On Mar 06 Sep 2011 06:34:02 Octavio escribió:

El día 6 de septiembre de 2011 04:31, Alfredo Jesús Delaiti

escribió:

...

Hola

Para poder ayudarte es necesario que nos digas que modelo y marca de tarjeta es. Si podes ver los números que pone el bios de cada componente cuando arranca al la pc también puede ayudar. Enlace al fabricante sirve.

Saludos,

Alfredo

Alfredo, la tarjeta es WinTV PVR 150, de Hauppage. Si sirve, copio la información de hardware que me da el sistema.. Muchas gracias -- Un saludo. Ric -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org

On Mar 06 Sep 2011 14:07:31 Alfredo Jesús Delaiti escribió:

Hola

El 06/09/11 07:45, Ric escribió:

...

Alfredo, la tarjeta es WinTV PVR 150, de Hauppage. Si sirve, copio la información de hardware que me da el sistema.. Muchas gracias

Ahora si te podemos ayudar. Supongo que habrás mirado las siguientes páginas:

http://www.hauppauge.com/site/support/support_pvr150.html http://www.mythtv.org/wiki/Hauppauge_PVR-150 http://www.mythtv.org/wiki/Opensuse_10.2#IVTV.2C_the_analogue_TV_card

No se cual es la edición de OpenSuse que estas usando, pero como con la serie 11.X esta soportada, voy a suponer que estas utilizando alguna de ellas. Es necesario que nos envíes lo que te da el comando dmesg después de que iniciaste la pc. Si usas KDE con Konsole lo puedes hacer. O el contenido de "/var/log/boot.msg".

Si tienes una cámara web en tu PC, para ver la TV con TVTIME es necesario que lo lances así:"tvtime -d /dev/video1" puesto que el sistema utilizará video0 para la webcam. Para obtener más opciones "man tvtime".

Saludos y comenta que paso.

Alfredo

Aclaro que estoy usando openSuse 11.4 Las páginas que me mencionas, junto a búsquedas que hice con el amigo Google, no me ayudaron. Desde que tentgo este equipo (una HP Slimline algo viejita ya) vengo probando con distintas versiones y distribuciones sin éxito. Me acordé de esta lista que consultaba hace unos años y aquí estoy, antes de darme por vencido ;-) Tampco tengo conectado Webcam en este pc. Paso el contenido de dmesg, y por cierto, muchas gracias por tu molestia: ric@linux-x9xa:~> dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37.6-0.7-desktop (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP PREEMPT 2011-07-21 02:17:24 +0200 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: HP-Pavilion KN282AA-ABM s3440la/Acacia, BIOS 5.15 04/01/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f5440] f5440 [ 0.000000] initial memory mapped : 0 - 01000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000371fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00371fe000 page 4k [ 0.000000] kernel direct mapping tables up to 371fe000 @ ff6000-1000000 [ 0.000000] RAMDISK: 37573000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 36781000 - 371fd7c7 [ 0.000000] Move RAMDISK from 0000000037573000 - 0000000037fef7c6 to 36781000 - 371fd7c6 [ 0.000000] ACPI: RSDP 000f7580 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 7fef3100 00054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 7fef7dc0 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 7fef32c0 04AA2 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 7fef0000 00040 [ 0.000000] ACPI: SLIC 7fef8000 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 7fef81c0 00206 (v01 HPQOEM SLIC-CPC 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 7fef8440 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 7fef84c0 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 7fef7f00 00098 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] could not find any ACPI SRAT memory areas. [ 0.000000] failed to get NUMA memory information from SRAT table [ 0.000000] NUMA - single node, flat memory mode [ 0.000000] Node: 0, start_pfn: 0, end_pfn: 7fef0 [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 [ 0.000000] node 0 pfn: [0 - 7fef0] [ 0.000000] Reserving 4096 pages of KVA for lmem_map of node 0 at 7ee00 [ 0.000000] Reserving total of 1000 pages for numa KVA remap [ 0.000000] kva_start_pfn ~ 35600 max_low_pfn ~ 371fe [ 0.000000] max_pfn = 7fef0 [ 0.000000] 1164MB HIGHMEM available. [ 0.000000] 881MB LOWMEM available. [ 0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe [ 0.000000] Low memory ends at vaddr f71fe000 [ 0.000000] node 0 will remap to vaddr f5600000 - f6600000 [ 0.000000] allocate_pgdat: node 0 NODE_DATA f5600000 [ 0.000000] remap_numa_kva: node 0 [ 0.000000] remap_numa_kva: f5600000 to pfn 0007ee00 [ 0.000000] remap_numa_kva: f5800000 to pfn 0007f000 [ 0.000000] remap_numa_kva: f5a00000 to pfn 0007f200 [ 0.000000] remap_numa_kva: f5c00000 to pfn 0007f400 [ 0.000000] remap_numa_kva: f5e00000 to pfn 0007f600 [ 0.000000] remap_numa_kva: f6000000 to pfn 0007f800 [ 0.000000] remap_numa_kva: f6200000 to pfn 0007fa00 [ 0.000000] remap_numa_kva: f6400000 to pfn 0007fc00 [ 0.000000] High memory starts at vaddr f71fe000 [ 0.000000] mapped low ram: 0 - 371fe000 [ 0.000000] low ram: 0 - 371fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000371fe [ 0.000000] HighMem 0x000371fe -> 0x0007fef0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fef0 [ 0.000000] On node 0 totalpages: 523903 [ 0.000000] free_area_init_node: node 0, pgdat f5600000, node_mem_map f4600200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1732 pages used for memmap [ 0.000000] Normal zone: 219962 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2330 pages used for memmap [ 0.000000] HighMem zone: 295896 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:8 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f4400000 s28160 r0 d20992 u524288 [ 0.000000] pcpu-alloc: s28160 r0 d20992 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519809 [ 0.000000] Policy zone: HighMem [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata- SAMSUNG_HD501LJ_S10NJDWQ321600-part6 resume=/dev/disk/by-id/ata- SAMSUNG_HD501LJ_S10NJDWQ321600-part5 splash=silent quiet vga=0x31a [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10480000 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000371fe:0007fef0) [ 0.000000] Memory: 2014708k/2096064k available (4701k kernel code, 64520k reserved, 3495k data, 452k init, 1176520k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xff5b4000 - 0xfffff000 (10540 kB) [ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB) [ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB) [ 0.000000] .init : 0xc0a02000 - 0xc0a73000 ( 452 kB) [ 0.000000] .data : 0xc069753d - 0xc0a01508 (3495 kB) [ 0.000000] .text : 0xc0200000 - 0xc069753d (4701 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:8448 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f340c000 soft=f340e000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2100.069 MHz processor. [ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.13 BogoMIPS (lpj=2100069) [ 0.001010] pid_max: default: 32768 minimum: 301 [ 0.001068] Security Framework initialized [ 0.001085] AppArmor: AppArmor initialized [ 0.001148] Mount-cache hash table entries: 512 [ 0.001279] Initializing cgroup subsys ns [ 0.001282] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.001286] Initializing cgroup subsys cpuacct [ 0.001290] Initializing cgroup subsys memory [ 0.001303] Initializing cgroup subsys devices [ 0.001306] Initializing cgroup subsys freezer [ 0.001308] Initializing cgroup subsys net_cls [ 0.001310] Initializing cgroup subsys blkio [ 0.001346] CPU: Physical Processor ID: 0 [ 0.001348] CPU: Processor Core ID: 0 [ 0.001351] mce: CPU supports 5 MCE banks [ 0.001360] using C1E aware idle routine [ 0.001368] Performance Events: AMD PMU driver. [ 0.001372] ... version: 0 [ 0.001373] ... bit width: 48 [ 0.001375] ... generic registers: 4 [ 0.001377] ... value mask: 0000ffffffffffff [ 0.001378] ... max period: 00007fffffffffff [ 0.001380] ... fixed-purpose events: 0 [ 0.001382] ... event mask: 000000000000000f [ 0.002116] ACPI: Core revision 20101013 [ 0.010102] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.010337] Mapping cpu 0 to node 0 [ 0.010561] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.021060] CPU0: AMD Athlon(tm) Dual Core Processor 4050e stepping 02 [ 0.024016] NMI watchdog enabled, takes one hw-pmu counter. [ 0.028020] CPU 1 irqstacks, hard=f34a0000 soft=f34a2000 [ 0.028027] Booting Node 0, Processors #1 [ 0.001999] Initializing CPU#1 [ 0.001999] Mapping cpu 1 to node 0 [ 0.099099] NMI watchdog enabled, takes one hw-pmu counter. [ 0.100005] Brought up 2 CPUs [ 0.100008] Total of 2 processors activated (8399.87 BogoMIPS). [ 0.100279] devtmpfs: initialized [ 0.100279] regulator: core version 0.5 [ 0.100279] regulator: dummy: [ 0.100279] Time: 14:18:11 Date: 09/06/11 [ 0.100321] NET: Registered protocol family 16 [ 0.101091] node 0 link 0: io port [b000, ffff] [ 0.101096] TOM: 0000000080000000 aka 2048M [ 0.101099] node 0 link 0: mmio [a0000, bffff] [ 0.101102] node 0 link 0: mmio [80000000, efffffff] [ 0.101105] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.101108] node 0 link 0: mmio [f0000000, f02fffff] [ 0.101111] bus: [00, 02] on node 0 link 0 [ 0.101114] bus: 00 index 0 [io 0x0000-0xffff] [ 0.101117] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.101119] bus: 00 index 2 [mem 0x80000000-0xf3ffffff] [ 0.101122] bus: 00 index 3 [mem 0xf4000000-0xfcffffffff] [ 0.101222] ACPI: bus type pci registered [ 0.101323] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.101327] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.101329] PCI: Using MMCONFIG for extended config space [ 0.101331] PCI: Using configuration type 1 for base access [ 0.102326] bio: create slab <bio-0> at 0 [ 0.104106] ACPI: EC: Look up EC in DSDT [ 0.110448] ACPI: Interpreter enabled [ 0.110453] ACPI: (supports S0 S1 S3 S4 S5) [ 0.110484] ACPI: Using IOAPIC for interrupt routing [ 0.110784] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.112875] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.113401] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.118488] ACPI: No dock devices found. [ 0.118492] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.118615] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.118862] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.118865] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.118868] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.118871] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.118874] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] [ 0.118905] pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500 [ 0.119066] pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601 [ 0.119106] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05 [ 0.119118] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f] [ 0.119133] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f] [ 0.119139] pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f] [ 0.119160] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.119166] pci 0000:00:01.1: PME# disabled [ 0.119178] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500 [ 0.119220] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03 [ 0.119229] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff] [ 0.119258] pci 0000:00:02.0: supports D1 D2 [ 0.119261] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.119264] pci 0000:00:02.0: PME# disabled [ 0.119278] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03 [ 0.119288] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff] [ 0.119322] pci 0000:00:02.1: supports D1 D2 [ 0.119325] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.119328] pci 0000:00:02.1: PME# disabled [ 0.119347] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604 [ 0.119385] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403 [ 0.119396] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff] [ 0.119430] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.119433] pci 0000:00:05.0: PME# disabled [ 0.119452] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101 [ 0.119474] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f] [ 0.119503] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680 [ 0.119513] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.119518] pci 0000:00:07.0: reg 14: [io 0xec00-0xec07] [ 0.119544] pci 0000:00:07.0: supports D1 D2 [ 0.119546] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.119551] pci 0000:00:07.0: PME# disabled [ 0.119564] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101 [ 0.119573] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7] [ 0.119578] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.119583] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977] [ 0.119588] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73] [ 0.119592] pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f] [ 0.119597] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff] [ 0.119629] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604 [ 0.119650] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.119653] pci 0000:00:09.0: PME# disabled [ 0.119677] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.119696] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.119712] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.119729] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.119779] pci 0000:01:05.0: [11c1:5811] type 0 class 0x000c00 [ 0.119791] pci 0000:01:05.0: reg 10: [mem 0xfdeff000-0xfdefffff] [ 0.119836] pci 0000:01:05.0: supports D1 D2 [ 0.119839] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot [ 0.119843] pci 0000:01:05.0: PME# disabled [ 0.119862] pci 0000:01:0a.0: [4444:0016] type 0 class 0x000400 [ 0.119875] pci 0000:01:0a.0: reg 10: [mem 0xf4000000-0xf7ffffff pref] [ 0.119945] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.119949] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff] [ 0.119952] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.119956] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xf7ffffff pref] [ 0.119960] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.119963] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.119966] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.119969] pci 0000:00:04.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.119972] pci 0000:00:04.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 0.120007] pci 0000:02:00.0: [10de:06e2] type 0 class 0x000300 [ 0.120017] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.120026] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.120036] pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit] [ 0.120043] pci 0000:02:00.0: reg 24: [io 0xbc00-0xbc7f] [ 0.120049] pci 0000:02:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref] [ 0.122011] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.122015] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff] [ 0.122018] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.122022] pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.122031] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.122217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.148113] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.148185] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.148258] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 *7 9 10 11 14 15) [ 0.148329] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 *7 9 10 11 14 15) [ 0.148398] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.148469] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.148541] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.148614] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 *10 11 14 15) [ 0.148683] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.148755] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.148827] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 0.148908] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 0.148980] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.149057] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.149130] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15) [ 0.149207] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.149283] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.149356] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) [ 0.149432] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.149561] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.149686] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.149810] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.149933] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.150064] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.150189] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.150314] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.150438] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0 [ 0.150562] ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0, disabled. [ 0.150686] ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0 [ 0.150811] ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0 [ 0.150935] ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled. [ 0.151066] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0 [ 0.151190] ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0 [ 0.151315] ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0 [ 0.151441] ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled. [ 0.151566] ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled. [ 0.151691] ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0 [ 0.151815] ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0, disabled. [ 0.151847] HEST: Table is not found! [ 0.152112] SCSI subsystem initialized [ 0.152133] libata version 3.00 loaded. [ 0.152166] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.152168] vgaarb: loaded [ 0.152205] usbcore: registered new interface driver usbfs [ 0.152228] usbcore: registered new interface driver hub [ 0.152236] usbcore: registered new device driver usb [ 0.152236] PCI: Using ACPI for IRQ routing [ 0.152236] PCI: pci_cache_line_size set to 64 bytes [ 0.152236] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.152236] reserve RAM buffer: 000000007fef0000 - 000000007fffffff [ 0.152236] NetLabel: Initializing [ 0.152236] NetLabel: domain hash size = 128 [ 0.152236] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.152244] NetLabel: unlabeled traffic allowed by default [ 0.152250] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.152257] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.152262] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.156035] Switching to clocksource hpet [ 0.157478] AppArmor: AppArmor Filesystem Enabled [ 0.157495] pnp: PnP ACPI init [ 0.157525] ACPI: bus type pnp registered [ 0.157749] pnp 00:00: [bus 00-ff] [ 0.157752] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.157755] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.157758] pnp 00:00: [io 0x0d00-0xffff window] [ 0.157761] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.157763] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.157766] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.157866] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.157902] pnp 00:01: [io 0x1000-0x107f] [ 0.157905] pnp 00:01: [io 0x1080-0x10ff] [ 0.157907] pnp 00:01: [io 0x1400-0x147f] [ 0.157909] pnp 00:01: [io 0x1480-0x14ff] [ 0.157912] pnp 00:01: [io 0x1800-0x187f] [ 0.157914] pnp 00:01: [io 0x1880-0x18ff] [ 0.157985] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.158078] pnp 00:02: [io 0x0010-0x001f] [ 0.158081] pnp 00:02: [io 0x0022-0x003f] [ 0.158083] pnp 00:02: [io 0x0044-0x005f] [ 0.158085] pnp 00:02: [io 0x0062-0x0063] [ 0.158090] pnp 00:02: [io 0x0065-0x006f] [ 0.158092] pnp 00:02: [io 0x0074-0x007f] [ 0.158094] pnp 00:02: [io 0x0091-0x0093] [ 0.158097] pnp 00:02: [io 0x00a2-0x00bf] [ 0.158099] pnp 00:02: [io 0x00e0-0x00ef] [ 0.158102] pnp 00:02: [io 0x04d0-0x04d1] [ 0.158104] pnp 00:02: [io 0x0290-0x029f] [ 0.158165] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.158181] pnp 00:03: [dma 4] [ 0.158183] pnp 00:03: [io 0x0000-0x000f] [ 0.158186] pnp 00:03: [io 0x0080-0x0090] [ 0.158188] pnp 00:03: [io 0x0094-0x009f] [ 0.158191] pnp 00:03: [io 0x00c0-0x00df] [ 0.158232] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.158311] pnp 00:04: [irq 0 disabled] [ 0.158329] pnp 00:04: [irq 8] [ 0.158332] pnp 00:04: [mem 0xfefff000-0xfefff3ff] [ 0.158372] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.158415] pnp 00:05: [io 0x0070-0x0073] [ 0.158456] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.158469] pnp 00:06: [io 0x0061] [ 0.158509] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.158521] pnp 00:07: [io 0x00f0-0x00ff] [ 0.158530] pnp 00:07: [irq 13] [ 0.158569] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.158674] pnp 00:08: [io 0x0060] [ 0.158676] pnp 00:08: [io 0x0064] [ 0.158685] pnp 00:08: [irq 12] [ 0.158728] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.159708] pnp 00:09: [mem 0xf0000000-0xf3ffffff] [ 0.159784] pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.159870] pnp 00:0a: [mem 0xfefff000-0xfefff0ff] [ 0.159873] pnp 00:0a: [mem 0xffff0000-0xffffffff] [ 0.159876] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.159878] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.159881] pnp 00:0a: [mem 0xfee00000-0xfeefffff] [ 0.159884] pnp 00:0a: [mem 0xfefff000-0xfeffffff] [ 0.159886] pnp 00:0a: [mem 0xfff80000-0xfff80fff] [ 0.159889] pnp 00:0a: [mem 0xfff90000-0xfffbffff] [ 0.159892] pnp 00:0a: [mem 0xfffed000-0xfffeffff] [ 0.159969] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.159982] pnp: PnP ACPI: found 11 devices [ 0.159984] ACPI: ACPI bus type pnp unregistered [ 0.159998] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.160011] system 00:01: [io 0x1080-0x10ff] has been reserved [ 0.160015] system 00:01: [io 0x1400-0x147f] has been reserved [ 0.160018] system 00:01: [io 0x1480-0x14ff] has been reserved [ 0.160021] system 00:01: [io 0x1800-0x187f] has been reserved [ 0.160024] system 00:01: [io 0x1880-0x18ff] has been reserved [ 0.160031] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.160035] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.160043] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.160052] system 00:0a: [mem 0xfefff000-0xfefff0ff] has been reserved [ 0.160055] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved [ 0.160059] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.160062] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.160066] system 00:0a: [mem 0xfefff000-0xfeffffff] could not be reserved [ 0.160069] system 00:0a: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.160073] system 00:0a: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.160076] system 00:0a: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.197180] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.197184] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff] [ 0.197188] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.197192] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xf7ffffff pref] [ 0.197197] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.197199] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff] [ 0.197203] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.197206] pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.197217] pci 0000:00:04.0: setting latency timer to 64 [ 0.197222] pci 0000:00:09.0: setting latency timer to 64 [ 0.197225] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.197228] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.197231] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.197233] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.197236] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff] [ 0.197239] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.197242] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.197245] pci_bus 0000:01: resource 2 [mem 0xf4000000-0xf7ffffff pref] [ 0.197248] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.197250] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.197253] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.197256] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff] [ 0.197258] pci_bus 0000:01: resource 8 [mem 0x80000000-0xfebfffff] [ 0.197261] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.197264] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.197267] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.197349] NET: Registered protocol family 2 [ 0.197440] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.197798] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.198533] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.198892] TCP: Hash tables configured (established 131072 bind 65536) [ 0.198895] TCP reno registered [ 0.198899] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.198914] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.199097] NET: Registered protocol family 1 [ 0.213332] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.213383] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.213442] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.213499] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.213561] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.213585] pci 0000:02:00.0: Boot video device [ 0.213588] PCI: CLS 32 bytes, default 64 [ 0.213648] Unpacking initramfs... [ 0.487716] Freeing initrd memory: 10740k freed [ 0.495402] audit: initializing netlink socket (disabled) [ 0.495418] type=2000 audit(1315318691.494:1): initialized [ 0.508060] highmem bounce pool size: 64 pages [ 0.508066] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.508396] VFS: Disk quotas dquot_6.5.2 [ 0.508439] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.508640] msgmni has been set to 414 [ 0.508929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.508967] io scheduler noop registered [ 0.508970] io scheduler deadline registered [ 0.509013] io scheduler cfq registered (default) [ 0.509850] vesafb: framebuffer at 0xf9000000, mapped to 0xf7a80000, using 5120k, total 14336k [ 0.509853] vesafb: mode is 1280x1024x16, linelength=2560, pages=1 [ 0.509855] vesafb: protected mode interface info at c000:c300 [ 0.509857] vesafb: pmi: set display start = c00cc363, set palette = c00cc3be [ 0.509859] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 0.509873] vesafb: scrolling: redraw [ 0.509876] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.510545] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.510550] bootsplash: silentjpeg size 245922 bytes [ 0.544186] bootsplash: ...found (1280x1024, 255920 bytes, v3). [ 0.617797] Console: switching to colour frame buffer device 156x60 [ 0.690224] fb0: VESA VGA frame buffer device [ 0.690290] ERST: Table is not found! [ 0.690674] Non-volatile memory driver v1.3 [ 0.690677] Linux agpgart interface v0.103 [ 0.691821] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.801332] Fixed MDIO Bus: probed [ 0.801339] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.801637] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 [ 0.801655] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23 [ 0.801676] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.801679] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.801705] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.809042] ehci_hcd 0000:00:02.1: debug port 1 [ 0.809049] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported [ 0.809072] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 [ 0.815020] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.815048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.815051] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.815054] usb usb1: Product: EHCI Host Controller [ 0.815056] usb usb1: Manufacturer: Linux 2.6.37.6-0.7-desktop ehci_hcd [ 0.815059] usb usb1: SerialNumber: 0000:00:02.1 [ 0.815209] hub 1-0:1.0: USB hub found [ 0.815214] hub 1-0:1.0: 10 ports detected [ 0.815326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.815579] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 0.815589] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22 [ 0.815600] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.815603] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.815615] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.823036] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000 [ 0.876039] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.876042] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.876044] usb usb2: Product: OHCI Host Controller [ 0.876047] usb usb2: Manufacturer: Linux 2.6.37.6-0.7-desktop ohci_hcd [ 0.876049] usb usb2: SerialNumber: 0000:00:02.0 [ 0.876153] hub 2-0:1.0: USB hub found [ 0.876158] hub 2-0:1.0: 10 ports detected [ 0.876255] uhci_hcd: USB Universal Host Controller Interface driver [ 0.876295] Initializing USB Mass Storage driver... [ 0.876325] usbcore: registered new interface driver usb-storage [ 0.876326] USB Mass Storage support registered. [ 0.876340] usbcore: registered new interface driver ums-alauda [ 0.876353] usbcore: registered new interface driver ums-cypress [ 0.876368] usbcore: registered new interface driver ums-datafab [ 0.876381] usbcore: registered new interface driver ums-freecom [ 0.876394] usbcore: registered new interface driver ums-isd200 [ 0.876408] usbcore: registered new interface driver ums-jumpshot [ 0.876421] usbcore: registered new interface driver ums-karma [ 0.876434] usbcore: registered new interface driver ums-onetouch [ 0.876448] usbcore: registered new interface driver ums-sddr09 [ 0.876462] usbcore: registered new interface driver ums-sddr55 [ 0.876475] usbcore: registered new interface driver ums-usbat [ 0.876523] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 [ 0.876525] PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 0.876965] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.876972] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.877091] mice: PS/2 mouse device common for all mice [ 0.877225] rtc_cmos 00:05: RTC can wake from S4 [ 0.880069] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.880109] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.880121] cpuidle: using governor ladder [ 0.880124] cpuidle: using governor menu [ 0.880499] usbcore: registered new interface driver usbhid [ 0.880502] usbhid: USB HID core driver [ 0.880768] TCP cubic registered [ 0.880859] NET: Registered protocol family 10 [ 0.881257] lo: Disabled Privacy Extensions [ 0.881486] lib80211: common routines for IEEE802.11 drivers [ 0.881488] lib80211_crypt: registered algorithm 'NULL' [ 0.881491] Registering the dns_resolver key type [ 0.881553] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5) [ 0.881570] Using IPI No-Shortcut mode [ 0.881688] PM: Checking hibernation image partition /dev/disk/by-id/ata- SAMSUNG_HD501LJ_S10NJDWQ321600-part5 [ 0.985570] PM: Hibernation image not present or could not be loaded. [ 0.985587] registered taskstats version 1 [ 0.985804] Magic number: 11:224:333 [ 0.985820] tty tty54: hash matches [ 0.985910] rtc_cmos 00:05: setting system clock to 2011-09-06 14:18:12 UTC (1315318692) [ 0.986016] Freeing unused kernel memory: 452k freed [ 0.986316] Write protecting the kernel text: 4704k [ 0.986402] Write protecting the kernel read-only data: 3188k [ 1.026576] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20101013/nspredef-1059) [ 1.026586] ACPI: Expecting a [Reference] package element, found type 0 [ 1.026598] ACPI: Invalid passive threshold [ 1.026832] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.026838] ACPI: Thermal Zone [THRM] (40 C) [ 1.032635] sata_nv 0000:00:08.0: version 3.5 [ 1.032856] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 1.032873] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 1.032931] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.033265] scsi0 : sata_nv [ 1.033394] scsi1 : sata_nv [ 1.033544] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20 [ 1.033548] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20 [ 1.270031] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 1.384349] usb 1-4: New USB device found, idVendor=0424, idProduct=2504 [ 1.384352] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.384630] hub 1-4:1.0: USB hub found [ 1.384719] hub 1-4:1.0: 2 ports detected [ 1.487022] usb 1-10: new high speed USB device using ehci_hcd and address 5 [ 1.487046] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.490129] ata1.00: ATAPI: TSSTcorp CDDVDW TS-H653N, 0409, max UDMA/33 [ 1.496123] ata1.00: configured for UDMA/33 [ 1.497446] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653N 0409 PQ: 0 ANSI: 5 [ 1.619847] usb 1-10: New USB device found, idVendor=0bda, idProduct=0111 [ 1.619850] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.619853] usb 1-10: Product: USB2.0-CRW [ 1.619855] usb 1-10: Manufacturer: Generic [ 1.619858] usb 1-10: SerialNumber: 20021111153705700 [ 1.621606] scsi2 : usb-storage 1-10:1.0 [ 1.882026] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 1.951046] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.970126] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 1.970129] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.973121] ata2.00: configured for UDMA/133 [ 1.973244] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 1.973391] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.973453] sd 1:0:0:0: [sda] Write Protect is off [ 1.973456] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.973510] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.032925] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 2.033416] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.037705] pata_amd 0000:00:06.0: version 0.4.1 [ 2.037763] pata_amd 0000:00:06.0: setting latency timer to 64 [ 2.038192] scsi3 : pata_amd [ 2.038274] scsi4 : pata_amd [ 2.038869] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 2.038872] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 2.075039] usb 2-2: New USB device found, idVendor=045e, idProduct=00f1 [ 2.075043] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.075046] usb 2-2: Product: Microsoft Wireless Desktop Receiver 3.1A [ 2.075048] usb 2-2: Manufacturer: Microsft [ 2.089086] input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input0 [ 2.089169] generic-usb 0003:045E:00F1.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:02.0-2/input0 [ 2.122198] input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input1 [ 2.122309] generic-usb 0003:045E:00F1.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:02.0-2/input1 [ 2.211063] ata4: port disabled. ignoring. [ 2.221038] ACPI: acpi_idle registered with cpuidle [ 2.223792] ACPI: Fan [FAN] (on) [ 2.230425] udev[110]: starting version 166 [ 2.383041] usb 2-3: new full speed USB device using ohci_hcd and address 3 [ 2.572044] usb 2-3: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32 [ 2.572049] usb 2-3: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32 [ 2.584037] usb 2-3: New USB device found, idVendor=1784, idProduct=0006 [ 2.584041] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.584044] usb 2-3: Product: eHome Infrared Transceiver [ 2.584046] usb 2-3: Manufacturer: TopSeed Technology Corp. [ 2.584048] usb 2-3: SerialNumber: TS0044QX [ 2.627761] scsi 2:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 2.635272] scsi 2:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 2.636372] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 2.644025] scsi 2:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 2.652380] scsi 2:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 2.657286] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 2.658125] sd 2:0:0:3: [sde] Attached SCSI removable disk [ 2.658988] sd 2:0:0:2: [sdd] Attached SCSI removable disk [ 2.891960] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 2.891966] PM: Basic memory bitmaps created [ 2.909592] PM: Basic memory bitmaps freed [ 2.928227] PM: Starting manual resume from disk [ 2.928231] PM: Hibernation image partition 8:5 present [ 2.928233] PM: Looking for hibernation image. [ 2.928467] PM: Image not found (code -22) [ 2.928472] PM: Hibernation image not present or could not be loaded. [ 3.040360] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 3.151020] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr [ 4.424278] preloadtrace: systemtap: 1.4/0.149, base: f816c000, memory: 30data/39text/13ctx/13net/282alloc kb, probes: 34 [ 5.004599] udev[416]: starting version 166 [ 5.128917] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 5.128982] ACPI: Power Button [PWRB] [ 5.130188] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 5.130232] ACPI: Power Button [PWRF] [ 5.153906] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 5.153938] i2c i2c-1: nForce2 SMBus adapter at 0x1c40 [ 5.494042] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 5.617310] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 5.617329] firewire_ohci 0000:01:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 5.668083] firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 [ 5.694017] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 5.694279] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 5.694285] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 5.694290] forcedeth 0000:00:07.0: setting latency timer to 64 [ 5.739576] Linux video capture interface: v2.00 [ 5.845187] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 5.852422] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.868798] ivtv: Start initialization, version 1.4.2 [ 5.868986] ivtv0: Initializing card 0 [ 5.868990] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 5.869359] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 5.869376] ivtv 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 5.869386] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 5.870284] ivtv i2c driver #0: Test OK [ 5.910194] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 5.910276] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.911328] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 5.912263] sd 2:0:0:1: Attached scsi generic sg3 type 0 [ 5.912356] sd 2:0:0:2: Attached scsi generic sg4 type 0 [ 5.912439] sd 2:0:0:3: Attached scsi generic sg5 type 0 [ 5.922921] tveeprom 2-0050: Hauppauge model 25012, rev C5A3, serial# 10600309 [ 5.922924] tveeprom 2-0050: tuner model is TCL MFNM05-4 (idx 103, type 43) [ 5.922928] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) [ 5.922930] tveeprom 2-0050: audio processor is CX25843 (idx 37) [ 5.922933] tveeprom 2-0050: decoder processor is CX25843 (idx 30) [ 5.922935] tveeprom 2-0050: has radio [ 5.922938] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 5.928322] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.928329] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.928955] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 6.076537] cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) [ 6.169134] firewire_core: created device fw0: GUID 001e8c00012d5aee, S400 [ 6.171191] IR NEC protocol handler initialized [ 6.209966] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 13, addr 00:1f:c6:5f:2c:6c [ 6.209971] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 6.210174] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.212602] IR RC5(x) protocol handler initialized [ 6.232035] Registered IR keymap rc-rc6-mce [ 6.232222] input: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/rc/rc0/input5 [ 6.232296] rc0: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/rc/rc0 [ 6.232320] mceusb 2-3:1.0: Registered TopSeed Technology Corp. eHome Infrared Transceiver on usb2:3 [ 6.232345] usbcore: registered new interface driver mceusb [ 6.369885] IR RC6 protocol handler initialized [ 6.553959] tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 6.614890] IR JVC protocol handler initialized [ 6.654902] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 6.654911] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 6.654915] hda_intel: Disabling MSI [ 6.654955] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 6.662063] ALSA hda_intel.c:1450: Enable delay in RIRB handling [ 6.687706] usbcore: registered new interface driver hdj_mod [ 6.742350] IR Sony protocol handler initialized [ 6.826698] tda9887 2-0043: creating new instance [ 6.826703] tda9887 2-0043: tda988[5/6/7] found [ 6.829022] lirc_dev: IR Remote Control driver registered, major 250 [ 6.830358] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 6.842912] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 [ 6.842917] IR LIRC bridge handler initialized [ 6.856873] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 6.997881] tuner-simple 2-0061: creating new instance [ 6.997887] tuner-simple 2-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) [ 7.000445] ivtv0: Registered device video0 for encoder MPG (4096 kB) [ 7.000481] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 7.000514] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) [ 7.000549] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 7.000586] ivtv0: Registered device radio0 for encoder radio [ 7.000589] ivtv0: Initialized card: Hauppauge WinTV PVR-150 [ 7.000643] ivtv: End initialization [ 7.031024] hda_codec: ALC1200: SKU not ready 0x411111f0 [ 7.132311] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input6 [ 7.246234] nvidia: module license 'NVIDIA' taints kernel. [ 7.246239] Disabling lock debugging due to kernel taint [ 7.974769] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 8.174140] ivtv0: Encoder revision: 0x02060039 [ 8.712420] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 8.712439] nvidia 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 8.712449] nvidia 0000:02:00.0: setting latency timer to 64 [ 8.712455] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 8.713165] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011 [ 11.657081] cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 13.234347] Adding 2107388k swap on /dev/sda5. Priority:-1 extents:1 across:2107388k [ 15.424372] device-mapper: uevent: version 1.0.3 [ 15.424597] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 20.632084] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 20.960452] fuse init (API version 7.15) [ 23.029949] type=1400 audit(1315329514.542:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=976 comm="apparmor_parser" [ 23.090929] type=1400 audit(1315329514.603:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=981 comm="apparmor_parser" [ 23.233818] type=1400 audit(1315329514.746:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=985 comm="apparmor_parser" [ 23.368679] type=1400 audit(1315329514.881:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=989 comm="apparmor_parser" [ 23.938399] type=1400 audit(1315329515.451:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=994 comm="apparmor_parser" [ 23.938536] type=1400 audit(1315329515.451:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm- prefork/apache2//DEFAULT_URI" pid=994 comm="apparmor_parser" [ 23.938615] type=1400 audit(1315329515.451:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm- prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=994 comm="apparmor_parser" [ 23.938761] type=1400 audit(1315329515.451:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm- prefork/apache2//phpsysinfo" pid=994 comm="apparmor_parser" [ 24.076307] type=1400 audit(1315329515.589:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=998 comm="apparmor_parser" [ 24.230982] type=1400 audit(1315329515.743:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/dovecot-auth" pid=1002 comm="apparmor_parser" [ 26.402920] powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 4050e (2 cpu cores) (version 2.20.00) [ 26.402984] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xe [ 26.402987] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xf [ 26.402989] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x11 [ 26.402992] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x16 [ 27.001016] Clocksource tsc unstable (delta = -173581073 ns) [ 29.107509] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 29.157547] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 29.184367] ip_tables: (C) 2000-2006 Netfilter Core Team [ 29.782871] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 31.855762] forcedeth 0000:00:07.0: irq 40 for MSI/MSI-X [ 31.951469] NET: Registered protocol family 17 [ 42.866020] eth0: no IPv6 routers present [ 49.456510] start_kdeinit (3286): /proc/3286/oom_adj is deprecated, please use /proc/3286/oom_score_adj instead. [ 51.580372] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr,commit=0 [ 51.678513] EXT4-fs (sda7): re-mounted. Opts: acl,user_xattr,commit=0 [ 55.181733] bootsplash: status on console 0 changed to on -- Un saludo. Ric -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org

On Mar 06 Sep 2011 17:01:14 Alfredo Jesús Delaiti escribió:

Hola

Bueno es reconocida la placa, sigo debajo

El 06/09/11 14:25, Ric escribió:

...

...

...

Alfredo, la tarjeta es WinTV PVR 150, de Hauppage. Si sirve, copio la

http://www.hauppauge.com/site/support/support_pvr150.html http://www.mythtv.org/wiki/Hauppauge_PVR-150 http://www.mythtv.org/wiki/Opensuse_10.2#IVTV.2C_the_analogue_TV_card

[ 5.739576] Linux video capture interface: v2.00

[ 5.868798] ivtv: Start initialization, version 1.4.2 [ 5.868986] ivtv0: Initializing card 0 [ 5.868990] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 5.869359] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 5.869376] ivtv 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 5.869386] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 5.870284] ivtv i2c driver #0: Test OK

[ 5.922921] tveeprom 2-0050: Hauppauge model 25012, rev C5A3, serial# 10600309 [ 5.922924] tveeprom 2-0050: tuner model is TCL MFNM05-4 (idx 103, type 43) [ 5.922928] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) [ 5.922930] tveeprom 2-0050: audio processor is CX25843 (idx 37) [ 5.922933] tveeprom 2-0050: decoder processor is CX25843 (idx 30) [ 5.922935] tveeprom 2-0050: has radio [ 5.922938] ivtv0: Autodetected Hauppauge WinTV PVR-150

[ 6.076537] cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) [ 6.169134] firewire_core: created device fw0: GUID 001e8c00012d5aee, S400 [ 6.171191] IR NEC protocol handler initialized [ 6.209966] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 13, addr 00:1f:c6:5f:2c:6c [ 6.209971] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 6.210174] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.212602] IR RC5(x) protocol handler initialized [ 6.232035] Registered IR keymap rc-rc6-mce

[ 6.654915] hda_intel: Disabling MSI [ 6.654955] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 6.662063] ALSA hda_intel.c:1450: Enable delay in RIRB handling [ 6.687706] usbcore: registered new interface driver hdj_mod [ 6.742350] IR Sony protocol handler initialized [ 6.826698] tda9887 2-0043: creating new instance [ 6.826703] tda9887 2-0043: tda988[5/6/7] found [ 6.829022] lirc_dev: IR Remote Control driver registered, major 250 [ 6.830358] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 6.842912] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 [ 6.842917] IR LIRC bridge handler initialized [ 6.856873] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 6.997881] tuner-simple 2-0061: creating new instance [ 6.997887] tuner-simple 2-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) [ 7.000445] ivtv0: Registered device video0 for encoder MPG (4096 kB) [ 7.000481] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 7.000514] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) [ 7.000549] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 7.000586] ivtv0: Registered device radio0 for encoder radio [ 7.000589] ivtv0: Initialized card: Hauppauge WinTV PVR-150

Por acá puede estar la solución.

prueba con xawtv -hwscan

te va a dar algo parecido a esto (es lo que a mi me da):

alfredo@linux:~> xawtv -hwscan This is xawtv-3.95, running on Linux/x86_64 (3.0.3-2-desktop) looking for available devices port 63-78 type : Xvideo, image scaler name : Radeon Textured Video

/dev/video0: OK [ -device /dev/video0 ] type : v4l2 name : USB2.0 Camera flags: capture

/dev/video1: OK [ -device /dev/video1 ] type : v4l2 name : Geniatech/Mygica X8507 / Visus flags: capture tuner

/dev/video2: OK [ -device /dev/video2 ] type : v4l2 name : LifeView FlyVIDEO3000 flags: overlay capture tuner

en tu caso es muy probable que de /dev/video0, /dev/video32 y /dev/video24 Luego en una consola ejecuta xawtv -c /dev/video0 y cambia de canal y ajusta el programa a la norma de tv de tu país, luego prueba con xawtv -c /dev/video32 y xawtv -c /dev/video24. Cuando uses XawTV prueba con "overlay" y "grabdisplay" en la sección "Capture" Te estoy pidiendo usar XawTV porque tiene menos cosa que configurar que TVTime.

...

[ 7.000643] ivtv: End initialization [ 7.031024] hda_codec: ALC1200: SKU not ready 0x411111f0 [ 7.132311] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input6 [ 7.246234] nvidia: module license 'NVIDIA' taints kernel. [ 7.246239] Disabling lock debugging due to kernel taint [ 7.974769] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 8.174140] ivtv0: Encoder revision: 0x02060039 [ 8.712420] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 8.712439] nvidia 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 8.712449] nvidia 0000:02:00.0: setting latency timer to 64 [ 8.712455] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 8.713165] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011 [ 11.657081] cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)

¿Probaste la placa en otra PC o con Windows? Comprueba que tienes instalado todos los controladores ivtv. Utiliza YaST para ello.

Suerte,

Alfredo

Te pego la salida de los comandos: ric@linux-x9xa:~> xawtv -hwscan This is xawtv-3.95, running on Linux/i686 (2.6.37.6-0.7-desktop) looking for available devices port 310-341 type : Xvideo, image scaler name : NV17 Video Texture /dev/video0: OK [ -device /dev/video0 ] type : v4l2 name : Hauppauge WinTV PVR-150 flags: capture tuner ric@linux-x9xa:~> xawtv -c /dev/video0 This is xawtv-3.95, running on Linux/i686 (2.6.37.6-0.7-desktop) xinerama 0: 1680x1050+0+0 WARNING: No DGA direct video mode for this display. /dev/video0 [v4l2]: no overlay support v4l-conf had some trouble, trying to continue anyway config: invalid value for input: Television valid choices for "input": "Tuner 1", "S-Video 1", "Composite 1", "S-Video 2", "Composite 2" no way to get: 384x288 32 bit TrueColor (LE: bgr-) no way to get: 128x96 32 bit TrueColor (LE: bgr-) no way to get: 384x288 32 bit TrueColor (LE: bgr-) no way to get: 128x96 32 bit TrueColor (LE: bgr-) Y así se repite unas cuantas veces, pero sigo sin ver nada....Intente cambiar de canal, pero nada... La placa funciona, ya que en en este mismo equipo está instalado un Win 7 y allí si funciona. Los controladores ivtv están todos instalados... -- Un saludo. Ric -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org

On Lunes 12 septiembre 2011 14:09:42 Alfredo Jesús Delaiti escribió:

Hola

El 12/09/11 04:27, francisco f escribió:

...

Ja Ja Ayer me instalae la 11.4 x64 en casa y tachannnnn me pasa lo mismoooo

con una Avermedia 98. La reconoce, la configura, pero no funciona. Y ya no me dio tiempo a mirar mas. Por cierto prueba a desactivar el Apparmor, se me ocurre ahora

Si necesitas ayuda inicia un nuevo tema con el asunto, por ejemplo Avermedia 98 no funciona con OpenSuSE 11.4. Con esto si te podemos ayudar no se mezclan los temas.

No por el momento. Era solo para decir que puede que el problema este en otro sitio, porque que pase con dos tarjetas lo mismo ya es mas raro. En mi caso da un error con v4l y el audio que no lo encuentra. Revisando un poco encontre un fallo posiblemente parecido en versiones 10.x pero las soluciones no funcionan. Y en ese punto ya me canse y me fui a dormir. -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org

On Lunes 12 septiembre 2011 15:10:32 Ric escribió:

On Lunes, 12 de Septiembre de 2011 04:27:12 francisco f escribió:

...

Ja Ja

Ayer me instalae la 11.4 x64 en casa y tachannnnn me pasa lo mismoooo

con una Avermedia 98. La reconoce, la configura, pero no funciona. Y ya no me dio tiempo a mirar mas. Por cierto prueba a desactivar el Apparmor, se me ocurre ahora

Probé desactivando Apparmor y tampoco funcionó. A vos?

No, tampoco sirvio para nada -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org