Linux version 2.4.19-16mdk (quintela@bi.mandrakesoft.com) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 255MB LOWMEM available. Advanced speculative caching feature not present On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda6 quiet devfs=mount hdc=ide-scsi hdd=ide-scsi vga=788 ide_setup: hdc=ide-scsi ide_setup: hdd=ide-scsi Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 896.013 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1789.13 BogoMIPS Memory: 256696k/262080k available (1176k kernel code, 4996k reserved, 444k data, 136k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000 CPU: AMD Duron(tm) Processor stepping 01 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 896.0316 MHz. ..... host bus clock speed is 199.1180 MHz. cpu: 0, clocks: 1991180, slice: 995590 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router SIS [1039/0008] at 00:01.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd VFS: Diskquotas version dquot_6.5.0 initialized devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 vesafb: framebuffer at 0xc0000000, mapped to 0xd0800000, size 65536k vesafb: mode is 800x600x16, linelength=1600, pages=3 vesafb: protected mode interface info at c000:0f3e vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (800x600, 30412 bytes). Console: switching to colour frame buffer device 80x16 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A PCI: Found IRQ 11 for device 00:01.6 PCI: Sharing IRQ 11 with 00:01.1 PCI: Sharing IRQ 11 with 00:0b.0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller on PCI bus 00 dev 01 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SiS730 ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA hda: ST320410A, ATA DISK drive hdb: ST340016A, ATA DISK drive hdc: HL-DT-ST CD-RW GCE-8240B, ATAPI CD/DVD-ROM drive hdd: HL-DT-STDVD-ROM GDR8160B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63, UDMA(100) hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 > /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 p7 p8 > RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 120k freed EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 136k freed Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 3 for device 00:01.3 PCI: Sharing IRQ 3 with 00:01.2 usb-ohci.c: USB OHCI at membase 0xd4933000, IRQ 3 usb-ohci.c: usb-00:01.3, Silicon Integrated Systems [SiS] 7001 (#2) usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected PCI: Found IRQ 3 for device 00:01.2 PCI: Sharing IRQ 3 with 00:01.3 usb-ohci.c: USB OHCI at membase 0xd4935000, IRQ 3 usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected usbdevfs: remount parameter error usb.c: registered new driver usblp printer.c: v0.11: USB Printer Device Class driver EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal Adding Swap: 602396k swap-space (priority -1) SCSI subsystem driver Revision: 1.00 Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: CD-RW GCE-8240B Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Vendor: HL-DT-ST Model: DVD-ROM GDR8160B Rev: 0009 Type: CD-ROM ANSI SCSI revision: 02 MSDOS FS: IO charset iso8859-15 MSDOS FS: Using codepage 850 MSDOS FS: IO charset iso8859-15 MSDOS FS: Using codepage 850 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,69), internal journal EXT3-fs: mounted filesystem with ordered data mode. MSDOS FS: IO charset iso8859-15 MSDOS FS: Using codepage 850 sis900.c: v1.08.04 4/25/2002 PCI: Found IRQ 11 for device 00:01.1 PCI: Sharing IRQ 11 with 00:01.6 PCI: Sharing IRQ 11 with 00:0b.0 eth0: Realtek RTL8201 PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xd000, IRQ 11, 00:07:95:0f:38:da. PCI: Found IRQ 5 for device 00:09.0 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:09.0: 3Com PCI 3c900 Cyclone 10Mbps TPO at 0xcc00. Vers LK1.1.16