<4>Linux version 2.4.20-4GB (root@Pentium.suse.de) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #1 Mon Mar 17 17:54:44 UTC 2003 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) <4> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) <4> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) <4> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) <4>Scanning bios EBDA for MXT signature <5>0MB HIGHMEM available. <5>255MB LOWMEM available. <7>ACPI: have wakeup address 0xc0001000 <4>On node 0 totalpages: 65520 <4>zone(0): 4096 pages. <4>zone(1): 61424 pages. <4>zone(2): 0 pages. <5>ACPI disabled because your bios is from 97 and too old <5>You can enable it with acpi=force <4>Building zonelist for node : 0 <4>Kernel command line: BOOT_IMAGE=linux SuSE=,1203300400,7F1E242C., initrd=initrd ramdisk_size=65536 vga=0x317 ide=nodma apm=off acpi=off <6>ide_setup: ide=nodma : Prevented DMA <6>Initializing CPU#0 <4>Detected 896.013 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 1789.13 BogoMIPS <6>Memory: 250768k/262080k available (1569k kernel code, 10924k reserved, 574k data, 160k init, 0k highmem) <6>Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) <6>Inode cache hash table entries: 16384 (order: 5, 131072 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) <4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 64K (64 bytes/line) <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 <7>CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 <4>CPU: AMD Duron(tm) Processor stepping 01 <6>Enabling fast FPU save and restore... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <6>ACPI: Subsystem revision 20030228 <6>ACPI: Disabled via command line (acpi=off) <6>PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 <6>PCI: Using configuration type 1 <6>PCI: Probing PCI hardware <4>PCI: ACPI tables contain no PCI IRQ routing entries <4>PCI: Probing PCI hardware (bus 00) <6>PCI: Using IRQ router SIS [1039/0008] at 00:01.0 <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) <5>apm: disabled on user request. <4>mxt_scan_bios: enter <4>Starting kswapd <4>bigpage subsystem: allocated 0 bigpages (=0MB). <4>kinoded started <5>VFS: Disk quotas vdquot_6.5.1 <5>aio_setup: num_physpages = 16380 <5>aio_setup: sizeof(struct page) = 48 <6>vesafb: framebuffer at 0xc0000000, mapped to 0xd080d000, size 65536k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=0 <6>vesafb: protected mode interface info at c000:0f3e <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>Looking for splash picture.... found (1024x768, 23130 bytes, v3). <4>Console: switching to colour frame buffer device 118x38 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>PCI: Found IRQ 11 for device 00:01.6 <6>PCI: Sharing IRQ 11 with 00:01.1 <6>PCI: Sharing IRQ 11 with 00:0b.0 <6>Real Time Clock Driver v1.10e <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize <6>loop: loaded (max 16 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>SIS5513: IDE controller at PCI slot 00:00.1 <6>SIS5513: chipset revision 208 <6>SIS5513: not 100% native mode: will probe irqs later <4>SiS730 ATA 100 controller <6> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA <6> ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA <4>hda: ST320410A, ATA DISK drive <4>hdb: ST340016A, ATA DISK drive <4>hdc: HL-DT-ST CD-RW GCE-8240B, ATAPI CD/DVD-ROM drive <4>hdd: HL-DT-STDVD-ROM GDR8160B, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: attached ide-disk driver. <4>hda: host protected area => 1 <6>hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63 <4>hdb: attached ide-disk driver. <4>hdb: host protected area => 1 <6>hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63 <4>ide-floppy driver 0.99.newide <6>Partition check: <6> hda: hda1 hda2 < hda5 hda6 hda7 hda8 > <6> hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 > <4>ide-floppy driver 0.99.newide <6>SCSI subsystem driver Revision: 1.00 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 2048 buckets, 16Kbytes <6>TCP: Hash tables configured (established 16384 bind 32768) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 4964k freed <4>VFS: Mounted root (minix filesystem). <4>ide-floppy driver 0.99.newide <4>ide-floppy driver 0.99.newide <6>Non-volatile memory driver v1.2 <4>hdc: attached ide-cdrom driver. <4>hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <4>hdd: attached ide-cdrom driver. <4>hdd: ATAPI 48X DVD-ROM drive, 512kB Cache <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <6>cdrom: open failed. <6>usb.c: registered new driver usbdevfs <6>usb.c: registered new driver hub <6>PCI: Found IRQ 3 for device 00:01.3 <6>PCI: Sharing IRQ 3 with 00:01.2 <6>usb-ohci.c: USB OHCI at membase 0xd4822000, IRQ 3 <6>usb-ohci.c: usb-00:01.3, Silicon Integrated Systems [SiS] 7001 (#2) <6>usb.c: new USB bus registered, assigned bus number 1 <6>hub.c: USB hub found <6>hub.c: 3 ports detected <6>PCI: Found IRQ 3 for device 00:01.2 <6>PCI: Sharing IRQ 3 with 00:01.3 <6>usb-ohci.c: USB OHCI at membase 0xd4824000, IRQ 3 <6>usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001 <6>usb.c: new USB bus registered, assigned bus number 2 <6>hub.c: USB hub found <6>hub.c: 3 ports detected <6>usb.c: registered new driver hiddev <6>usb.c: registered new driver hid <6>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <6>hid-core.c: USB HID support drivers <6>Initializing USB Mass Storage driver... <6>usb.c: registered new driver usb-storage <6>USB Mass Storage support registered. <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <6>cdrom: open failed. <7>ISO 9660 Extensions: Microsoft Joliet Level 3 <7>ISO 9660 Extensions: RRIP_1991A <6>usb.c: deregistering driver usb-storage