Hi Liste
Wo muß ich suchen?
Ich habe folgendes Problem:
Ich komme per Telnet nicht zu einem Rechner außerhalb der eigenen
vier Wände. Internetzugriff über einen Router funktioniert aber,
genauso wie der Zugriff von anderen Rechnern über das Netz (Apache,
Telnet, ping). Ich kann auch ein ping ins eigene Netzwerk über
Namensauflösung absetzen und es funktioniert.
pinguin:/home/martin # ping -c 3 laptop1
PING laptop1.ebfnet (192.168.1.10) from 192.168.1.250 : 56(84) bytes
of data.
64 bytes from laptop1.ebfnet (192.168.1.10): icmp_seq=1 ttl=128
time=0.810 ms
64 bytes from laptop1.ebfnet (192.168.1.10): icmp_seq=2 ttl=128
time=0.537 ms
64 bytes from laptop1.ebfnet (192.168.1.10): icmp_seq=3 ttl=128
time=0.543 ms
pinguin:/home/martin # route -F
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref
Use Iface
192.168.1.0 pinguin.ebfnet 255.255.255.0 UG 0 0
0 eth0
192.168.1.0 * 255.255.255.0 U 0 0
0 eth0
pinguin:/home/martin # route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref
Use Iface
192.168.1.0 192.168.1.250 255.255.255.0 UG 0 0
0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0
0 eth0
pinguin:/home/martin # ifstatus eth0
eth0 is up
2: eth0:
From: Mathias Homann
pinguin:/home/martin # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 192.168.1.250 255.255.255.0 UG 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
du hast kein default gateway konfiguriert.
Hallo Mathias default-Gateway habe ich inzwischen eingerichtet. Geht trotzdem nicht Gruß Martin
participants (2)
-
Martin Falley
-
Mathias Homann