[opensuse-es] Encontrado: Escáner nuevo con driver libre
Hola a todos. Hoy he recibido el esc�ner hp G2710 y he logrado hacerlo funcionar en 32 y 64 bits. Funciona con kooka. No soporta lineart Hay que bajarse el backend de souceforge, luego actualizar las fuentas, luego compilar e instalar. http://sourceforge.net/project/showfiles.php?group_id=150599 Estado de soporte: http:HP3900 Supporting status Posted Febrero 16th, 2007 by jkd hp3900-series Doc : Supporting status Author : Jonathan Bravo Lopez Revision: 13.02.2008 HP3900 driver supports some RTS8822 chipsets. But development is not completed so all involved scanners may have different supporting status. Next list shows current status of each known scanner: HP Scanjet 3800 Sensor: CCD Toshiba TCD2905 Chipset: RTS8822BL-03A (Hardware resolutions 150, 300, 600, 1200, 2400) Status: Resolutions: Supported resolutions lower than 1200dpi. 1200dpi doesn't finish and in 2400dpi header tries to go beyond the limit of area to scan Calibration: Shading: Implementing (not supported yet) Gamma : Emulated (Implemented but not used yet) Scan types: Reflective: Supported Slides : Supported Negatives : Supported Color modes: Color : Supported Gray : Supported (Emulation by driver is optional) Lineart: Emulated (not supported yet) HP Scanjet 3970 Sensor: CCD Toshiba TCD2952 Chipset: RTS8822L-01H (Hardware resolutions 100, 200, 300, 600, 1200, 2400) Status: Resolutions: All supported Calibration: Shading: Implementing (not supported yet) Gamma : Emulated (Implemented but not used yet) Scan types: Reflective: Supported Slides : Supported Negatives : Supported Color modes: Color : Supported Gray : Supported (Emulation by driver is optional) Lineart: Emulated (not supported yet) HP Scanjet 4070 Sensor: CCD Toshiba TCD2952 Chipset: RTS8822L-01H (Hardware resolutions 100, 200, 300, 600, 1200, 2400) Status: Resolutions: All supported Calibration: Shading: Implementing (not supported yet) Gamma : Emulated (Implemented but not used yet) Scan types: Reflective: Supported Slides : Supported Negatives : Supported Color modes: Color : Supported Gray : Supported (Emulation by driver is optional) Lineart: Emulated (not supported yet) HP Scanjet 4370 Sensor: CCD Toshiba TCD2958 Chipset: RTS8822L-02A (Hardware resolutions 150, 300, 600, 1200, 2400, 4800) Status: Resolutions: Supported ones lower than 1200. The others seem to have different line distances bettwen channel colors. Calibration: Shading: Implementing (not supported yet) Gamma : Emulated (Implemented but not used yet) Scan types: Reflective: Supported Slides : Supported Negatives : Supported Color modes: Color : Supported Gray : Supported (Emulation by driver is optional) Lineart: Emulated (not supported yet) HP Scanjet G2710 Sensor: CCD Toshiba TCD2905 Chipset: RTS8822BL-03A (Hardware resolutions 150, 300, 600, 1200, 2400) Status: Resolutions: Supported resolutions lower than 1200dpi. 1200dpi doesn't finish and in 2400dpi header tries to go beyond the limit of area to scan Calibration: Shading: Implementing (not supported yet) Gamma : Emulated (Implemented but not used yet) Scan types: Reflective: Supported Slides : Supported Negatives : Supported Color modes: Color : Supported Gray : Supported (Emulation by driver is optional) Lineart: Emulated (not supported yet) HP Scanjet G3010 Sensor: CCD Toshiba TCD2958 Chipset: RTS8822L-02A (Hardware resolutions 150, 300, 600, 1200, 2400, 4800) Status: Resolutions: Supported ones lower than 1200. The others seem to have different line distances bettwen channel colors. Calibration: Shading: Implementing (not supported yet) Gamma : Emulated (Implemented but not used yet) Scan types: Reflective: Supported Slides : Supported Negatives : Supported Color modes: Color : Supported Gray : Supported (Emulation by driver is optional) Lineart: Emulated (not supported yet) Umax Astra 4900/4950 Sensor: CIS Sony S575 Chipset: RTS8822L-01H (Hardware resolutions 100, 200, 300, 600, 1200) Status: Developing. There are problems setting up CIS sensor so retrieved image is not correct. [see note below] BenQ 5550T Sensor: CCD ? Chipset: RTS8823L-01E (Hardware resolutions 100, 150, 300, 600, 1200) Status: Developing... [see note below] Genius ColorPage HR7XE Sensor: ? Chipset: RTS882x? Status: This device is supposed to be managed by RTS882x chipset but I'vent got such scanner to make tests. [see note below] Note: Trying to support a scanner without device in my hands is a very slow process because I don't see scanner's behaviour in each change in the driver. It would be great if someone borrows me any of above listed devices marked as "developing" for few weeks to accelerate process. After supporting device, it would be returned to its owner. You can also contribute making a donation to buy scanners which can be supported by this driver.//www.jkdsoft.cjb.net/ -- Saludos. C�sar Enfr�ntate a los malos; enfr�ntate a los crueles; enfr�ntate a todos, menos a los tontos. Son demasiados y siempre ser�s derrotado. (Proverbio hind�) -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
El 2009-02-10 a las 18:33 +0100, César Alonso escribió:
Hola a todos.
Hoy he recibido el escáner hp G2710 y he logrado hacerlo funcionar en 32 y 64 bits. Funciona con kooka. No soporta lineart
Hay que bajarse el backend de souceforge, luego actualizar las fuentas, luego compilar e instalar.
http://sourceforge.net/project/showfiles.php?group_id=150599
Sería interesante que lo pusieras en la wiki (HCL/Scanner) para que la gente que lo tenga sepa por dónde empezar. Saludos, -- Camaleón -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
Camaleón escribió:
El 2009-02-10 a las 18:33 +0100, César Alonso escribió:
Hola a todos.
Hoy he recibido el escáner hp G2710 y he logrado hacerlo funcionar en 32 y 64 bits. Funciona con kooka. No soporta lineart
Hay que bajarse el backend de souceforge, luego actualizar las fuentas, luego compilar e instalar.
http://sourceforge.net/project/showfiles.php?group_id=150599
Sería interesante que lo pusieras en la wiki (HCL/Scanner) para que la gente que lo tenga sepa por dónde empezar.
Saludos,
Mañana me instalo la OpenSuSE 11.0 de 64 bits, haré un guíaburros y lo colgaré en el HCL. Por cierto, sí que funciona Lineart. -- Saludos. César Enfréntate a los malos; enfréntate a los crueles; enfréntate a todos, menos a los tontos. Son demasiados y siempre serás derrotado. (Proverbio hindú) -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
csalinux escribió:
Camaleón escribió:
El 2009-02-10 a las 18:33 +0100, César Alonso escribió:
Hola a todos.
Hoy he recibido el escáner hp G2710 y he logrado hacerlo funcionar en 32 y 64 bits. Funciona con kooka. No soporta lineart
Hay que bajarse el backend de souceforge, luego actualizar las fuentas, luego compilar e instalar.
http://sourceforge.net/project/showfiles.php?group_id=150599 Sería interesante que lo pusieras en la wiki (HCL/Scanner) para que la gente que lo tenga sepa por dónde empezar.
Saludos,
Mañana me instalo la OpenSuSE 11.0 de 64 bits, haré un guíaburros y lo colgaré en el HCL. Por cierto, sí que funciona Lineart.
P.D.: El escáner es más feo que pegarle a un padre, pero funciona muy bien. -- Saludos. César Enfréntate a los malos; enfréntate a los crueles; enfréntate a todos, menos a los tontos. Son demasiados y siempre serás derrotado. (Proverbio hindú) -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 El 2009-02-10 a las 18:33 +0100, csalinux escribió:
Hay que bajarse el backend de souceforge, luego actualizar las fuentas, luego compilar e instalar.
¿porque no pruebas el hplip de jsmeix? Hay un repo con las actualizaciones. http://download.opensuse.org/repositories/home:/jsmeix/openSUSE_11.0 Y si no la de packman. Jsmeix tiene la 2.8.7 y packman la 2.8.12. Pero vaya, que en cuanto pregunté en la lista inglesa por el soporte de mi impresora, que fallaba, el tío preparó el paquete nuevo de su repo esa misma semana. - -- Saludos Carlos E.R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) iEYEARECAAYFAkmR6mEACgkQtTMYHG2NR9XN+QCeJtEan97nplV1rcuvVD14GN37 v48AnRDZap2uGnmJpyAHBqg76wJWhMtM =+ehN -----END PGP SIGNATURE-----
Carlos E. R. escribió:
El 2009-02-10 a las 18:33 +0100, csalinux escribió:
Hay que bajarse el backend de souceforge, luego actualizar las fuentas, luego compilar e instalar.
¿porque no pruebas el hplip de jsmeix? Hay un repo con las actualizaciones.
http://download.opensuse.org/repositories/home:/jsmeix/openSUSE_11.0
Y si no la de packman. Jsmeix tiene la 2.8.7 y packman la 2.8.12.
Pero vaya, que en cuanto pregunté en la lista inglesa por el soporte de mi impresora, que fallaba, el tío preparó el paquete nuevo de su repo esa misma semana.
-- Saludos Carlos E.R.
No creo que funcione... pero mañana instalaré una nueva distro, meteré el paquete ese a ver qué hace. hplip está pensado para impresoras y para escáneres de multifunción. No he visto en ningún lado el escáner soportado, nada más que por el backend de sane. -- Saludos. César Enfréntate a los malos; enfréntate a los crueles; enfréntate a todos, menos a los tontos. Son demasiados y siempre serás derrotado. (Proverbio hindú) -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 El 2009-02-11 a las 00:59 +0100, csalinux escribió:
No creo que funcione... pero mañana instalaré una nueva distro, meteré el paquete ese a ver qué hace. hplip está pensado para impresoras y para escáneres de multifunción. No he visto en ningún lado el escáner soportado, nada más que por el backend de sane.
Ah, pues no lo sabía, mi escaner no es HP. Creía que hplip soportaba los escáneres. - -- Saludos Carlos E.R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) iEYEARECAAYFAkmSHhoACgkQtTMYHG2NR9WP1ACfcw6sBW2OGdJpC9EXrO6rG7g9 KgAAoIJKPuuH+pgJTxW9YhZiPiVtTb5N =+BNi -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 El 2009-02-10 a las 18:33 +0100, csalinux escribió:
Hola a todos.
Hoy he recibido el escáner hp G2710 y he logrado hacerlo funcionar en 32 y 64 bits. Funciona con kooka. No soporta lineart
...
Estado de soporte:
...
Status: This device is supposed to be managed by RTS882x chipset but I'vent got such scanner to make tests. [see note below]
Note: Trying to support a scanner without device in my hands is a very slow process because I don't see scanner's behaviour in each change in the driver. It would be great if someone borrows me any of above listed devices marked as "developing" for few weeks to accelerate process. After supporting device, it would be returned to its owner. You can also contribute making a donation to buy scanners which can be supported by this driver.//www.jkdsoft.cjb.net/
Vamos a ver, esto es lo que acabo de decir, HP no soporta linux. El pavo que lo está haciendo en hplip no tiene ese scaner para probarlo, ¡lo está haciendo a ciegas! ¡Está pidiendo que alguien se lo preste! Si HP soportara linux, el pavo tendría el escaner en la mesa de su despacho, nuevecito del almacén, antes de que lo pidiera. Hay que j***se :-/ - -- Saludos Carlos E.R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) iEYEARECAAYFAkmR62cACgkQtTMYHG2NR9WNkwCeJoJcENIVG6YLwOuJ2FBjDYJ5 ePYAnRgZ+FI5BxZRdHSSfApFEx6jdwv+ =ylcL -----END PGP SIGNATURE-----
Carlos E. R. escribió:
El 2009-02-10 a las 18:33 +0100, csalinux escribió:
Hola a todos.
Hoy he recibido el escáner hp G2710 y he logrado hacerlo funcionar en 32 y 64 bits. Funciona con kooka. No soporta lineart
...
Estado de soporte:
...
Status: This device is supposed to be managed by RTS882x chipset but I'vent got such scanner to make tests. [see note below]
Note: Trying to support a scanner without device in my hands is a very slow process because I don't see scanner's behaviour in each change in the driver. It would be great if someone borrows me any of above listed devices marked as "developing" for few weeks to accelerate process. After supporting device, it would be returned to its owner. You can also contribute making a donation to buy scanners which can be supported by this driver.//www.jkdsoft.cjb.net/
Vamos a ver, esto es lo que acabo de decir, HP no soporta linux. El pavo que lo está haciendo en hplip no tiene ese scaner para probarlo, ¡lo está haciendo a ciegas! ¡Está pidiendo que alguien se lo preste!
Si HP soportara linux, el pavo tendría el escaner en la mesa de su despacho, nuevecito del almacén, antes de que lo pidiera.
Hay que j***se :-/
-- Saludos Carlos E.R.
Es más, el tío ha escrito a hp pidiendo especificaciones y ni le han contestado, ni siquiera en el foro de hplip. -- Saludos. César Enfréntate a los malos; enfréntate a los crueles; enfréntate a todos, menos a los tontos. Son demasiados y siempre serás derrotado. (Proverbio hindú) -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
participants (3)
-
Camaleón
-
Carlos E. R.
-
csalinux