buenos dias, en un suse 7.3 desde las 6 estoy liao y no se que mas hacer. resulta que me da bash-2.05# df -kh Filesystem Size Used Avail Use% Mounted on shmfs 2.2G 0 2.1G 0% /dev/shm deberian salirme algo parecido a esto Filesystem Size Used Avail Use% Mounted on /dev/sda3 10G 5.4G 4.6G 54% / /dev/sda1 23M 4.7M 16M 22% /boot /dev/sda5 10G 2.7G 7.3G 27% /home shmfs 2.2G 0 2.1G 0% /dev/shm Cuando intento editar un fichero, me da el error "Write error in swap file" el fstab bash-2.05# cat /etc/fstab /dev/hda2 swap swap defaults 0 0 /dev/hda3 / reiserfs defaults 1 1 /dev/hda1 /boot ext2 defaults 1 2 /dev/hdc /media/cdrom auto ro,noauto,user,exec 0 0 /dev/fd0 /media/floppy auto noauto,user 0 0 proc /proc proc defaults 0 0 y cuando monto una particion /dev/hda2 me dice que bash-2.05# mount /dev/hda2 mount: el tipo de sistema de archivos swap no estß soportado por el kernel bash-2.05# mount /dev/hda3 mount: /dev/hda3 ya estß montado o / estß ocupado he reiniciado, con sistema de rescate y nada. he vuelto a reiniciar y nada. Tengo miedo de perder lo que tengo, o ya es demasiado tarde? se os ocurre algo? gracias -- Usuario Linux número 396108
adjunto boot.msg por si os sirve de algo Inspecting /boot/System.map-2.4.4-4GB Loaded 10917 symbols from /boot/System.map-2.4.4-4GB. Symbols match kernel version 2.4.4. Loaded 5 symbols from 1 module. klogd 1.3-3, log source = ksyslog started. <4>Linux version 2.4.4-4GB (root@Pentium.suse.de) (gcc version 2.95.320010315 (SuSE)) #1 Fri May 18 14:11:12 GMT 2001 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) <4> BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) <4> BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <4>Scan SMP from c0000000 for 1024 bytes. <4>Scan SMP from c009fc00 for 1024 bytes. <4>Scan SMP from c00f0000 for 65536 bytes. <4>Scan SMP from c0000000 for 4096 bytes. <4>On node 0 totalpages: 65520 <4>zone(0): 4096 pages. <4>zone(1): 61424 pages. <4>zone(2): 0 pages. <4>mapped APIC to ffffe000 (01442000) <4>Kernel command line: auto BOOT_IMAGE=linux ro root=303 BOOT_FILE=/boot/vmlinuz vga=0x0303 apm=off <6>Initializing CPU#0 <4>Detected 801.433 MHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 1599.07 BogoMIPS <4>Memory: 254260k/262080k available (1225k kernel code, 7436k reserved, 933k data, 112k init, 0k highmem) <4>Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) <4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) <4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) <5>VFS: Diskquotas version dquot_6.5.0 initialized <7>CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2 <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 64K (64 bytes/line) <7>CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000 <7>CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 <7>CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 <4>CPU: AMD Duron(tm) processor stepping 01 <6>Enabling fast FPU save and restore... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <4>PCI: PCI BIOS revision 2.10 entry at 0xfb360, last bus=1 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <3>Unknown bridge resource 2: assuming transparent <6>PCI: Using IRQ router VIA [1106/0686] at 00:07.0 <6>Applying VIA PCI latency patch. <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) <5>apm: disabled on user request. <4>Starting kswapd v1.8 <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <6>Detected PS/2 Mouse Port. <4>pty: 256 Unix98 ptys configured <4>block: queued sectors max/low 168850kB/56283kB, 512 slots per queue <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>VP_IDE: IDE controller on PCI bus 00 dev 39 <4>VP_IDE: chipset revision 6 <4>VP_IDE: not 100%% native mode: will probe irqs later <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 <4> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA <4> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio <4>hda: ST340810A, ATA DISK drive <4>hdb: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63 <4>hdb: ATAPI 52X CD-ROM drive, 128kB Cache doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda1 on /boot type ext2 (rw) doneActivating remaining swap-devices in /etc/fstab... doneSetting up the CMOS clockdone Setting up timezone datadone Setting up loopback devicedone Setting up hostnamedone Mount SHM FS on /dev/shmdone Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A Configured serial ports doneRunning /etc/init.d/boot.local doneCreating /var/log/boot.msg doneEnabling syn flood protectiondone Disabling IP forwardingdone Boot logging started at Tue Feb 14 09:27:19 2006 Master Resource Control: previous runlevel: N, switching to runlevel: 3 Starting personal-firewall (initial) [not active]unused Initializing random number generatordone Setting up network device eth0 doneSetting up routing (using /etc/route.conf)done Starting RPC portmap daemondone Starting SSH daemondone Starting syslog servicesdone Starting lpddone Starting service usbmgr done Starting service at daemon:done Loading keymap qwerty/es.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Loading console font lat1-16.psfu doneSetting up console ttys doneStarting SAMBA nmbd :done Starting SAMBA smbd :done Starting CRON daemondone Starting kernel based NFS serverexportfs: can't open /var/lib/nfs/rmtab for reading exportfs: could not open /var/lib/nfs/xtab for locking exportfs: could not open /var/lib/nfs/etab for locking exportfs: can't lock /var/lib/nfs/etab for writing exportfs: could not open /var/lib/nfs/xtab for locking exportfs: can't lock /var/lib/nfs/xtab for writing startproc: exi -- Usuario Linux número 396108
Hola :) El Martes, 14 de Febrero de 2006 09:27, Pedro Maria Castellanos escribió:
buenos dias, en un suse 7.3 desde las 6 estoy liao y no se que mas hacer.
resulta que me da
bash-2.05# df -kh Filesystem Size Used Avail Use% Mounted on shmfs 2.2G 0 2.1G 0% /dev/shm
deberian salirme algo parecido a esto
Filesystem Size Used Avail Use% Mounted on /dev/sda3 10G 5.4G 4.6G 54% / /dev/sda1 23M 4.7M 16M 22% /boot /dev/sda5 10G 2.7G 7.3G 27% /home shmfs 2.2G 0 2.1G 0% /dev/shm
Cuando intento editar un fichero, me da el error
"Write error in swap file"
el fstab
bash-2.05# cat /etc/fstab /dev/hda2 swap swap defaults 0 0 /dev/hda3 / reiserfs defaults 1 1 /dev/hda1 /boot ext2 defaults 1 2
/dev/hdc /media/cdrom auto ro,noauto,user,exec 0 0
/dev/fd0 /media/floppy auto noauto,user 0 0
proc /proc proc defaults 0 0
y cuando monto una particion /dev/hda2 me dice que
bash-2.05# mount /dev/hda2 mount: el tipo de sistema de archivos swap no est� soportado por el kernel
Para montar una partición swap no usas mount, usas: swapon /dev/partición
bash-2.05# mount /dev/hda3 mount: /dev/hda3 ya est� montado o / est� ocupado
Puedes comprobar esto con el comando mount a secas o bien: cat /proc/mounts Puedes hacer un: mount -o remount,rw / Si esto te sigue fallando, puedes: 1.- arrancar desde un CD 2.- montar la / 3.- borrar el fichero: /punto_de_montaje/etc/mtab 4.- reiniciar
he reiniciado, con sistema de rescate y nada. he vuelto a reiniciar y nada. Tengo miedo de perder lo que tengo, o ya es demasiado tarde? se os ocurre algo?
¿Has probado con un LiveCD? El propio CD de SUSE puede actuar a modo de LiveCD o sino tienes Knoppix u otras distros. ¿Cuándo ha ocurrido? Y ¿qué estabas haciendo? HTH Rafa -- Rafa Grimán Systems Engineer Silicon Graphics Spain Santa Engracia, 120 - Planta Baja 28003 Madrid Spain Tel: +34 91 3984200 Tel: +34 91 3984201 Móvil: +34 628 117 940 http://www.sgi.com OpenWengo: rgriman Skype: rgriman
participants (2)
-
Pedro Maria Castellanos -
Rafa Grimán