirle donde están en el /mnt y leerlos.

O bien, instalas un syslog y tienes logs tradicionales. Es lo que yo hago.

Gracias! -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/ -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org

Juan Erbes

13 Mar 13 Mar

00:00

El día 12 de marzo de 2017, 16:13, Carlos E. R. escribió:

...

On 2017-03-12 13:48, Juan Erbes wrote:

...
mas que setee el sistema para arrancar en modo consola, no puiedo ver nada, y para colmo desde el otro sistema, tampoco puedo ver los logs.

Si están, están en /var/log/journal/, en formato binario, y tienes que usar journalctl -D directory para decirle donde están en el /mnt y leerlos.

O bien, instalas un syslog y tienes logs tradicionales. Es lo que yo hago.

Monte la otra partición en /mnt y al ejecutar: journalctl -D /mnt/var/log No journal files were found. /mnt/var/log # ls -l total 0 -rw------- 1 root utmp 0 feb 5 09:54 btmp -rw-rw-r-- 1 root utmp 0 feb 5 09:54 wtmp Si existiera algun archivo, por mas que sea binario, debería tener un tamaño x, pero ni siquiera parece la carpeta journal, mientras que en el sistema activo, si aparece /var/log/journal, pero en el otro que he montado, ni siquiera aparece la carpeta journal. Parece que no va a quedar otra que reinstalar, al mejor estilo windows! Salu2 -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/ -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org

Carlos E. R.

00:12

On 2017-03-13 01:00, Juan Erbes wrote:

...

El día 12 de marzo de 2017, 16:13, Carlos E. R. <> escribió:

...
On 2017-03-12 13:48, Juan Erbes wrote:

...

Monte la otra partición en /mnt y al ejecutar:

journalctl -D /mnt/var/log No journal files were found.

Te dije /mnt/var/log/journal/

...

Si existiera algun archivo, por mas que sea binario, debería tener un tamaño x, pero ni siquiera parece la carpeta journal,

También te dije, en el post inglés, que en ese caso tienes que crear el directorio y repetir tus pruebas para llenar el log. Claro que si el sistema no llega a arrancar, no habrá nada en ninguna parte. -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" (Minas Tirith))

Juan Erbes

00:22

El día 12 de marzo de 2017, 21:12, Carlos E. R. escribió:

...

On 2017-03-13 01:00, Juan Erbes wrote:

...
El día 12 de marzo de 2017, 16:13, Carlos E. R. <> escribió:

...
On 2017-03-12 13:48, Juan Erbes wrote:

...
Monte la otra partición en /mnt y al ejecutar:

journalctl -D /mnt/var/log No journal files were found.

Te dije /mnt/var/log/journal/

...
Si existiera algun archivo, por mas que sea binario, debería tener un tamaño x, pero ni siquiera parece la carpeta journal,

También te dije, en el post inglés, que en ese caso tienes que crear el directorio y repetir tus pruebas para llenar el log.

Claro que si el sistema no llega a arrancar, no habrá nada en ninguna parte.

De sistema que tengo activo, si voy y hago: /var/log> ls alternatives.log apcupsd.events-20170106 atftpd cups krb5 pbl.log samba tuned wtmp-20160424.xz Xorg.0.log.old apache2 apcupsd.events-20170109 audit faillog lastlog pk_backend_zypp snapper.log wpa_supplicant.log wtmp-20160808.xz YaST2 apcupsd.events apcupsd.events-20170307 boot.log hp mysql pk_backend_zypp-1 speech-dispatcher wtmp wtmp-20161106.xz zypp apcupsd.events-20161204 apparmor btmp journal ntp README tor wtmp-20160203.xz Xorg.0.log zypper.log Concretamente, Xorg.0.log.old es del arranque anterior, que es el que me interesa ver. Y se pueden ver archivos mas antiguos: wtmp-20160424.xz Salu2 -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/ -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org

Juan Erbes

00:34

El día 12 de marzo de 2017, 21:22, Juan Erbes escribió:

...

El día 12 de marzo de 2017, 21:12, Carlos E. R. escribió:

...
On 2017-03-13 01:00, Juan Erbes wrote:

...
El día 12 de marzo de 2017, 16:13, Carlos E. R. <> escribió:

...
On 2017-03-12 13:48, Juan Erbes wrote:

...
Monte la otra partición en /mnt y al ejecutar:

journalctl -D /mnt/var/log No journal files were found.

Te dije /mnt/var/log/journal/

...
Si existiera algun archivo, por mas que sea binario, debería tener un tamaño x, pero ni siquiera parece la carpeta journal,

También te dije, en el post inglés, que en ese caso tienes que crear el directorio y repetir tus pruebas para llenar el log.

Claro que si el sistema no llega a arrancar, no habrá nada en ninguna parte.

De sistema que tengo activo, si voy y hago: /var/log> ls alternatives.log apcupsd.events-20170106 atftpd cups krb5 pbl.log samba tuned wtmp-20160424.xz Xorg.0.log.old apache2 apcupsd.events-20170109 audit faillog lastlog pk_backend_zypp snapper.log wpa_supplicant.log wtmp-20160808.xz YaST2 apcupsd.events apcupsd.events-20170307 boot.log hp mysql pk_backend_zypp-1 speech-dispatcher wtmp wtmp-20161106.xz zypp apcupsd.events-20161204 apparmor btmp journal ntp README tor wtmp-20160203.xz Xorg.0.log zypper.log

Concretamente, Xorg.0.log.old es del arranque anterior, que es el que me interesa ver. Y se pueden ver archivos mas antiguos: wtmp-20160424.xz

Menos mal que había guardado los logs antes de actualizar el kernel en Leap 42.2: cat Xorg.0.log.old [ 21.737] (--) Log file renamed from "/var/log/Xorg.pid-1334.log" to "/var/log/Xorg.0.log" [ 21.738] X.Org X Server 1.18.3 Release Date: 2016-04-04 [ 21.738] X Protocol Version 11, Revision 0 [ 21.738] Build Operating System: openSUSE SUSE LINUX [ 21.738] Current Operating System: Linux linux-c4p0 4.4.49-16-default #1 SMP Sun Feb 19 17:40:35 UTC 2017 (70e9954) x86_64 [ 21.738] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.49-16-default root=UUID=9a4af042-8014-402b-ba6e-73449aea6d39 resume=/dev/disk/by-uuid/b72cc926-db3a-427b-8aad-bdc1e812bb6b splash=silent quiet showopts [ 21.738] Build Date: 30 January 2017 03:50:21PM [ 21.738] [ 21.738] Current version of pixman: 0.34.0 [ 21.738] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 21.738] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 21.738] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 11 22:44:33 2017 [ 21.738] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 21.738] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 21.738] (==) No Layout section. Using the first Screen section. [ 21.738] (==) No screen section available. Using defaults. [ 21.738] (**) |-->Screen "Default Screen Section" (0) [ 21.738] (**) | |-->Monitor "<default monitor>" [ 21.739] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 21.739] (**) | |-->Device "[AMD/ATI] Tonga XT / Amethyst XT" [ 21.739] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 21.739] (==) Automatically adding devices [ 21.739] (==) Automatically enabling devices [ 21.739] (==) Automatically adding GPU devices [ 21.739] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 21.739] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. [ 21.739] Entry deleted from font path. [ 21.739] (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/ghostscript/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/, built-ins [ 21.739] (**) ModulePath set to "/opt/amdgpu-pro/lib64/xorg/modules,/usr/lib64/xorg/modules" [ 21.739] (**) Extension "XFree86-DGA" is disabled [ 21.739] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 21.739] (II) Loader magic: 0x80fce0 [ 21.739] (II) Module ABI versions: [ 21.739] X.Org ANSI C Emulation: 0.4 [ 21.739] X.Org Video Driver: 20.0 [ 21.739] X.Org XInput driver : 22.1 [ 21.739] X.Org Server Extension : 9.0 [ 21.740] (++) using VT number 7 [ 21.740] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 21.742] (--) PCI:*(0:1:0:0) 1002:6938:1458:22c8 rev 241, Mem @ 0xc0000000/268435456, 0xdfe00000/2097152, 0xfdf80000/262144, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072 [ 21.742] (II) LoadModule: "glx" [ 21.742] (II) Loading /opt/amdgpu-pro/lib64/xorg/modules/extensions/libglx.so [ 21.744] (II) Module glx: vendor="X.Org Foundation" [ 21.744] compiled for 1.18.0, module version = 1.0.0 [ 21.744] ABI class: X.Org Server Extension, version 9.0 [ 21.745] (==) AIGLX enabled [ 21.745] (II) LoadModule: "amdgpu" [ 21.745] (II) Loading /opt/amdgpu-pro/lib64/xorg/modules/drivers/amdgpu_drv.so [ 21.745] (II) Module amdgpu: vendor="X.Org Foundation" [ 21.745] compiled for 1.18.3, module version = 1.2.99 [ 21.745] Module class: X.Org Video Driver [ 21.745] ABI class: X.Org Video Driver, version 20.0 [ 21.745] (II) AMDGPU: Driver for AMD Radeon: All GPUs supported by the amdgpu kernel driver [ 21.745] (II) [KMS] drm report modesetting isn't supported. [ 21.746] (EE) Screen 0 deleted because of no matching config section. [ 21.746] (II) UnloadModule: "amdgpu" [ 21.746] (EE) Device(s) detected, but none match those in the config file. [ 21.746] (EE) Fatal server error: [ 21.746] (EE) no screens found(EE) [ 21.746] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 21.746] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 21.746] (EE) [ 21.746] (EE) Server terminated with error (1). Closing log file. La clave está en estas 3 lineas: [ 21.745] (II) [KMS] drm report modesetting isn't supported. [ 21.746] (EE) Screen 0 deleted because of no matching config section. [ 21.746] (II) UnloadModule: "amdgpu" Lo extraño, que con el modulo de codigo abierto y la misma configuración, funciona perfecto (excepto la falta de rendimiento frente al propietario) cat Xorg.0.log [ 21.470] (--) Log file renamed from "/var/log/Xorg.pid-1373.log" to "/var/log/Xorg.0.log" [ 21.485] X.Org X Server 1.18.3 Release Date: 2016-04-04 [ 21.485] X Protocol Version 11, Revision 0 [ 21.485] Build Operating System: openSUSE SUSE LINUX [ 21.485] Current Operating System: Linux linux-c4p0 4.4.46-11-default #1 SMP Sat Feb 4 06:07:41 UTC 2017 (f555e41) x86_64 [ 21.485] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.46-11-default root=UUID=9a4af042-8014-402b-ba6e-73449aea6d39 resume=/dev/disk/by-uuid/b72cc926-db3a-427b-8aad-bdc1e812bb6b splash=silent quiet showopts [ 21.485] Build Date: 30 January 2017 03:50:21PM [ 21.485] [ 21.485] Current version of pixman: 0.34.0 [ 21.485] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 21.485] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 21.486] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 11 22:45:46 2017 [ 21.518] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 21.518] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 21.520] (==) No Layout section. Using the first Screen section. [ 21.520] (==) No screen section available. Using defaults. [ 21.520] (**) |-->Screen "Default Screen Section" (0) [ 21.520] (**) | |-->Monitor "<default monitor>" [ 21.520] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 21.520] (**) | |-->Device "[AMD/ATI] Tonga XT / Amethyst XT" [ 21.520] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 21.520] (==) Automatically adding devices [ 21.520] (==) Automatically enabling devices [ 21.520] (==) Automatically adding GPU devices [ 21.520] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 21.589] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. [ 21.589] Entry deleted from font path. [ 21.598] (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/ghostscript/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/, built-ins [ 21.598] (**) ModulePath set to "/opt/amdgpu-pro/lib64/xorg/modules,/usr/lib64/xorg/modules" [ 21.598] (**) Extension "XFree86-DGA" is disabled [ 21.598] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 21.598] (II) Loader magic: 0x80fce0 [ 21.598] (II) Module ABI versions: [ 21.598] X.Org ANSI C Emulation: 0.4 [ 21.598] X.Org Video Driver: 20.0 [ 21.598] X.Org XInput driver : 22.1 [ 21.598] X.Org Server Extension : 9.0 [ 21.600] (++) using VT number 7 [ 21.600] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 21.601] (II) xfree86: Adding drm device (/dev/dri/card0) [ 21.604] (--) PCI:*(0:1:0:0) 1002:6938:1458:22c8 rev 241, Mem @ 0xc0000000/268435456, 0xdfe00000/2097152, 0xfdf80000/262144, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072 [ 21.604] (II) LoadModule: "glx" [ 21.604] (II) Loading /opt/amdgpu-pro/lib64/xorg/modules/extensions/libglx.so [ 21.709] (II) Module glx: vendor="X.Org Foundation" [ 21.709] compiled for 1.18.0, module version = 1.0.0 [ 21.709] ABI class: X.Org Server Extension, version 9.0 [ 21.709] (==) AIGLX enabled [ 21.709] (II) LoadModule: "amdgpu" [ 21.710] (II) Loading /opt/amdgpu-pro/lib64/xorg/modules/drivers/amdgpu_drv.so [ 21.759] (II) Module amdgpu: vendor="X.Org Foundation" [ 21.759] compiled for 1.18.3, module version = 1.2.99 [ 21.759] Module class: X.Org Video Driver [ 21.759] ABI class: X.Org Video Driver, version 20.0 [ 21.759] (II) AMDGPU: Driver for AMD Radeon: All GPUs supported by the amdgpu kernel driver [ 21.765] (II) [KMS] Kernel modesetting enabled. [ 21.765] (II) AMDGPU(0): ShareFD: disabled [ 21.765] (DB) AMDGPU(0): open fd=20 [ 21.765] (II) AMDGPU(0): AMDGPU DDX hybrid version: 16.60.3 [ 21.765] (II) AMDGPU(0): AMDGPU kernel module hybrid version: 16.60.3 [ 21.765] (II) AMDGPU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 21.765] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32 [ 21.765] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 21.765] (==) AMDGPU(0): Default visual is TrueColor [ 21.765] (**) AMDGPU(0): Option "DRI3" "1" [ 21.765] (**) AMDGPU(0): Option "TearFree" "on" [ 21.765] (==) AMDGPU(0): RGB weight 888 [ 21.765] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC) [ 21.765] (--) AMDGPU(0): Chipset: "AMD Radeon (TM) R9 380 Series" (ChipID = 0x6938) [ 21.765] (II) Loading sub module "fb" [ 21.765] (II) LoadModule: "fb" [ 21.816] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 21.859] (II) Module fb: vendor="X.Org Foundation" [ 21.859] compiled for 1.18.3, module version = 1.0.0 [ 21.859] ABI class: X.Org ANSI C Emulation, version 0.4 [ 21.859] (II) Loading sub module "dri2" [ 21.859] (II) LoadModule: "dri2" [ 21.859] (II) Module "dri2" already built-in [ 21.925] (II) Loading sub module "glamoregl" [ 21.925] (II) LoadModule: "glamoregl" [ 21.926] (II) Loading /opt/amdgpu-pro/lib64/xorg/modules/libglamoregl.so [ 22.049] (II) Module glamoregl: vendor="X.Org Foundation" [ 22.049] compiled for 1.18.3, module version = 1.0.0 [ 22.049] ABI class: X.Org ANSI C Emulation, version 0.4 [ 22.049] (II) glamor: OpenGL accelerated X.org driver based. [ 22.823] (II) glamor: EGL version 1.4: [ 22.848] (II) AMDGPU(0): glamor detected, initialising EGL layer. [ 22.848] (**) AMDGPU(0): TearFree enabled [ 22.848] (WW) AMDGPU(0): KMS Pageflipping: disabled because of ShadowPrimary/TearFree [ 22.849] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section [ 22.849] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section [ 22.849] (II) AMDGPU(0): Output DVI-D-0 has no monitor section [ 22.849] (II) AMDGPU(0): Output DVI-D-1 has no monitor section [ 22.849] (II) AMDGPU(0): EDID for output DisplayPort-0 [ 22.849] (II) AMDGPU(0): EDID for output HDMI-A-0 [ 22.849] (II) AMDGPU(0): Manufacturer: SAM Model: ad2 Serial#: 0 [ 22.849] (II) AMDGPU(0): Year: 2013 Week: 3 [ 22.849] (II) AMDGPU(0): EDID Version: 1.3 [ 22.849] (II) AMDGPU(0): Digital Display Input [ 22.849] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 48 vert.: 27 [ 22.849] (II) AMDGPU(0): Gamma: 2.20 [ 22.849] (II) AMDGPU(0): No DPMS capabilities specified [ 22.849] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 22.849] (II) AMDGPU(0): First detailed timing is preferred mode [ 22.849] (II) AMDGPU(0): redX: 0.647 redY: 0.333 greenX: 0.332 greenY: 0.626 [ 22.849] (II) AMDGPU(0): blueX: 0.156 blueY: 0.052 whiteX: 0.312 whiteY: 0.329 [ 22.849] (II) AMDGPU(0): Supported established timings: [ 22.849] (II) AMDGPU(0): 720x400@70Hz [ 22.849] (II) AMDGPU(0): 640x480@60Hz [ 22.849] (II) AMDGPU(0): 640x480@67Hz [ 22.849] (II) AMDGPU(0): 640x480@72Hz [ 22.849] (II) AMDGPU(0): 640x480@75Hz [ 22.849] (II) AMDGPU(0): 800x600@60Hz [ 22.849] (II) AMDGPU(0): 800x600@72Hz [ 22.849] (II) AMDGPU(0): 800x600@75Hz [ 22.849] (II) AMDGPU(0): 832x624@75Hz [ 22.849] (II) AMDGPU(0): 1024x768@60Hz [ 22.850] (II) AMDGPU(0): 1024x768@70Hz [ 22.850] (II) AMDGPU(0): 1024x768@75Hz [ 22.850] (II) AMDGPU(0): 1280x1024@75Hz [ 22.850] (II) AMDGPU(0): 1152x864@75Hz [ 22.850] (II) AMDGPU(0): Manufacturer's mask: 0 [ 22.850] (II) AMDGPU(0): Supported standard timings: [ 22.850] (II) AMDGPU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 22.850] (II) AMDGPU(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 22.850] (II) AMDGPU(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 22.850] (II) AMDGPU(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 22.850] (II) AMDGPU(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 22.850] (II) AMDGPU(0): #5: hsize: 1600 vsize 900 refresh: 60 vid: 49321 [ 22.850] (II) AMDGPU(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 22.850] (II) AMDGPU(0): Supported detailed timing: [ 22.850] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 477 x 268 mm [ 22.850] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 22.850] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 22.850] (II) AMDGPU(0): Supported detailed timing: [ 22.850] (II) AMDGPU(0): clock: 85.5 MHz Image Size: 477 x 268 mm [ 22.850] (II) AMDGPU(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0 [ 22.850] (II) AMDGPU(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0 [ 22.850] (II) AMDGPU(0): Ranges: V min: 24 V max: 75 Hz, H min: 15 H max: 81 kHz, PixClock max 235 MHz [ 22.850] (II) AMDGPU(0): Monitor name: T22C301 [ 22.850] (II) AMDGPU(0): Supported detailed timing: [ 22.850] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 477 x 268 mm [ 22.850] (II) AMDGPU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0 [ 22.850] (II) AMDGPU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 22.850] (II) AMDGPU(0): Supported detailed timing: [ 22.850] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 477 x 268 mm [ 22.850] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 22.850] (II) AMDGPU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0 [ 22.850] (II) AMDGPU(0): Supported detailed timing: [ 22.850] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 477 x 268 mm [ 22.850] (II) AMDGPU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0 [ 22.850] (II) AMDGPU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 22.850] (II) AMDGPU(0): Supported detailed timing: [ 22.850] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 477 x 268 mm [ 22.850] (II) AMDGPU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0 [ 22.850] (II) AMDGPU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0 [ 22.850] (II) AMDGPU(0): Number of EDID sections to follow: 1 [ 22.850] (II) AMDGPU(0): EDID (in hex): [ 22.850] (II) AMDGPU(0): 00ffffffffffff004c2dd20a00000000 [ 22.850] (II) AMDGPU(0): 0317010380301b780ad111a55555a028 [ 22.850] (II) AMDGPU(0): 0d5054bdef80714f81c0810081809500 [ 22.850] (II) AMDGPU(0): a9c0b3000101023a801871382d40582c [ 22.850] (II) AMDGPU(0): 4500dd0c1100001e662156aa51001e30 [ 22.850] (II) AMDGPU(0): 468f3300dd0c1100001e000000fd0018 [ 22.850] (II) AMDGPU(0): 4b0f5117000a202020202020000000fc [ 22.850] (II) AMDGPU(0): 00543232433330310a20202020200152 [ 22.850] (II) AMDGPU(0): 020325f14d901f041305140312202122 [ 22.850] (II) AMDGPU(0): 07162309070783010000e2000f67030c [ 22.850] (II) AMDGPU(0): 001000b82d011d007251d01e206e2855 [ 22.850] (II) AMDGPU(0): 00dd0c1100001e011d8018711c162058 [ 22.850] (II) AMDGPU(0): 2c2500dd0c1100009e011d00bc52d01e [ 22.850] (II) AMDGPU(0): 20b8285540dd0c1100001e011d80d072 [ 22.850] (II) AMDGPU(0): 1c1620102c2580dd0c1100009e000000 [ 22.850] (II) AMDGPU(0): 000000000000000000000000000000ec [ 22.850] (--) AMDGPU(0): HDMI max TMDS frequency 225000KHz [ 22.850] (II) AMDGPU(0): Printing probed modes for output HDMI-A-0 [ 22.850] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 22.850] (II) AMDGPU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1920x1080"x25.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1366x768"x59.8 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 22.850] (II) AMDGPU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 22.850] (II) AMDGPU(0): EDID for output DVI-D-0 [ 22.850] (II) AMDGPU(0): EDID for output DVI-D-1 [ 22.850] (II) AMDGPU(0): Output DisplayPort-0 disconnected [ 22.850] (II) AMDGPU(0): Output HDMI-A-0 connected [ 22.850] (II) AMDGPU(0): Output DVI-D-0 disconnected [ 22.850] (II) AMDGPU(0): Output DVI-D-1 disconnected [ 22.850] (II) AMDGPU(0): Using exact sizes for initial modes [ 22.850] (II) AMDGPU(0): Output HDMI-A-0 using initial mode 1920x1080 +0+0 [ 22.850] (II) AMDGPU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 22.850] (II) AMDGPU(0): mem size init: gart size :ffe40000 vram size: s:fecb4000 visible:bf187000 [ 22.850] (II) AMDGPU(0): Video RAM: 4174544 kByte [ 22.850] (==) AMDGPU(0): DPI set to (96, 96) [ 22.850] (II) Loading sub module "ramdac" [ 22.850] (II) LoadModule: "ramdac" [ 22.850] (II) Module "ramdac" already built-in [ 22.850] (--) Depth 24 pixmap format is 32 bpp [ 22.850] (II) AMDGPU(0): [DRI2] Setup complete [ 22.850] (II) AMDGPU(0): [DRI2] DRI driver: amdgpu [ 22.850] (II) AMDGPU(0): [DRI2] VDPAU driver: amdgpu [ 22.851] (II) AMDGPU(0): Front buffer pitch: 8192 bytes [ 22.851] (II) AMDGPU(0): SYNC extension fences enabled [ 22.851] (II) AMDGPU(0): Present extension enabled [ 22.851] (**) AMDGPU(0): DRI3 enabled [ 22.851] (==) AMDGPU(0): Backing store enabled [ 22.851] (II) AMDGPU(0): Direct rendering enabled [ 22.929] (II) AMDGPU(0): Use GLAMOR acceleration. [ 22.929] (II) AMDGPU(0): Acceleration enabled [ 22.929] (==) AMDGPU(0): DPMS enabled [ 22.929] (==) AMDGPU(0): Silken mouse enabled [ 22.929] (II) AMDGPU(0): Set up textured video (glamor) [ 22.929] (II) AMDGPU(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 22.930] (--) RandR disabled [ 22.951] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 22.951] (II) AIGLX: enabled GLX_ARB_create_context [ 22.951] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 22.951] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 22.951] (II) AIGLX: enabled GLX_INTEL_swap_event [ 22.951] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 22.951] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 22.951] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 22.951] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 22.952] (II) AIGLX: Loaded and initialized amdgpu [ 22.952] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 22.954] (II) AMDGPU(0): Setting screen physical size to 508 x 285 [ 23.341] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 23.341] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 23.341] (**) Power Button: Applying InputClass "system-keyboard" [ 23.341] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 23.341] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 23.341] (II) LoadModule: "libinput" [ 23.341] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so [ 23.397] (II) Module libinput: vendor="X.Org Foundation" [ 23.397] compiled for 1.18.3, module version = 0.19.1 [ 23.397] Module class: X.Org XInput Driver [ 23.397] ABI class: X.Org XInput driver, version 22.1 [ 23.397] (II) Using input driver 'libinput' for 'Power Button' [ 23.397] (**) Power Button: always reports core events [ 23.397] (**) Option "Device" "/dev/input/event3" [ 23.397] (**) Option "_source" "server/udev" [ 23.398] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard [ 23.398] (II) input device 'Power Button', /dev/input/event3 is a keyboard [ 23.412] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 23.412] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 23.412] (**) Option "xkb_model" "microsoftpro" [ 23.412] (**) Option "xkb_layout" "latam" [ 23.412] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 23.449] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard [ 23.449] (II) input device 'Power Button', /dev/input/event3 is a keyboard [ 23.450] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 23.450] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 23.450] (**) Power Button: Applying InputClass "system-keyboard" [ 23.450] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 23.450] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 23.450] (II) Using input driver 'libinput' for 'Power Button' [ 23.450] (**) Power Button: always reports core events [ 23.450] (**) Option "Device" "/dev/input/event2" [ 23.450] (**) Option "_source" "server/udev" [ 23.451] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard [ 23.451] (II) input device 'Power Button', /dev/input/event2 is a keyboard [ 23.472] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2" [ 23.472] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 23.472] (**) Option "xkb_model" "microsoftpro" [ 23.472] (**) Option "xkb_layout" "latam" [ 23.472] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 23.473] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard [ 23.473] (II) input device 'Power Button', /dev/input/event2 is a keyboard [ 23.474] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event10) [ 23.475] (II) No input driver specified, ignoring this device. [ 23.475] (II) This device may have been added with another device file. [ 23.475] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5) [ 23.475] (II) No input driver specified, ignoring this device. [ 23.475] (II) This device may have been added with another device file. [ 23.476] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event6) [ 23.476] (II) No input driver specified, ignoring this device. [ 23.476] (II) This device may have been added with another device file. [ 23.477] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event7) [ 23.477] (II) No input driver specified, ignoring this device. [ 23.477] (II) This device may have been added with another device file. [ 23.477] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event8) [ 23.477] (II) No input driver specified, ignoring this device. [ 23.477] (II) This device may have been added with another device file. [ 23.478] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event9) [ 23.478] (II) No input driver specified, ignoring this device. [ 23.478] (II) This device may have been added with another device file. [ 23.479] (II) config/udev: Adding input device Genius USB Optical Mouse (/dev/input/event1) [ 23.479] (**) Genius USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 23.479] (**) Genius USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 23.479] (**) Genius USB Optical Mouse: Applying InputClass "libinput pointer catchall" [ 23.479] (II) Using input driver 'libinput' for 'Genius USB Optical Mouse' [ 23.479] (**) Genius USB Optical Mouse: always reports core events [ 23.479] (**) Option "Device" "/dev/input/event1" [ 23.479] (**) Option "_source" "server/udev" [ 23.532] (II) input device 'Genius USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse [ 23.532] (II) input device 'Genius USB Optical Mouse', /dev/input/event1 is a pointer caps [ 23.584] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/0003:0458:00EC.0001/input/input1/event1" [ 23.584] (II) XINPUT: Adding extended input device "Genius USB Optical Mouse" (type: MOUSE, id 8) [ 23.584] (**) Option "AccelerationScheme" "none" [ 23.584] (**) Genius USB Optical Mouse: (accel) selected scheme none/0 [ 23.584] (**) Genius USB Optical Mouse: (accel) acceleration factor: 2.000 [ 23.584] (**) Genius USB Optical Mouse: (accel) acceleration threshold: 4 [ 23.640] (II) input device 'Genius USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse [ 23.640] (II) input device 'Genius USB Optical Mouse', /dev/input/event1 is a pointer caps [ 23.641] (II) config/udev: Adding input device Genius USB Optical Mouse (/dev/input/mouse0) [ 23.641] (II) No input driver specified, ignoring this device. [ 23.641] (II) This device may have been added with another device file. [ 23.642] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 23.642] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 23.642] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 23.642] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 23.642] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 23.642] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 23.642] (**) AT Translated Set 2 keyboard: always reports core events [ 23.642] (**) Option "Device" "/dev/input/event0" [ 23.642] (**) Option "_source" "server/udev" [ 23.643] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard [ 23.643] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard [ 23.672] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 23.672] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 23.672] (**) Option "xkb_model" "microsoftpro" [ 23.672] (**) Option "xkb_layout" "latam" [ 23.672] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 23.673] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard [ 23.673] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard [ 23.674] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [ 23.674] (II) No input driver specified, ignoring this device. [ 23.674] (II) This device may have been added with another device file. [ 34.029] (II) AMDGPU(0): EDID vendor "SAM", prod id 2770 [ 34.029] (II) AMDGPU(0): Using EDID range info for horizontal sync [ 34.029] (II) AMDGPU(0): Using EDID range info for vertical refresh [ 34.029] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 34.029] (II) AMDGPU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 34.029] (II) AMDGPU(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz e) [ 34.029] (II) AMDGPU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 34.029] (II) AMDGPU(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 34.029] (II) AMDGPU(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 34.029] (II) AMDGPU(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 34.029] (II) AMDGPU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 34.029] (II) AMDGPU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 34.029] (II) AMDGPU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 34.029] (II) AMDGPU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 34.029] (II) AMDGPU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 34.029] (II) AMDGPU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 34.029] (II) AMDGPU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e) [ 34.030] (II) AMDGPU(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e) [ 34.030] (--) AMDGPU(0): HDMI max TMDS frequency 225000KHz [ 35.306] (II) AMDGPU(0): EDID vendor "SAM", prod id 2770 [ 35.306] (II) AMDGPU(0): Using hsync ranges from config file [ 35.306] (II) AMDGPU(0): Using vrefresh ranges from config file [ 35.306] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 35.306] (II) AMDGPU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 35.306] (II) AMDGPU(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 35.306] (II) AMDGPU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 35.307] (II) AMDGPU(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 35.307] (II) AMDGPU(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e) [ 35.307] (II) AMDGPU(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e) [ 35.307] (II) AMDGPU(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e) [ 35.307] (II) AMDGPU(0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e) [ 35.307] (II) AMDGPU(0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 35.307] (II) AMDGPU(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e) [ 35.307] (II) AMDGPU(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e) [ 35.307] (--) AMDGPU(0): HDMI max TMDS frequency 225000KHz -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/ -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org

Carlos E. R.

00:47

On 2017-03-13 01:34, Juan Erbes wrote:

...

El día 12 de marzo de 2017, 21:22, Juan Erbes <> escribió:

...
El día 12 de marzo de 2017, 21:12, Carlos E. R.

...

...
De sistema que tengo activo, si voy y hago: /var/log> ls

...

...
apcupsd.events-20161204 apparmor btmp journal

---------------------------------------------------------------^^^^^^^^ Ahí lo tienes, el journal.

...

Menos mal que había guardado los logs antes de actualizar el kernel en Leap 42.2:

cat Xorg.0.log.old ... [ 21.745] (II) AMDGPU: Driver for AMD Radeon: All GPUs supported by the amdgpu kernel driver [ 21.745] (II) [KMS] drm report modesetting isn't supported. [ 21.746] (EE) Screen 0 deleted because of no matching config section. [ 21.746] (II) UnloadModule: "amdgpu" [ 21.746] (EE) Device(s) detected, but none match those in the config file. [ 21.746] (EE) Fatal server error: [ 21.746] (EE) no screens found(EE) [ 21.746] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help.

Pues ahí lo tienes.

...

[ 21.746] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 21.746] (EE) [ 21.746] (EE) Server terminated with error (1). Closing log file.

La clave está en estas 3 lineas: [ 21.745] (II) [KMS] drm report modesetting isn't supported. [ 21.746] (EE) Screen 0 deleted because of no matching config section. [ 21.746] (II) UnloadModule: "amdgpu"

Lo extraño, que con el modulo de codigo abierto y la misma configuración, funciona perfecto (excepto la falta de rendimiento frente al propietario)

cat Xorg.0.log

Lo siento, se muy poco de ese tema. -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" (Minas Tirith))

Rafa Griman

18:53

Hola :) On Mon, Mar 13, 2017 at 3:47 AM, Carlos E. R. wrote:

...

On 2017-03-13 01:34, Juan Erbes wrote:

...
El día 12 de marzo de 2017, 21:22, Juan Erbes <> escribió:

...
El día 12 de marzo de 2017, 21:12, Carlos E. R.

...
...
De sistema que tengo activo, si voy y hago: /var/log> ls

...
...
apcupsd.events-20161204 apparmor btmp journal

---------------------------------------------------------------^^^^^^^^

Ahí lo tienes, el journal.

...
Menos mal que había guardado los logs antes de actualizar el kernel en Leap 42.2:

cat Xorg.0.log.old ... [ 21.745] (II) AMDGPU: Driver for AMD Radeon: All GPUs supported by the amdgpu kernel driver [ 21.745] (II) [KMS] drm report modesetting isn't supported. [ 21.746] (EE) Screen 0 deleted because of no matching config section. [ 21.746] (II) UnloadModule: "amdgpu" [ 21.746] (EE) Device(s) detected, but none match those in the config file. [ 21.746] (EE) Fatal server error: [ 21.746] (EE) no screens found(EE) [ 21.746] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help.

Pues ahí lo tienes.

...
[ 21.746] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 21.746] (EE) [ 21.746] (EE) Server terminated with error (1). Closing log file.

La clave está en estas 3 lineas: [ 21.745] (II) [KMS] drm report modesetting isn't supported. [ 21.746] (EE) Screen 0 deleted because of no matching config section. [ 21.746] (II) UnloadModule: "amdgpu"

Lo extraño, que con el modulo de codigo abierto y la misma configuración, funciona perfecto (excepto la falta de rendimiento frente al propietario)

cat Xorg.0.log

Lo siento, se muy poco de ese tema.

Juan, borra el fichero de configuración de las X (generalmente /etc/X11/xorg.conf). A mi me ha pasado algo similar y al borrar el fichero de configuración,las X autodetectan todo y funciona. HTH Rafa -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org

Juan Erbes

14 Mar 14 Mar

00:55

El día 13 de marzo de 2017, 15:53, Rafa Griman escribió:

...

Hola :)

On Mon, Mar 13, 2017 at 3:47 AM, Carlos E. R. wrote:

...
On 2017-03-13 01:34, Juan Erbes wrote:

...
El día 12 de marzo de 2017, 21:22, Juan Erbes <> escribió:

...
El día 12 de marzo de 2017, 21:12, Carlos E. R.

...
...
De sistema que tengo activo, si voy y hago: /var/log> ls

...
...
apcupsd.events-20161204 apparmor btmp journal

---------------------------------------------------------------^^^^^^^^

Ahí lo tienes, el journal.

...
Menos mal que había guardado los logs antes de actualizar el kernel en Leap 42.2:

cat Xorg.0.log.old ... [ 21.745] (II) AMDGPU: Driver for AMD Radeon: All GPUs supported by the amdgpu kernel driver [ 21.745] (II) [KMS] drm report modesetting isn't supported. [ 21.746] (EE) Screen 0 deleted because of no matching config section. [ 21.746] (II) UnloadModule: "amdgpu" [ 21.746] (EE) Device(s) detected, but none match those in the config file. [ 21.746] (EE) Fatal server error: [ 21.746] (EE) no screens found(EE) [ 21.746] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help.

Pues ahí lo tienes.

...
[ 21.746] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 21.746] (EE) [ 21.746] (EE) Server terminated with error (1). Closing log file.

La clave está en estas 3 lineas: [ 21.745] (II) [KMS] drm report modesetting isn't supported. [ 21.746] (EE) Screen 0 deleted because of no matching config section. [ 21.746] (II) UnloadModule: "amdgpu"

Lo extraño, que con el modulo de codigo abierto y la misma configuración, funciona perfecto (excepto la falta de rendimiento frente al propietario)

cat Xorg.0.log

Lo siento, se muy poco de ese tema.

Juan, borra el fichero de configuración de las X (generalmente /etc/X11/xorg.conf). A mi me ha pasado algo similar y al borrar el fichero de configuración,las X autodetectan todo y funciona.

No existe el xorg.conf: /mnt/etc/X11 # ls -l total 28 -rw-r--r-- 1 root root 954 oct 7 21:39 qtrc drwxr-xr-x 1 root root 414 mar 12 00:21 xdm -rw-r--r-- 1 root root 7003 oct 8 08:39 xim drwxr-xr-x 1 root root 8 ene 7 20:56 xim.d drwxr-xr-x 1 root root 78 ene 25 06:07 xinit -rw-r--r-- 1 root root 1353 oct 7 14:43 Xmodmap -rw-r--r-- 1 root root 1049 oct 7 14:43 Xmodmap.remote drwxr-xr-x 1 root root 378 mar 12 00:16 xorg.conf.d -rw-r--r-- 1 root root 874 ene 7 21:09 xorg.conf.install drwxr-xr-x 1 root root 50 mar 11 23:41 xorg_pci_ids -rw-r--r-- 1 root root 4017 abr 22 2009 Xresources Como no funcionaba, cree el archivo 20-amdgpu.conf Section "Device" Identifier "[AMD/ATI] Tonga XT / Amethyst XT" Driver "amdgpu" BusID "PCI:1:0:0" Option "DRI3" "1" Option "TearFree" "on" EndSection De acuerdo a: https://forums.opensuse.org/showthread.php/519730-Installation-of-AMDGPU-PRO... Salu2 -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/ -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org

Carlos E. R.

01:32

On 2017-03-14 01:55, Juan Erbes wrote:

...

El día 13 de marzo de 2017, 15:53, Rafa Griman <> escribió:

...
Hola :)

...

...
Juan, borra el fichero de configuración de las X (generalmente /etc/X11/xorg.conf). A mi me ha pasado algo similar y al borrar el fichero de configuración,las X autodetectan todo y funciona.

No existe el xorg.conf:

Pero si un directorio xorg.conf.d/, borra todo lo que hayas metido ahí. No lo que sea original de la distro. -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" (Minas Tirith))

2607

Age (days ago)

2609

Last active (days ago)

List overview

Download

10 comments

3 participants

participants (3)

Carlos E. R.
Juan Erbes
Rafa Griman

[opensuse-es] Como se hace para ver los logs de otra partición de sistema?

tags

participants (3)