![](https://seccdn.libravatar.org/avatar/9da85cef2ee595dc7b94a11d0cd7b24f.jpg?s=120&d=mm&r=g)
Hallo,
seit meinem Umstieg von SuSe 8.2 auf 9.0 geht meine US Robotics Wlan Karte in
dem PCI Adapter nicht mehr.
Nein es ist kein Notebook Problem da es sich um eine PCMCIA Karte in einem PCI
Adapter handelt, die in ein Desktop eingebaut ist (Nur wegen der lästigen
Hinweise auf die Notebook Liste)
Das Modul orinoco_plx läst sich nicht mehr laden.
Goggeln hat auch nicht geholfen ( um mir diesen Hinweis ebenfalls zu ersparen)
modprobe orinoco_plx
liefert folgende Ausgabe :
/lib/modules/2.4.21-166-athlon/kernel/drivers/net/wireless/orinoco_plx.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21-166-athlon/kernel/drivers/net/wireless/orinoco_plx.o:
insmod /lib/modules/2.4.21-166-athlon/kernel/drivers/net/wireless/
orinoco_plx.o failed
/lib/modules/2.4.21-166-athlon/pcmcia-external/orinoco_plx.o: init_module: No
such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21-166-athlon/pcmcia-external/orinoco_plx.o: insmod /lib/
modules/2.4.21-166-athlon/pcmcia-external/orinoco_plx.o failed
/lib/modules/2.4.21-166-athlon/pcmcia-external/orinoco_plx.o: insmod
orinoco_plx failed
Yast erkennt die Karte ebenfalls nicht. Es werden zwei !! FEATRON
Netzwerkcontroler angezeigt und zwei ? weitere Netzwerkcontroler, die ich
nicht habe. Aussdem wird noch die vorhendene Realtek angezeigt.
hwinfo --network
01: None 00.0: 10700 Loopback
[Created at net.66]
Unique ID: n6T_.GQNx7L4uPNA
Hardware Class: network interface
Model: "Loopback network interface"
Device File: lo
Config Status: cfg=no, avail=yes, need=no, active=unknown
02: None 00.0: 10701 Ethernet
[Created at net.66]
Unique ID: Phe5.ndpeucax6V1
Hardware Class: network interface
Model: "Ethernet network interface"
Device File: eth0
Config Status: cfg=no, avail=yes, need=no, active=unknown
03: None 00.0: 10781 Network Interface
[Created at net.66]
Unique ID: RaT_.nfEXJulusj6
Hardware Class: network interface
Model: "Network Interface"
Device File: sit0
Config Status: cfg=no, avail=yes, need=no, active=unknown
Zeigt mir die karte auch nicht aber was ist sit0 ?
in /var/log/messages steht leider nicht viel :
Feb 19 16:54:08 workplace kernel: orinoco.c 0.13e (David Gibson
participants (1)
-
Stefan Manteuffel